Closed simoncozens closed 1 month ago
Main change is that some dots are made larger. Please note this font has a really unusual build process (it's made from a fontforge-based Python script); there's not much I can do about any fontbakery fails.
fontbakery version: 0.12.6
These won't break the CI job for now, but will become effective after some time if nobody raises any concern.
The following glyphs could not be attached to the dotted circle glyph:
- tildecomb
- uni030A
- uni030B
- uni0326
- uni0327
- uni0328
[code: unattached-dotted-circle-marks]
DESCRIPTION.en_us.html must have size larger than 200 bytes.
[code: too-short]Post table format 3 use has niche use case problems.Please review the check rationale for additional details.
[code: post-table-version]The following mark characters could be in the GDEF mark glyph class: u1BC9D (U+1BC9D)
[code: mark-chars]dcaron is decomposed and therefore could not be checked. Please check manually.
[code: decomposed-outline] * ⚠️ **WARN**Lcaron is decomposed and therefore could not be checked. Please check manually.
[code: decomposed-outline] * ⚠️ **WARN**lcaron is decomposed and therefore could not be checked. Please check manually.
[code: decomposed-outline] * ⚠️ **WARN**tcaron is decomposed and therefore could not be checked. Please check manually.
[code: decomposed-outline]This check inspects the glyph outlines and detects the total number of contours in each of them. The expected values are infered from the typical ammounts of contours observed in a large collection of reference font families. The divergences listed below may simply indicate a significantly different design on some of your glyphs. On the other hand, some of these may flag actual bugs in the font such as glyphs mapped to an incorrect codepoint. Please consider reviewing the design and codepoint assignment of these to make sure they are correct.
The following glyphs do not have the recommended number of contours:
- Glyph name: aogonek Contours detected: 3 Expected: 2
- Glyph name: uogonek Contours detected: 2 Expected: 1
- Glyph name: aogonek Contours detected: 3 Expected: 2
- Glyph name: uogonek Contours detected: 2 Expected: 1
[code: contour-count]
The most common width is 654 among a set of 1 math glyphs. The following math glyphs have a different width, though:
Width = 1131: less
Width = 740: equal
Width = 1130: greater
Width = 593: multiply
Width = 572: divide
Width = 322: minus
[code: width-outliers]ots-sanitize passed this file, however warnings were printed:
WARNING: Layout: tags aren't arranged alphabetically. WARNING: Layout: tags aren't arranged alphabetically.
[code: ots-sanitize-warn]The following glyphs could not be reached by codepoint or substitution rules:
- glyph10240
- glyph10336
[code: unreachable-glyphs]
The following glyphs have jaggy segments:
* glyph00596: B<<210.0,355.5>-<210.0,358.0>-<211.0,359.0>>/B<<211.0,359.0>-<181.0,333.0>-<167.5,296.5>> = 4.085616779974888
* glyph01008: B<<472.5,296.5>-<459.0,333.0>-<429.0,359.0>>/B<<429.0,359.0>-<430.0,358.0>-<430.0,355.5>> = 4.085616779974888
[code: found-jaggy-segments]
The following glyphs have a counter-clockwise outer contour:
* degree (U+00B0) has a counter-clockwise outer contour
* eight (U+0038) has a counter-clockwise outer contour
* glyph00193 has a counter-clockwise outer contour
* glyph00194 has a counter-clockwise outer contour
* glyph00195 has a counter-clockwise outer contour
* glyph00196 has a counter-clockwise outer contour
* glyph00199 has a counter-clockwise outer contour
* glyph00209 has a counter-clockwise outer contour
* glyph00210 has a counter-clockwise outer contour
* glyph00211 has a counter-clockwise outer contour
* 2274 more.
Use -F or --full-lists to disable shortening of long lists.
[code: ccw-outer-contour]The following codepoints supported by the font are not covered by any subsets defined in the font's metadata file, and will never be served. You can solve this by either manually adding additional subset declarations to METADATA.pb, or by editing the glyphset definitions.
Use -F or --full-lists to disable shortening of long lists.
Or you can add the above codepoints to one of the subsets supported by the font: duployan
, latin
, latin-ext
, menu
Font file is 1.7Mb; ideally it should be less than 1.0Mb
[code: large-font]This font file does not have a 'meta' table.
[code: lacks-meta-table]This font contains the following optional tables:
- loca
- prep
- GPOS
- GSUB
- gasp
[code: optional-tables]
EPAR table not present in font. To learn more see https://github.com/fonttools/fontbakery/issues/818
[code: lacks-EPAR]These are the ppm ranges declared on the gasp table:
PPM <= 65535: flag = 0x0F - Use grid-fitting - Use grayscale rendering - Use gridfitting with ClearType symmetric smoothing - Use smoothing along multiple axes with ClearType®
[code: ranges]Hinting filesize impact:
ofl/notosansduployan/NotoSansDuployan-Regular.ttf | |
---|---|
Dehinted Size | 1.7Mb |
Hinted Size | 1.7Mb |
Increase | 24 bytes |
Change | 0.0 % |
Could not detect which version of ttfautohint was used in this font. It is typically specified as a comment in the font version entries of the 'name' table. Such font version strings are currently: ['Version 3.002']
[code: version-not-detected]The following glyphs could not be attached to the dotted circle glyph:
- tildecomb
- uni030A
- uni030B
- uni0326
- uni0327
- uni0328
[code: unattached-dotted-circle-marks]
DESCRIPTION.en_us.html must have size larger than 200 bytes.
[code: too-short]Post table format 3 use has niche use case problems.Please review the check rationale for additional details.
[code: post-table-version]The following mark characters could be in the GDEF mark glyph class: u1BC9D (U+1BC9D)
[code: mark-chars]dcaron is decomposed and therefore could not be checked. Please check manually.
[code: decomposed-outline] * ⚠️ **WARN**Lcaron is decomposed and therefore could not be checked. Please check manually.
[code: decomposed-outline] * ⚠️ **WARN**lcaron is decomposed and therefore could not be checked. Please check manually.
[code: decomposed-outline] * ⚠️ **WARN**tcaron is decomposed and therefore could not be checked. Please check manually.
[code: decomposed-outline]This check inspects the glyph outlines and detects the total number of contours in each of them. The expected values are infered from the typical ammounts of contours observed in a large collection of reference font families. The divergences listed below may simply indicate a significantly different design on some of your glyphs. On the other hand, some of these may flag actual bugs in the font such as glyphs mapped to an incorrect codepoint. Please consider reviewing the design and codepoint assignment of these to make sure they are correct.
The following glyphs do not have the recommended number of contours:
- Glyph name: aogonek Contours detected: 3 Expected: 2
- Glyph name: uogonek Contours detected: 2 Expected: 1
- Glyph name: aogonek Contours detected: 3 Expected: 2
- Glyph name: uogonek Contours detected: 2 Expected: 1
[code: contour-count]
The most common width is 1161 among a set of 2 math glyphs. The following math glyphs have a different width, though:
Width = 686: plus
Width = 770: equal
Width = 624: multiply
Width = 572: divide
Width = 322: minus
[code: width-outliers]ots-sanitize passed this file, however warnings were printed:
WARNING: Layout: tags aren't arranged alphabetically. WARNING: Layout: tags aren't arranged alphabetically.
[code: ots-sanitize-warn]The following glyphs could not be reached by codepoint or substitution rules:
- glyph10355
- glyph10451
[code: unreachable-glyphs]
The following glyphs have jaggy segments:
* W (U+0057): B<<266.0,196.0>-<272.0,161.0>-<275.0,137.0>>/B<<275.0,137.0>-<278.0,162.0>-<284.0,196.5>> = 13.967789761532726
* W (U+0057): B<<489.0,505.5>-<485.0,529.0>-<483.0,542.0>>/B<<483.0,542.0>-<482.0,529.0>-<477.5,505.5>> = 13.144867617550734
* W (U+0057): B<<683.0,196.0>-<689.0,161.0>-<692.0,137.0>>/B<<692.0,137.0>-<695.0,162.0>-<701.0,196.5>> = 13.967789761532726
* Wacute (U+1E82): B<<266.0,196.0>-<272.0,161.0>-<275.0,137.0>>/B<<275.0,137.0>-<278.0,162.0>-<284.0,196.5>> = 13.967789761532726
* Wacute (U+1E82): B<<489.0,505.5>-<485.0,529.0>-<483.0,542.0>>/B<<483.0,542.0>-<482.0,529.0>-<477.5,505.5>> = 13.144867617550734
* Wacute (U+1E82): B<<683.0,196.0>-<689.0,161.0>-<692.0,137.0>>/B<<692.0,137.0>-<695.0,162.0>-<701.0,196.5>> = 13.967789761532726
* Wcircumflex (U+0174): B<<266.0,196.0>-<272.0,161.0>-<275.0,137.0>>/B<<275.0,137.0>-<278.0,162.0>-<284.0,196.5>> = 13.967789761532726
* Wcircumflex (U+0174): B<<489.0,505.5>-<485.0,529.0>-<483.0,542.0>>/B<<483.0,542.0>-<482.0,529.0>-<477.5,505.5>> = 13.144867617550734
* Wcircumflex (U+0174): B<<683.0,196.0>-<689.0,161.0>-<692.0,137.0>>/B<<692.0,137.0>-<695.0,162.0>-<701.0,196.5>> = 13.967789761532726
* Wdieresis (U+1E84): B<<266.0,196.0>-<272.0,161.0>-<275.0,137.0>>/B<<275.0,137.0>-<278.0,162.0>-<284.0,196.5>> = 13.967789761532726
* 148 more.
Use -F or --full-lists to disable shortening of long lists.
[code: found-jaggy-segments]The following glyphs have a counter-clockwise outer contour:
* degree (U+00B0) has a counter-clockwise outer contour
* eight (U+0038) has a counter-clockwise outer contour
* glyph00193 has a counter-clockwise outer contour
* glyph00194 has a counter-clockwise outer contour
* glyph00195 has a counter-clockwise outer contour
* glyph00196 has a counter-clockwise outer contour
* glyph00199 has a counter-clockwise outer contour
* glyph00209 has a counter-clockwise outer contour
* glyph00210 has a counter-clockwise outer contour
* glyph00211 has a counter-clockwise outer contour
* 2316 more.
Use -F or --full-lists to disable shortening of long lists.
[code: ccw-outer-contour]The following codepoints supported by the font are not covered by any subsets defined in the font's metadata file, and will never be served. You can solve this by either manually adding additional subset declarations to METADATA.pb, or by editing the glyphset definitions.
Use -F or --full-lists to disable shortening of long lists.
Or you can add the above codepoints to one of the subsets supported by the font: duployan
, latin
, latin-ext
, menu
Font file is 1.7Mb; ideally it should be less than 1.0Mb
[code: large-font]GPOS table lacks kerning info for the following non-ligated sequences:
- f + f
- f + i
- f + l
[code: lacks-kern-info]
This font file does not have a 'meta' table.
[code: lacks-meta-table]This font contains the following optional tables:
- loca
- prep
- GPOS
- GSUB
- gasp
[code: optional-tables]
EPAR table not present in font. To learn more see https://github.com/fonttools/fontbakery/issues/818
[code: lacks-EPAR]These are the ppm ranges declared on the gasp table:
PPM <= 65535: flag = 0x0F - Use grid-fitting - Use grayscale rendering - Use gridfitting with ClearType symmetric smoothing - Use smoothing along multiple axes with ClearType®
[code: ranges]Hinting filesize impact:
ofl/notosansduployan/NotoSansDuployan-Bold.ttf | |
---|---|
Dehinted Size | 1.7Mb |
Hinted Size | 1.7Mb |
Increase | 24 bytes |
Change | 0.0 % |
Could not detect which version of ttfautohint was used in this font. It is typically specified as a comment in the font version entries of the 'name' table. Such font version strings are currently: ['Version 3.002']
[code: version-not-detected]💥 ERROR | ☠ FATAL | 🔥 FAIL | ⚠️ WARN | ⏩ SKIP | ℹ️ INFO | ✅ PASS | 🔎 DEBUG |
---|---|---|---|---|---|---|---|
0 | 0 | 4 | 25 | 132 | 15 | 308 | 0 |
0% | 0% | 1% | 5% | 27% | 3% | 64% | 0% |
Note: The following loglevels were omitted in this report:
Taken from the upstream repo https://github.com/notofonts/duployan at commit https://github.com/notofonts/duployan/commit/dcec488da5e9c16d48051fe8d20b1b615bf8c9be.
PR Checklist: