Closed simoncozens closed 1 month ago
fontbakery version: 0.12.6
These won't break the CI job for now, but will become effective after some time if nobody raises any concern.
GF_Latin_Core glyphset:
Language | FAIL messages |
---|---|
nl_Latn (Dutch) | Shaper didn't attach acutecomb to j.sc |
GF_Cyrillic_Core glyphset:
Language | FAIL messages |
---|---|
uk_Cyrl (Ukrainian) | Some base glyphs were missing: ґ |
^ | Shaper produced a .notdef |
GF_Cyrillic_Core glyphset:
Language | WARN messages |
---|---|
uk_Cyrl (Ukrainian) | Some auxiliary glyphs were missing: ґ |
This check inspects the glyph outlines and detects the total number of contours in each of them. The expected values are infered from the typical ammounts of contours observed in a large collection of reference font families. The divergences listed below may simply indicate a significantly different design on some of your glyphs. On the other hand, some of these may flag actual bugs in the font such as glyphs mapped to an incorrect codepoint. Please consider reviewing the design and codepoint assignment of these to make sure they are correct.
The following glyphs do not have the recommended number of contours:
- Glyph name: exclam Contours detected: 5 Expected: 2
- Glyph name: quotedbl Contours detected: 5 Expected: 2
- Glyph name: numbersign Contours detected: 6 Expected: 2
- Glyph name: percent Contours detected: 9 Expected: 4 or 5
- Glyph name: ampersand Contours detected: 6 Expected: 1, 2 or 3
- Glyph name: quotesingle Contours detected: 3 Expected: 1
- Glyph name: parenleft Contours detected: 3 Expected: 1
- Glyph name: parenright Contours detected: 3 Expected: 1
- Glyph name: asterisk Contours detected: 3 Expected: 1 or 4
- Glyph name: plus Contours detected: 3 Expected: 1
- 1290 more.
Use -F or --full-lists to disable shortening of long lists.
[code: contour-count]The most common width is 269 among a set of 4 math glyphs. The following math glyphs have a different width, though:
Width = 412: plus
Width = 359: equal
Width = 500: logicalnot
Width = 398: plusminus
Width = 394: multiply
Width = 351: divide
Width = 456: minus
Width = 593: approxequal
Width = 424: notequal
[code: width-outliers]This font has a 'Soft Hyphen' character.
[code: softhyphen]The following glyphs could not be reached by codepoint or substitution rules:
- Euro.oldstyle
- ampersand.001
- ampersand.002
- arrow_bottom_left
- arrow_bottom_right
- arrow_down
- arrow_left
- arrow_right
- arrow_top_left
- arrow_top_right
- 13 more.
Use -F or --full-lists to disable shortening of long lists.
[code: unreachable-glyphs]The following glyphs have jaggy segments:
* A (U+0041): L<<197.0,184.0>--<204.0,291.0>>/L<<204.0,291.0>--<211.0,184.0>> = 7.485976591374219
* A (U+0041): L<<219.0,175.0>--<204.0,450.0>>/L<<204.0,450.0>--<188.0,175.0>> = 6.451949190967401
* A.ss01: L<<218.0,158.0>--<223.0,256.0>>/L<<223.0,256.0>--<227.0,158.0>> = 5.258027380124218
* A.ss01: L<<236.0,149.0>--<223.0,376.0>>/L<<223.0,376.0>--<210.0,149.0>> = 6.555351904380469
* AE (U+00C6): L<<201.0,184.0>--<208.0,302.0>>/L<<208.0,302.0>--<215.0,184.0>> = 6.789847084236596
* AE (U+00C6): L<<209.0,428.0>--<208.0,450.0>>/L<<208.0,450.0>--<206.0,428.0>> = 7.796991110234607
* AE.ss01: L<<180.0,158.0>--<184.0,230.0>>/L<<184.0,230.0>--<189.0,158.0>> = 7.152326060614876
* AE.ss01: L<<185.0,357.0>--<184.0,376.0>>/L<<184.0,376.0>--<183.0,357.0>> = 6.025575008366673
* AEacute (U+01FC): L<<201.0,184.0>--<208.0,302.0>>/L<<208.0,302.0>--<215.0,184.0>> = 6.789847084236596
* AEacute (U+01FC): L<<209.0,428.0>--<208.0,450.0>>/L<<208.0,450.0>--<206.0,428.0>> = 7.796991110234607
* 374 more.
Use -F or --full-lists to disable shortening of long lists.
[code: found-jaggy-segments]The following glyphs have semi-vertical/semi-horizontal lines:
* arrow_down: L<<226.0,39.0>--<225.0,504.0>>
* arrow_down: L<<350.0,504.0>--<352.0,38.0>>
* arrow_left: L<<271.0,322.0>--<736.0,325.0>>
* arrow_left: L<<736.0,199.0>--<269.0,197.0>>
* arrow_right: L<<31.0,325.0>--<496.0,322.0>>
* arrow_right: L<<497.0,197.0>--<31.0,199.0>>
* arrow_up: L<<225.0,-201.0>--<226.0,264.0>>
* arrow_up: L<<352.0,266.0>--<350.0,-201.0>>
* estimated (U+212E): L<<182.0,247.0>--<183.0,96.0>>
* estimated (U+212E): L<<183.0,376.0>--<182.0,259.0>>
* 9 more.
Use -F or --full-lists to disable shortening of long lists.
[code: found-semi-vertical]No dotted circle glyph present
[code: missing-dotted-circle]The dot of soft dotted characters used in orthographies must disappear in the following strings: į̀ į́ į̂ į̃ į̄ į̌ і́ ị̀ ị́ ị̂ ị̃ ị̄
The dot of soft dotted characters should disappear in other cases, for example: į̆ į̇ į̈ į̉ į̊ į̋ į̏ į̑ į̒ į̛̏ į̛̑ į̛̒ į̣̀ į̣́ į̣̂ į̣̃ į̣̄ į̣̆ į̣̇ į̣̈
Your font fully covers the following languages that require the soft-dotted feature: Lithuanian (Latn, 2,357,094 speakers), Belarusian (Cyrl, 10,064,517 speakers).
Your font does not cover the following languages that require the soft-dotted feature: Kpelle, Guinea (Latn, 622,000 speakers), Makaa (Latn, 221,000 speakers), Bafut (Latn, 158,146 speakers), Mundani (Latn, 34,000 speakers), Basaa (Latn, 332,940 speakers), Dan (Latn, 1,099,244 speakers), Kom (Latn, 360,685 speakers), Ebira (Latn, 2,200,000 speakers), Igbo (Latn, 27,823,640 speakers), Ekpeye (Latn, 226,000 speakers), Vute (Latn, 21,000 speakers), Nzakara (Latn, 50,000 speakers), Aghem (Latn, 38,843 speakers), Gulay (Latn, 250,478 speakers), Ma’di (Latn, 584,000 speakers), Zapotec (Latn, 490,000 speakers), Navajo (Latn, 166,319 speakers), Dii (Latn, 71,000 speakers), Nateni (Latn, 100,000 speakers), Ngbaka (Latn, 1,020,000 speakers), Mfumte (Latn, 79,000 speakers), Ejagham (Latn, 120,000 speakers), Mango (Latn, 77,000 speakers), Ijo, Southeast (Latn, 2,471,000 speakers), Yala (Latn, 200,000 speakers), Dutch (Latn, 31,709,104 speakers), Lugbara (Latn, 2,200,000 speakers), Koonzime (Latn, 40,000 speakers), Sar (Latn, 500,000 speakers), Southern Kisi (Latn, 360,000 speakers), Avokaya (Latn, 100,000 speakers), Fur (Latn, 1,230,163 speakers), Ukrainian (Cyrl, 29,273,587 speakers), Bete-Bendi (Latn, 100,000 speakers), Cicipu (Latn, 44,000 speakers), South Central Banda (Latn, 244,000 speakers).
[code: soft-dotted]The following codepoints supported by the font are not covered by any subsets defined in the font's metadata file, and will never be served. You can solve this by either manually adding additional subset declarations to METADATA.pb, or by editing the glyphset definitions.
Use -F or --full-lists to disable shortening of long lists.
Or you can add the above codepoints to one of the subsets supported by the font: cyrillic
, latin
, latin-ext
, menu
, vietnamese
Name ID 6 'AlumniSansCollegiateOneSC-Regular' exceeds 27 characters. This has been found to cause problems with PostScript printers, especially on Mac platforms.
[code: nameid6-too-long]GPOS table lacks kerning info for the following non-ligated sequences:
- f + f
- f + i
- f + l
[code: lacks-kern-info]
This font lacks caret position values for ligature glyphs on its GDEF table.
[code: lacks-caret-pos]This font file does not have a 'meta' table.
[code: lacks-meta-table]The stylistic set ss01 lacks a description string on the 'name' table.
[code: missing-description]ofl/alumnisanscollegiateone
[code: family-path] * ℹ️ **INFO**ofl/alumnisanscollegiateonesc
[code: family-path]This font contains the following optional tables:
- loca
- prep
- GPOS
- GSUB
- gasp
[code: optional-tables]
Found a git repo URL: https://github.com/googlefonts/alumni-sans-collegiate
[code: url-found]This font doesn't have an ARTICLE.en_us.html file.
[code: missing-article]EPAR table not present in font. To learn more see https://github.com/fonttools/fontbakery/issues/818
[code: lacks-EPAR]These are the ppm ranges declared on the gasp table:
PPM <= 65535: flag = 0x0F - Use grid-fitting - Use grayscale rendering - Use gridfitting with ClearType symmetric smoothing - Use smoothing along multiple axes with ClearType®
[code: ranges]Hinting filesize impact:
ofl/alumnisanscollegiateonesc/AlumniSansCollegiateOneSC-Regular.ttf | |
---|---|
Dehinted Size | 142.5kb |
Hinted Size | 142.5kb |
Increase | 24 bytes |
Change | 0.0 % |
Could not detect which version of ttfautohint was used in this font. It is typically specified as a comment in the font version entries of the 'name' table. Such font version strings are currently: ['Version 1.100']
[code: version-not-detected]GF_Latin_Core glyphset:
Language | FAIL messages |
---|---|
nl_Latn (Dutch) | Shaper didn't attach acutecomb.case to J |
^ | Shaper didn't attach acutecomb to j.sc |
GF_Cyrillic_Core glyphset:
Language | FAIL messages |
---|---|
uk_Cyrl (Ukrainian) | Some base glyphs were missing: ґ |
^ | Shaper produced a .notdef |
GF_Cyrillic_Core glyphset:
Language | WARN messages |
---|---|
uk_Cyrl (Ukrainian) | Some auxiliary glyphs were missing: ґ |
This check inspects the glyph outlines and detects the total number of contours in each of them. The expected values are infered from the typical ammounts of contours observed in a large collection of reference font families. The divergences listed below may simply indicate a significantly different design on some of your glyphs. On the other hand, some of these may flag actual bugs in the font such as glyphs mapped to an incorrect codepoint. Please consider reviewing the design and codepoint assignment of these to make sure they are correct.
The following glyphs do not have the recommended number of contours:
- Glyph name: exclam Contours detected: 5 Expected: 2
- Glyph name: quotedbl Contours detected: 5 Expected: 2
- Glyph name: numbersign Contours detected: 6 Expected: 2
- Glyph name: percent Contours detected: 9 Expected: 4 or 5
- Glyph name: ampersand Contours detected: 6 Expected: 1, 2 or 3
- Glyph name: quotesingle Contours detected: 3 Expected: 1
- Glyph name: parenleft Contours detected: 3 Expected: 1
- Glyph name: parenright Contours detected: 3 Expected: 1
- Glyph name: asterisk Contours detected: 3 Expected: 1 or 4
- Glyph name: plus Contours detected: 3 Expected: 1
- 1292 more.
Use -F or --full-lists to disable shortening of long lists.
[code: contour-count]The most common width is 348 among a set of 2 math glyphs. The following math glyphs have a different width, though:
Width = 412: plus
Width = 347: less
Width = 360: equal
Width = 269: greater
Width = 501: logicalnot
Width = 478: plusminus
Width = 393: multiply
Width = 352: divide
Width = 457: minus
Width = 595: approxequal
Width = 424: notequal
[code: width-outliers]This font has a 'Soft Hyphen' character.
[code: softhyphen]The following glyphs could not be reached by codepoint or substitution rules:
- Euro.oldstyle
- ampersand.001
- ampersand.002
- arrow_bottom_left
- arrow_bottom_right
- arrow_down
- arrow_left
- arrow_right
- arrow_top_left
- arrow_top_right
- 12 more.
Use -F or --full-lists to disable shortening of long lists.
[code: unreachable-glyphs]The following glyphs have jaggy segments:
* A (U+0041): L<<185.0,184.0>--<207.0,291.0>>/B<<207.0,291.0>-<206.0,276.0>-<204.5,256.0>> = 7.8044495185042875
* A (U+0041): L<<206.0,175.0>--<230.0,450.0>>/L<<230.0,450.0>--<175.0,175.0>> = 6.322210958954923
* A.ss01: L<<205.0,158.0>--<224.0,256.0>>/L<<224.0,256.0>--<214.0,158.0>> = 5.145898208255821
* A.ss01: L<<222.0,149.0>--<241.0,376.0>>/L<<241.0,376.0>--<196.0,149.0>> = 6.42829138814691
* AE (U+00C6): L<<191.0,184.0>--<215.0,302.0>>/L<<215.0,302.0>--<205.0,184.0>> = 6.652562642505048
* AE (U+00C6): L<<234.0,428.0>--<236.0,450.0>>/L<<236.0,450.0>--<231.0,428.0>> = 7.609837157551915
* AE.ss01: L<<162.0,158.0>--<176.0,230.0>>/L<<176.0,230.0>--<171.0,158.0>> = 7.031044910998857
* AE.ss01: L<<195.0,357.0>--<197.0,376.0>>/L<<197.0,376.0>--<193.0,357.0>> = 5.879652082133342
* AEacute (U+01FC): L<<191.0,184.0>--<215.0,302.0>>/L<<215.0,302.0>--<205.0,184.0>> = 6.652562642505048
* AEacute (U+01FC): L<<234.0,428.0>--<236.0,450.0>>/L<<236.0,450.0>--<231.0,428.0>> = 7.609837157551915
* 353 more.
Use -F or --full-lists to disable shortening of long lists.
[code: found-jaggy-segments]No dotted circle glyph present
[code: missing-dotted-circle]The dot of soft dotted characters used in orthographies must disappear in the following strings: į̀ į́ į̂ į̃ į̄ į̌ і́ ị̀ ị́ ị̂ ị̃ ị̄
The dot of soft dotted characters should disappear in other cases, for example: į̆ į̇ į̈ į̉ į̊ į̋ į̏ į̑ į̒ į̛̏ į̛̑ į̛̒ į̣̀ į̣́ į̣̂ į̣̃ į̣̄ į̣̆ į̣̇ į̣̈
Your font fully covers the following languages that require the soft-dotted feature: Lithuanian (Latn, 2,357,094 speakers), Belarusian (Cyrl, 10,064,517 speakers).
Your font does not cover the following languages that require the soft-dotted feature: Kpelle, Guinea (Latn, 622,000 speakers), Makaa (Latn, 221,000 speakers), Bafut (Latn, 158,146 speakers), Mundani (Latn, 34,000 speakers), Basaa (Latn, 332,940 speakers), Dan (Latn, 1,099,244 speakers), Kom (Latn, 360,685 speakers), Ebira (Latn, 2,200,000 speakers), Igbo (Latn, 27,823,640 speakers), Ekpeye (Latn, 226,000 speakers), Vute (Latn, 21,000 speakers), Nzakara (Latn, 50,000 speakers), Aghem (Latn, 38,843 speakers), Gulay (Latn, 250,478 speakers), Ma’di (Latn, 584,000 speakers), Zapotec (Latn, 490,000 speakers), Navajo (Latn, 166,319 speakers), Dii (Latn, 71,000 speakers), Nateni (Latn, 100,000 speakers), Ngbaka (Latn, 1,020,000 speakers), Mfumte (Latn, 79,000 speakers), Ejagham (Latn, 120,000 speakers), Mango (Latn, 77,000 speakers), Ijo, Southeast (Latn, 2,471,000 speakers), Yala (Latn, 200,000 speakers), Dutch (Latn, 31,709,104 speakers), Lugbara (Latn, 2,200,000 speakers), Koonzime (Latn, 40,000 speakers), Sar (Latn, 500,000 speakers), Southern Kisi (Latn, 360,000 speakers), Avokaya (Latn, 100,000 speakers), Fur (Latn, 1,230,163 speakers), Ukrainian (Cyrl, 29,273,587 speakers), Bete-Bendi (Latn, 100,000 speakers), Cicipu (Latn, 44,000 speakers), South Central Banda (Latn, 244,000 speakers).
[code: soft-dotted]The following codepoints supported by the font are not covered by any subsets defined in the font's metadata file, and will never be served. You can solve this by either manually adding additional subset declarations to METADATA.pb, or by editing the glyphset definitions.
Use -F or --full-lists to disable shortening of long lists.
Or you can add the above codepoints to one of the subsets supported by the font: cyrillic
, latin
, latin-ext
, menu
, vietnamese
Name ID 6 'AlumniSansCollegiateOneSC-Italic' exceeds 27 characters. This has been found to cause problems with PostScript printers, especially on Mac platforms.
[code: nameid6-too-long]GPOS table lacks kerning info for the following non-ligated sequences:
- f + f
- f + i
- f + l
[code: lacks-kern-info]
This font lacks caret position values for ligature glyphs on its GDEF table.
[code: lacks-caret-pos]This font file does not have a 'meta' table.
[code: lacks-meta-table]ofl/alumnisanscollegiateone
[code: family-path] * ℹ️ **INFO**ofl/alumnisanscollegiateonesc
[code: family-path]This font contains the following optional tables:
- loca
- prep
- GPOS
- GSUB
- gasp
[code: optional-tables]
Found a git repo URL: https://github.com/googlefonts/alumni-sans-collegiate
[code: url-found]This font doesn't have an ARTICLE.en_us.html file.
[code: missing-article]EPAR table not present in font. To learn more see https://github.com/fonttools/fontbakery/issues/818
[code: lacks-EPAR]These are the ppm ranges declared on the gasp table:
PPM <= 65535: flag = 0x0F - Use grid-fitting - Use grayscale rendering - Use gridfitting with ClearType symmetric smoothing - Use smoothing along multiple axes with ClearType®
[code: ranges]Hinting filesize impact:
ofl/alumnisanscollegiateonesc/AlumniSansCollegiateOneSC-Italic.ttf | |
---|---|
Dehinted Size | 153.5kb |
Hinted Size | 153.5kb |
Increase | 24 bytes |
Change | 0.0 % |
Could not detect which version of ttfautohint was used in this font. It is typically specified as a comment in the font version entries of the 'name' table. Such font version strings are currently: ['Version 1.100']
[code: version-not-detected]💥 ERROR | ☠ FATAL | 🔥 FAIL | ⚠️ WARN | ⏩ SKIP | ℹ️ INFO | ✅ PASS | 🔎 DEBUG |
---|---|---|---|---|---|---|---|
0 | 0 | 2 | 28 | 120 | 19 | 315 | 0 |
0% | 0% | 0% | 6% | 25% | 4% | 65% | 0% |
Note: The following loglevels were omitted in this report:
Note: The SC fonts are automatically created from the non-SC fonts, so they do not cover update fixes. They should probably be done "upstream" later on.
fontbakery version: 0.12.6
These won't break the CI job for now, but will become effective after some time if nobody raises any concern.
GF_Latin_Core glyphset:
Language | FAIL messages |
---|---|
nl_Latn (Dutch) | Shaper didn't attach acutecomb to j.sc |
GF_Cyrillic_Core glyphset:
Language | FAIL messages |
---|---|
uk_Cyrl (Ukrainian) | Some base glyphs were missing: ґ |
^ | Shaper produced a .notdef |
GF_Cyrillic_Core glyphset:
Language | WARN messages |
---|---|
uk_Cyrl (Ukrainian) | Some auxiliary glyphs were missing: ґ |
This check inspects the glyph outlines and detects the total number of contours in each of them. The expected values are infered from the typical ammounts of contours observed in a large collection of reference font families. The divergences listed below may simply indicate a significantly different design on some of your glyphs. On the other hand, some of these may flag actual bugs in the font such as glyphs mapped to an incorrect codepoint. Please consider reviewing the design and codepoint assignment of these to make sure they are correct.
The following glyphs do not have the recommended number of contours:
- Glyph name: exclam Contours detected: 5 Expected: 2
- Glyph name: quotedbl Contours detected: 5 Expected: 2
- Glyph name: numbersign Contours detected: 6 Expected: 2
- Glyph name: percent Contours detected: 9 Expected: 4 or 5
- Glyph name: ampersand Contours detected: 6 Expected: 1, 2 or 3
- Glyph name: quotesingle Contours detected: 3 Expected: 1
- Glyph name: parenleft Contours detected: 3 Expected: 1
- Glyph name: parenright Contours detected: 3 Expected: 1
- Glyph name: asterisk Contours detected: 3 Expected: 1 or 4
- Glyph name: plus Contours detected: 3 Expected: 1
- 1290 more.
Use -F or --full-lists to disable shortening of long lists.
[code: contour-count]The most common width is 269 among a set of 4 math glyphs. The following math glyphs have a different width, though:
Width = 412: plus
Width = 359: equal
Width = 500: logicalnot
Width = 398: plusminus
Width = 394: multiply
Width = 351: divide
Width = 456: minus
Width = 593: approxequal
Width = 424: notequal
[code: width-outliers]This font has a 'Soft Hyphen' character.
[code: softhyphen]The following glyphs could not be reached by codepoint or substitution rules:
- Euro.oldstyle
- ampersand.001
- ampersand.002
- arrow_bottom_left
- arrow_bottom_right
- arrow_down
- arrow_left
- arrow_right
- arrow_top_left
- arrow_top_right
- 13 more.
Use -F or --full-lists to disable shortening of long lists.
[code: unreachable-glyphs]The following glyphs have jaggy segments:
* A (U+0041): L<<197.0,184.0>--<204.0,291.0>>/L<<204.0,291.0>--<211.0,184.0>> = 7.485976591374219
* A (U+0041): L<<219.0,175.0>--<204.0,450.0>>/L<<204.0,450.0>--<188.0,175.0>> = 6.451949190967401
* A.ss01: L<<218.0,158.0>--<223.0,256.0>>/L<<223.0,256.0>--<227.0,158.0>> = 5.258027380124218
* A.ss01: L<<236.0,149.0>--<223.0,376.0>>/L<<223.0,376.0>--<210.0,149.0>> = 6.555351904380469
* AE (U+00C6): L<<201.0,184.0>--<208.0,302.0>>/L<<208.0,302.0>--<215.0,184.0>> = 6.789847084236596
* AE (U+00C6): L<<209.0,428.0>--<208.0,450.0>>/L<<208.0,450.0>--<206.0,428.0>> = 7.796991110234607
* AE.ss01: L<<180.0,158.0>--<184.0,230.0>>/L<<184.0,230.0>--<189.0,158.0>> = 7.152326060614876
* AE.ss01: L<<185.0,357.0>--<184.0,376.0>>/L<<184.0,376.0>--<183.0,357.0>> = 6.025575008366673
* AEacute (U+01FC): L<<201.0,184.0>--<208.0,302.0>>/L<<208.0,302.0>--<215.0,184.0>> = 6.789847084236596
* AEacute (U+01FC): L<<209.0,428.0>--<208.0,450.0>>/L<<208.0,450.0>--<206.0,428.0>> = 7.796991110234607
* 374 more.
Use -F or --full-lists to disable shortening of long lists.
[code: found-jaggy-segments]The following glyphs have semi-vertical/semi-horizontal lines:
* arrow_down: L<<226.0,39.0>--<225.0,504.0>>
* arrow_down: L<<350.0,504.0>--<352.0,38.0>>
* arrow_left: L<<271.0,322.0>--<736.0,325.0>>
* arrow_left: L<<736.0,199.0>--<269.0,197.0>>
* arrow_right: L<<31.0,325.0>--<496.0,322.0>>
* arrow_right: L<<497.0,197.0>--<31.0,199.0>>
* arrow_up: L<<225.0,-201.0>--<226.0,264.0>>
* arrow_up: L<<352.0,266.0>--<350.0,-201.0>>
* estimated (U+212E): L<<182.0,247.0>--<183.0,96.0>>
* estimated (U+212E): L<<183.0,376.0>--<182.0,259.0>>
* 9 more.
Use -F or --full-lists to disable shortening of long lists.
[code: found-semi-vertical]No dotted circle glyph present
[code: missing-dotted-circle]The dot of soft dotted characters used in orthographies must disappear in the following strings: į̀ į́ į̂ į̃ į̄ į̌ і́ ị̀ ị́ ị̂ ị̃ ị̄
The dot of soft dotted characters should disappear in other cases, for example: į̆ į̇ į̈ į̉ į̊ į̋ į̏ į̑ į̒ į̛̏ į̛̑ į̛̒ į̣̀ į̣́ į̣̂ į̣̃ į̣̄ į̣̆ į̣̇ į̣̈
Your font fully covers the following languages that require the soft-dotted feature: Belarusian (Cyrl, 10,064,517 speakers), Lithuanian (Latn, 2,357,094 speakers).
Your font does not cover the following languages that require the soft-dotted feature: South Central Banda (Latn, 244,000 speakers), Fur (Latn, 1,230,163 speakers), Lugbara (Latn, 2,200,000 speakers), Southern Kisi (Latn, 360,000 speakers), Mfumte (Latn, 79,000 speakers), Ejagham (Latn, 120,000 speakers), Ebira (Latn, 2,200,000 speakers), Vute (Latn, 21,000 speakers), Sar (Latn, 500,000 speakers), Makaa (Latn, 221,000 speakers), Bete-Bendi (Latn, 100,000 speakers), Dutch (Latn, 31,709,104 speakers), Gulay (Latn, 250,478 speakers), Kpelle, Guinea (Latn, 622,000 speakers), Ngbaka (Latn, 1,020,000 speakers), Dii (Latn, 71,000 speakers), Aghem (Latn, 38,843 speakers), Dan (Latn, 1,099,244 speakers), Zapotec (Latn, 490,000 speakers), Bafut (Latn, 158,146 speakers), Mundani (Latn, 34,000 speakers), Basaa (Latn, 332,940 speakers), Ekpeye (Latn, 226,000 speakers), Igbo (Latn, 27,823,640 speakers), Nateni (Latn, 100,000 speakers), Koonzime (Latn, 40,000 speakers), Mango (Latn, 77,000 speakers), Yala (Latn, 200,000 speakers), Ma’di (Latn, 584,000 speakers), Navajo (Latn, 166,319 speakers), Kom (Latn, 360,685 speakers), Ukrainian (Cyrl, 29,273,587 speakers), Cicipu (Latn, 44,000 speakers), Avokaya (Latn, 100,000 speakers), Nzakara (Latn, 50,000 speakers), Ijo, Southeast (Latn, 2,471,000 speakers).
[code: soft-dotted]The following codepoints supported by the font are not covered by any subsets defined in the font's metadata file, and will never be served. You can solve this by either manually adding additional subset declarations to METADATA.pb, or by editing the glyphset definitions.
Use -F or --full-lists to disable shortening of long lists.
Or you can add the above codepoints to one of the subsets supported by the font: cyrillic
, latin
, latin-ext
, menu
, vietnamese
Name ID 6 'AlumniSansCollegiateOneSC-Regular' exceeds 27 characters. This has been found to cause problems with PostScript printers, especially on Mac platforms.
[code: nameid6-too-long]GPOS table lacks kerning info for the following non-ligated sequences:
- f + f
- f + i
- f + l
[code: lacks-kern-info]
This font lacks caret position values for ligature glyphs on its GDEF table.
[code: lacks-caret-pos]This font file does not have a 'meta' table.
[code: lacks-meta-table]The stylistic set ss01 lacks a description string on the 'name' table.
[code: missing-description]ofl/alumnisanscollegiateone
[code: family-path] * ℹ️ **INFO**ofl/alumnisanscollegiateonesc
[code: family-path]This font contains the following optional tables:
- loca
- prep
- GPOS
- GSUB
- gasp
[code: optional-tables]
Found a git repo URL: https://github.com/googlefonts/alumni-sans-collegiate
[code: url-found]This font doesn't have an ARTICLE.en_us.html file.
[code: missing-article]EPAR table not present in font. To learn more see https://github.com/fonttools/fontbakery/issues/818
[code: lacks-EPAR]These are the ppm ranges declared on the gasp table:
PPM <= 65535: flag = 0x0F - Use grid-fitting - Use grayscale rendering - Use gridfitting with ClearType symmetric smoothing - Use smoothing along multiple axes with ClearType®
[code: ranges]Hinting filesize impact:
ofl/alumnisanscollegiateonesc/AlumniSansCollegiateOneSC-Regular.ttf | |
---|---|
Dehinted Size | 142.5kb |
Hinted Size | 142.5kb |
Increase | 24 bytes |
Change | 0.0 % |
Could not detect which version of ttfautohint was used in this font. It is typically specified as a comment in the font version entries of the 'name' table. Such font version strings are currently: ['Version 1.100']
[code: version-not-detected]GF_Latin_Core glyphset:
Language | FAIL messages |
---|---|
nl_Latn (Dutch) | Shaper didn't attach acutecomb.case to J |
^ | Shaper didn't attach acutecomb to j.sc |
GF_Cyrillic_Core glyphset:
Language | FAIL messages |
---|---|
uk_Cyrl (Ukrainian) | Some base glyphs were missing: ґ |
^ | Shaper produced a .notdef |
GF_Cyrillic_Core glyphset:
Language | WARN messages |
---|---|
uk_Cyrl (Ukrainian) | Some auxiliary glyphs were missing: ґ |
This check inspects the glyph outlines and detects the total number of contours in each of them. The expected values are infered from the typical ammounts of contours observed in a large collection of reference font families. The divergences listed below may simply indicate a significantly different design on some of your glyphs. On the other hand, some of these may flag actual bugs in the font such as glyphs mapped to an incorrect codepoint. Please consider reviewing the design and codepoint assignment of these to make sure they are correct.
The following glyphs do not have the recommended number of contours:
- Glyph name: exclam Contours detected: 5 Expected: 2
- Glyph name: quotedbl Contours detected: 5 Expected: 2
- Glyph name: numbersign Contours detected: 6 Expected: 2
- Glyph name: percent Contours detected: 9 Expected: 4 or 5
- Glyph name: ampersand Contours detected: 6 Expected: 1, 2 or 3
- Glyph name: quotesingle Contours detected: 3 Expected: 1
- Glyph name: parenleft Contours detected: 3 Expected: 1
- Glyph name: parenright Contours detected: 3 Expected: 1
- Glyph name: asterisk Contours detected: 3 Expected: 1 or 4
- Glyph name: plus Contours detected: 3 Expected: 1
- 1292 more.
Use -F or --full-lists to disable shortening of long lists.
[code: contour-count]The most common width is 348 among a set of 2 math glyphs. The following math glyphs have a different width, though:
Width = 412: plus
Width = 347: less
Width = 360: equal
Width = 269: greater
Width = 501: logicalnot
Width = 478: plusminus
Width = 393: multiply
Width = 352: divide
Width = 457: minus
Width = 595: approxequal
Width = 424: notequal
[code: width-outliers]This font has a 'Soft Hyphen' character.
[code: softhyphen]The following glyphs could not be reached by codepoint or substitution rules:
- Euro.oldstyle
- ampersand.001
- ampersand.002
- arrow_bottom_left
- arrow_bottom_right
- arrow_down
- arrow_left
- arrow_right
- arrow_top_left
- arrow_top_right
- 12 more.
Use -F or --full-lists to disable shortening of long lists.
[code: unreachable-glyphs]The following glyphs have jaggy segments:
* A (U+0041): L<<185.0,184.0>--<207.0,291.0>>/B<<207.0,291.0>-<206.0,276.0>-<204.5,256.0>> = 7.8044495185042875
* A (U+0041): L<<206.0,175.0>--<230.0,450.0>>/L<<230.0,450.0>--<175.0,175.0>> = 6.322210958954923
* A.ss01: L<<205.0,158.0>--<224.0,256.0>>/L<<224.0,256.0>--<214.0,158.0>> = 5.145898208255821
* A.ss01: L<<222.0,149.0>--<241.0,376.0>>/L<<241.0,376.0>--<196.0,149.0>> = 6.42829138814691
* AE (U+00C6): L<<191.0,184.0>--<215.0,302.0>>/L<<215.0,302.0>--<205.0,184.0>> = 6.652562642505048
* AE (U+00C6): L<<234.0,428.0>--<236.0,450.0>>/L<<236.0,450.0>--<231.0,428.0>> = 7.609837157551915
* AE.ss01: L<<162.0,158.0>--<176.0,230.0>>/L<<176.0,230.0>--<171.0,158.0>> = 7.031044910998857
* AE.ss01: L<<195.0,357.0>--<197.0,376.0>>/L<<197.0,376.0>--<193.0,357.0>> = 5.879652082133342
* AEacute (U+01FC): L<<191.0,184.0>--<215.0,302.0>>/L<<215.0,302.0>--<205.0,184.0>> = 6.652562642505048
* AEacute (U+01FC): L<<234.0,428.0>--<236.0,450.0>>/L<<236.0,450.0>--<231.0,428.0>> = 7.609837157551915
* 353 more.
Use -F or --full-lists to disable shortening of long lists.
[code: found-jaggy-segments]No dotted circle glyph present
[code: missing-dotted-circle]The dot of soft dotted characters used in orthographies must disappear in the following strings: į̀ į́ į̂ į̃ į̄ į̌ і́ ị̀ ị́ ị̂ ị̃ ị̄
The dot of soft dotted characters should disappear in other cases, for example: į̆ į̇ į̈ į̉ į̊ į̋ į̏ į̑ į̒ į̛̏ į̛̑ į̛̒ į̣̀ į̣́ į̣̂ į̣̃ į̣̄ į̣̆ į̣̇ į̣̈
Your font fully covers the following languages that require the soft-dotted feature: Belarusian (Cyrl, 10,064,517 speakers), Lithuanian (Latn, 2,357,094 speakers).
Your font does not cover the following languages that require the soft-dotted feature: South Central Banda (Latn, 244,000 speakers), Fur (Latn, 1,230,163 speakers), Lugbara (Latn, 2,200,000 speakers), Southern Kisi (Latn, 360,000 speakers), Mfumte (Latn, 79,000 speakers), Ejagham (Latn, 120,000 speakers), Ebira (Latn, 2,200,000 speakers), Vute (Latn, 21,000 speakers), Sar (Latn, 500,000 speakers), Makaa (Latn, 221,000 speakers), Bete-Bendi (Latn, 100,000 speakers), Dutch (Latn, 31,709,104 speakers), Gulay (Latn, 250,478 speakers), Kpelle, Guinea (Latn, 622,000 speakers), Ngbaka (Latn, 1,020,000 speakers), Dii (Latn, 71,000 speakers), Aghem (Latn, 38,843 speakers), Dan (Latn, 1,099,244 speakers), Zapotec (Latn, 490,000 speakers), Bafut (Latn, 158,146 speakers), Mundani (Latn, 34,000 speakers), Basaa (Latn, 332,940 speakers), Ekpeye (Latn, 226,000 speakers), Igbo (Latn, 27,823,640 speakers), Nateni (Latn, 100,000 speakers), Koonzime (Latn, 40,000 speakers), Mango (Latn, 77,000 speakers), Yala (Latn, 200,000 speakers), Ma’di (Latn, 584,000 speakers), Navajo (Latn, 166,319 speakers), Kom (Latn, 360,685 speakers), Ukrainian (Cyrl, 29,273,587 speakers), Cicipu (Latn, 44,000 speakers), Avokaya (Latn, 100,000 speakers), Nzakara (Latn, 50,000 speakers), Ijo, Southeast (Latn, 2,471,000 speakers).
[code: soft-dotted]The following codepoints supported by the font are not covered by any subsets defined in the font's metadata file, and will never be served. You can solve this by either manually adding additional subset declarations to METADATA.pb, or by editing the glyphset definitions.
Use -F or --full-lists to disable shortening of long lists.
Or you can add the above codepoints to one of the subsets supported by the font: cyrillic
, latin
, latin-ext
, menu
, vietnamese
Name ID 6 'AlumniSansCollegiateOneSC-Italic' exceeds 27 characters. This has been found to cause problems with PostScript printers, especially on Mac platforms.
[code: nameid6-too-long]GPOS table lacks kerning info for the following non-ligated sequences:
- f + f
- f + i
- f + l
[code: lacks-kern-info]
This font lacks caret position values for ligature glyphs on its GDEF table.
[code: lacks-caret-pos]This font file does not have a 'meta' table.
[code: lacks-meta-table]ofl/alumnisanscollegiateone
[code: family-path] * ℹ️ **INFO**ofl/alumnisanscollegiateonesc
[code: family-path]This font contains the following optional tables:
- loca
- prep
- GPOS
- GSUB
- gasp
[code: optional-tables]
Found a git repo URL: https://github.com/googlefonts/alumni-sans-collegiate
[code: url-found]This font doesn't have an ARTICLE.en_us.html file.
[code: missing-article]EPAR table not present in font. To learn more see https://github.com/fonttools/fontbakery/issues/818
[code: lacks-EPAR]These are the ppm ranges declared on the gasp table:
PPM <= 65535: flag = 0x0F - Use grid-fitting - Use grayscale rendering - Use gridfitting with ClearType symmetric smoothing - Use smoothing along multiple axes with ClearType®
[code: ranges]Hinting filesize impact:
ofl/alumnisanscollegiateonesc/AlumniSansCollegiateOneSC-Italic.ttf | |
---|---|
Dehinted Size | 153.5kb |
Hinted Size | 153.5kb |
Increase | 24 bytes |
Change | 0.0 % |
Could not detect which version of ttfautohint was used in this font. It is typically specified as a comment in the font version entries of the 'name' table. Such font version strings are currently: ['Version 1.100']
[code: version-not-detected]💥 ERROR | ☠ FATAL | 🔥 FAIL | ⚠️ WARN | ⏩ SKIP | ℹ️ INFO | ✅ PASS | 🔎 DEBUG |
---|---|---|---|---|---|---|---|
0 | 0 | 2 | 28 | 120 | 19 | 315 | 0 |
0% | 0% | 0% | 6% | 25% | 4% | 65% | 0% |
Note: The following loglevels were omitted in this report:
@simoncozens I added the SC reference to the Description file. After that, LGTM. However, the CI run is not working now. I'll wait until we hear from Marc on that.
The PR must be rebased for the CI to work with the latest changes. However, I got the QA files from yesterday, and they were okay, so I'm merging this now.
@simoncozens Looks like the font is missing the space
Huh, the problem with this font is that it has a "space.sc"! It's a bug with the parent font too:
Arf! It isn't needed. Could you remove it?
Taken from the upstream repo https://github.com/googlefonts/alumni-sans-collegiate at commit https://github.com/googlefonts/alumni-sans-collegiate/commit/9dc96be1ead732fb1677c88632665e0bbf2e4ee2.
PR Checklist: