Closed simoncozens closed 1 week ago
fontbakery version: 0.12.6
These won't break the CI job for now, but will become effective after some time if nobody raises any concern.
The following glyphs lack their case-swapping counterparts:
Glyph present in the font | Missing case-swapping counterpart |
---|---|
U+01DD: LATIN SMALL LETTER TURNED E | U+018E: LATIN CAPITAL LETTER REVERSED E |
Name ID 4 'Big Shoulders Inline Display Thin' exceeds 32 characters. This has been found to cause problems with the dropdown menu in old versions of Microsoft Word as well as shaping issues for some accented letters in Microsoft Word on Windows 10 and 11.
[code: nameid4-too-long] * 🔥 **FAIL**Variable font instance name 'Big Shoulders Inline Display Thin Thin' formed by space-separated concatenation of font family name (nameID 1) and instance subfamily nameID 258 exceeds 32 characters.
This has been found to cause shaping issues for some accented letters in Microsoft Word on Windows 10 and 11.
[code: instance-too-long] * 🔥 **FAIL**Variable font instance name 'Big Shoulders Inline Display Thin Thin' formed by space-separated concatenation of font family name (nameID 1) and instance subfamily nameID 258 exceeds 32 characters.
This has been found to cause shaping issues for some accented letters in Microsoft Word on Windows 10 and 11.
[code: instance-too-long] * 🔥 **FAIL**Variable font instance name 'Big Shoulders Inline Display Thin ExtraLight' formed by space-separated concatenation of font family name (nameID 1) and instance subfamily nameID 259 exceeds 32 characters.
This has been found to cause shaping issues for some accented letters in Microsoft Word on Windows 10 and 11.
[code: instance-too-long] * 🔥 **FAIL**Variable font instance name 'Big Shoulders Inline Display Thin ExtraLight' formed by space-separated concatenation of font family name (nameID 1) and instance subfamily nameID 259 exceeds 32 characters.
This has been found to cause shaping issues for some accented letters in Microsoft Word on Windows 10 and 11.
[code: instance-too-long] * 🔥 **FAIL**Variable font instance name 'Big Shoulders Inline Display Thin Light' formed by space-separated concatenation of font family name (nameID 1) and instance subfamily nameID 260 exceeds 32 characters.
This has been found to cause shaping issues for some accented letters in Microsoft Word on Windows 10 and 11.
[code: instance-too-long] * 🔥 **FAIL**Variable font instance name 'Big Shoulders Inline Display Thin Light' formed by space-separated concatenation of font family name (nameID 1) and instance subfamily nameID 260 exceeds 32 characters.
This has been found to cause shaping issues for some accented letters in Microsoft Word on Windows 10 and 11.
[code: instance-too-long] * 🔥 **FAIL**Variable font instance name 'Big Shoulders Inline Display Thin Regular' formed by space-separated concatenation of font family name (nameID 1) and instance subfamily nameID 261 exceeds 32 characters.
This has been found to cause shaping issues for some accented letters in Microsoft Word on Windows 10 and 11.
[code: instance-too-long] * 🔥 **FAIL**Variable font instance name 'Big Shoulders Inline Display Thin Regular' formed by space-separated concatenation of font family name (nameID 1) and instance subfamily nameID 261 exceeds 32 characters.
This has been found to cause shaping issues for some accented letters in Microsoft Word on Windows 10 and 11.
[code: instance-too-long] * 🔥 **FAIL**Variable font instance name 'Big Shoulders Inline Display Thin Medium' formed by space-separated concatenation of font family name (nameID 1) and instance subfamily nameID 262 exceeds 32 characters.
This has been found to cause shaping issues for some accented letters in Microsoft Word on Windows 10 and 11.
[code: instance-too-long] * 🔥 **FAIL**Variable font instance name 'Big Shoulders Inline Display Thin Medium' formed by space-separated concatenation of font family name (nameID 1) and instance subfamily nameID 262 exceeds 32 characters.
This has been found to cause shaping issues for some accented letters in Microsoft Word on Windows 10 and 11.
[code: instance-too-long] * 🔥 **FAIL**Variable font instance name 'Big Shoulders Inline Display Thin SemiBold' formed by space-separated concatenation of font family name (nameID 1) and instance subfamily nameID 263 exceeds 32 characters.
This has been found to cause shaping issues for some accented letters in Microsoft Word on Windows 10 and 11.
[code: instance-too-long] * 🔥 **FAIL**Variable font instance name 'Big Shoulders Inline Display Thin SemiBold' formed by space-separated concatenation of font family name (nameID 1) and instance subfamily nameID 263 exceeds 32 characters.
This has been found to cause shaping issues for some accented letters in Microsoft Word on Windows 10 and 11.
[code: instance-too-long] * 🔥 **FAIL**Variable font instance name 'Big Shoulders Inline Display Thin Bold' formed by space-separated concatenation of font family name (nameID 1) and instance subfamily nameID 264 exceeds 32 characters.
This has been found to cause shaping issues for some accented letters in Microsoft Word on Windows 10 and 11.
[code: instance-too-long] * 🔥 **FAIL**Variable font instance name 'Big Shoulders Inline Display Thin Bold' formed by space-separated concatenation of font family name (nameID 1) and instance subfamily nameID 264 exceeds 32 characters.
This has been found to cause shaping issues for some accented letters in Microsoft Word on Windows 10 and 11.
[code: instance-too-long] * 🔥 **FAIL**Variable font instance name 'Big Shoulders Inline Display Thin ExtraBold' formed by space-separated concatenation of font family name (nameID 1) and instance subfamily nameID 265 exceeds 32 characters.
This has been found to cause shaping issues for some accented letters in Microsoft Word on Windows 10 and 11.
[code: instance-too-long] * 🔥 **FAIL**Variable font instance name 'Big Shoulders Inline Display Thin ExtraBold' formed by space-separated concatenation of font family name (nameID 1) and instance subfamily nameID 265 exceeds 32 characters.
This has been found to cause shaping issues for some accented letters in Microsoft Word on Windows 10 and 11.
[code: instance-too-long] * 🔥 **FAIL**Variable font instance name 'Big Shoulders Inline Display Thin Black' formed by space-separated concatenation of font family name (nameID 1) and instance subfamily nameID 266 exceeds 32 characters.
This has been found to cause shaping issues for some accented letters in Microsoft Word on Windows 10 and 11.
[code: instance-too-long] * 🔥 **FAIL**Variable font instance name 'Big Shoulders Inline Display Thin Black' formed by space-separated concatenation of font family name (nameID 1) and instance subfamily nameID 266 exceeds 32 characters.
This has been found to cause shaping issues for some accented letters in Microsoft Word on Windows 10 and 11.
[code: instance-too-long] * ⚠️ **WARN**Name ID 6 'BigShouldersInlineDisplay-Thin' exceeds 27 characters. This has been found to cause problems with PostScript printers, especially on Mac platforms.
[code: nameid6-too-long]In order to optimize performance on some legacy renderers, the value of unitsPerEm at the head table should ideally be a power of 2 between 16 to 16384. And values of 1000 and 2000 are also common and may be just fine as well. But we got 4000 instead.
[code: suboptimal]This font has a digital signature (DSIG table) which is only required - even if only a placeholder - on old programs like MS Office 2013 in order to work properly. The current recommendation is to completely remove the DSIG table.
[code: found-DSIG]Interpolation issues were found in the font:
- Contour 3 point 20 in glyph 'g' has a kink between location wght=300 and location wght=900
- Contour 0 start point differs in glyph 'greaterequal' between location wght=100 and location wght=300
- Contour 1 start point differs in glyph 'greaterequal' between location wght=100 and location wght=300
- Contour 2 start point differs in glyph 'greaterequal' between location wght=100 and location wght=300
[code: interpolation-issues]
The most common width is 1464 among a set of 5 math glyphs. The following math glyphs have a different width, though:
Width = 1544: plus, plusminus
Width = 1776: less
Width = 1536: greater, lessequal
Width = 1289: multiply
Width = 1436: approxequal
Width = 1532: greaterequal
[code: width-outliers]This font has a 'Soft Hyphen' character.
[code: softhyphen]The following glyphs could not be reached by codepoint or substitution rules:
- eight.subs
- five.subs
- four.subs
- nine.subs
- one.subs
- seven.subs
- six.subs
- three.subs
- two.subs
- zero.subs
[code: unreachable-glyphs]
The following glyphs have a counter-clockwise outer contour:
* a.ss01 has a counter-clockwise outer contour
* aacute.ss01 has a counter-clockwise outer contour
* abreve.ss01 has a counter-clockwise outer contour
* acircumflex.ss01 has a counter-clockwise outer contour
* adieresis.ss01 has a counter-clockwise outer contour
* agrave.ss01 has a counter-clockwise outer contour
* amacron.ss01 has a counter-clockwise outer contour
* aogonek.ss01 has a counter-clockwise outer contour
* aring.ss01 has a counter-clockwise outer contour
* atilde.ss01 has a counter-clockwise outer contour
* 14 more.
Use -F or --full-lists to disable shortening of long lists.
[code: ccw-outer-contour]No dotted circle glyph present
[code: missing-dotted-circle]The dot of soft dotted characters used in orthographies must disappear in the following strings: į̀ į́ į̂ į̃ į̄ į̌ ị̀ ị́ ị̂ ị̃ ị̄
The dot of soft dotted characters should disappear in other cases, for example: i̦̇ i̦̊ i̦̋ i̦̒ j̦̀ j̦́ j̦̃ j̦̄ j̦̆ j̦̇ j̦̈ j̦̉ j̦̊ j̦̋ ǰ̦ j̦̏ j̦̑ j̦̒ į̆ į̇
Your font fully covers the following languages that require the soft-dotted feature: Lithuanian (Latn, 2,357,094 speakers), Ebira (Latn, 2,200,000 speakers), Navajo (Latn, 166,319 speakers), Dutch (Latn, 31,709,104 speakers), Ma’di (Latn, 584,000 speakers).
Your font does not cover the following languages that require the soft-dotted feature: Ijo, Southeast (Latn, 2,471,000 speakers), Ngbaka (Latn, 1,020,000 speakers), Igbo (Latn, 27,823,640 speakers), Aghem (Latn, 38,843 speakers), Zapotec (Latn, 490,000 speakers), Cicipu (Latn, 44,000 speakers), Bete-Bendi (Latn, 100,000 speakers), South Central Banda (Latn, 244,000 speakers), Mango (Latn, 77,000 speakers), Kpelle, Guinea (Latn, 622,000 speakers), Vute (Latn, 21,000 speakers), Belarusian (Cyrl, 10,064,517 speakers), Dii (Latn, 71,000 speakers), Dan (Latn, 1,099,244 speakers), Ejagham (Latn, 120,000 speakers), Makaa (Latn, 221,000 speakers), Nzakara (Latn, 50,000 speakers), Basaa (Latn, 332,940 speakers), Avokaya (Latn, 100,000 speakers), Gulay (Latn, 250,478 speakers), Lugbara (Latn, 2,200,000 speakers), Fur (Latn, 1,230,163 speakers), Sar (Latn, 500,000 speakers), Southern Kisi (Latn, 360,000 speakers), Koonzime (Latn, 40,000 speakers), Ukrainian (Cyrl, 29,273,587 speakers), Mundani (Latn, 34,000 speakers), Kom (Latn, 360,685 speakers), Nateni (Latn, 100,000 speakers), Bafut (Latn, 158,146 speakers), Mfumte (Latn, 79,000 speakers), Yala (Latn, 200,000 speakers), Ekpeye (Latn, 226,000 speakers).
[code: soft-dotted]The following codepoints supported by the font are not covered by any subsets defined in the font's metadata file, and will never be served. You can solve this by either manually adding additional subset declarations to METADATA.pb, or by editing the glyphset definitions.
Use -F or --full-lists to disable shortening of long lists.
Or you can add the above codepoints to one of the subsets supported by the font: latin
, latin-ext
, menu
, vietnamese
Please consider updating the url from 'https://scripts.sil.org/OFL' to 'https://openfontlicense.org'.
[code: old-url]GPOS table lacks kerning info for the following non-ligated sequences:
- f + f
- f + i
- f + l
[code: lacks-kern-info]
This font file does not have a 'meta' table.
[code: lacks-meta-table]The stylistic set ss01 lacks a description string on the 'name' table.
[code: missing-description]Font does not follow some family naming recommendations:
Field | Value | Recommendation |
---|---|---|
Family Name | Big Shoulders Inline Display Thin | exceeds max length (31) |
ofl/bigshouldersinlinedisplay
[code: family-path] * ℹ️ **INFO**ofl/bigshouldersinlinedisplaysc
[code: family-path]This font contains the following optional tables:
- loca
- prep
- GPOS
- GSUB
- gasp
[code: optional-tables]
Found a git repo URL: https://github.com/xotypeco/big_shoulders
[code: url-found]This font doesn't have an ARTICLE.en_us.html file.
[code: missing-article]EPAR table not present in font. To learn more see https://github.com/fonttools/fontbakery/issues/818
[code: lacks-EPAR]These are the ppm ranges declared on the gasp table:
PPM <= 65535: flag = 0x0F - Use grid-fitting - Use grayscale rendering - Use gridfitting with ClearType symmetric smoothing - Use smoothing along multiple axes with ClearType®
[code: ranges]Hinting filesize impact:
ofl/bigshouldersinlinedisplay/BigShouldersInlineDisplay[wght].ttf | |
---|---|
Dehinted Size | 410.2kb |
Hinted Size | 410.2kb |
Increase | 24 bytes |
Change | 0.0 % |
Could not detect which version of ttfautohint was used in this font. It is typically specified as a comment in the font version entries of the 'name' table. Such font version strings are currently: ['Version 2.002']
[code: version-not-detected]💥 ERROR | ☠ FATAL | 🔥 FAIL | ⚠️ WARN | ⏩ SKIP | ℹ️ INFO | ✅ PASS | 🔎 DEBUG |
---|---|---|---|---|---|---|---|
0 | 0 | 2 | 15 | 40 | 11 | 183 | 0 |
0% | 0% | 1% | 6% | 16% | 4% | 73% | 0% |
Note: The following loglevels were omitted in this report:
fontbakery version: 0.12.6
These won't break the CI job for now, but will become effective after some time if nobody raises any concern.
The following glyphs lack their case-swapping counterparts:
Glyph present in the font | Missing case-swapping counterpart |
---|---|
U+01DD: LATIN SMALL LETTER TURNED E | U+018E: LATIN CAPITAL LETTER REVERSED E |
Name ID 4 'Big Shoulders Inline Display SC Thin' exceeds 32 characters. This has been found to cause problems with the dropdown menu in old versions of Microsoft Word as well as shaping issues for some accented letters in Microsoft Word on Windows 10 and 11.
[code: nameid4-too-long] * 🔥 **FAIL**Variable font instance name 'Big Shoulders Inline Display SC Thin Thin' formed by space-separated concatenation of font family name (nameID 1) and instance subfamily nameID 258 exceeds 32 characters.
This has been found to cause shaping issues for some accented letters in Microsoft Word on Windows 10 and 11.
[code: instance-too-long] * 🔥 **FAIL**Variable font instance name 'Big Shoulders Inline Display SC Thin Thin' formed by space-separated concatenation of font family name (nameID 1) and instance subfamily nameID 258 exceeds 32 characters.
This has been found to cause shaping issues for some accented letters in Microsoft Word on Windows 10 and 11.
[code: instance-too-long] * 🔥 **FAIL**Variable font instance name 'Big Shoulders Inline Display SC Thin ExtraLight' formed by space-separated concatenation of font family name (nameID 1) and instance subfamily nameID 259 exceeds 32 characters.
This has been found to cause shaping issues for some accented letters in Microsoft Word on Windows 10 and 11.
[code: instance-too-long] * 🔥 **FAIL**Variable font instance name 'Big Shoulders Inline Display SC Thin ExtraLight' formed by space-separated concatenation of font family name (nameID 1) and instance subfamily nameID 259 exceeds 32 characters.
This has been found to cause shaping issues for some accented letters in Microsoft Word on Windows 10 and 11.
[code: instance-too-long] * 🔥 **FAIL**Variable font instance name 'Big Shoulders Inline Display SC Thin Light' formed by space-separated concatenation of font family name (nameID 1) and instance subfamily nameID 260 exceeds 32 characters.
This has been found to cause shaping issues for some accented letters in Microsoft Word on Windows 10 and 11.
[code: instance-too-long] * 🔥 **FAIL**Variable font instance name 'Big Shoulders Inline Display SC Thin Light' formed by space-separated concatenation of font family name (nameID 1) and instance subfamily nameID 260 exceeds 32 characters.
This has been found to cause shaping issues for some accented letters in Microsoft Word on Windows 10 and 11.
[code: instance-too-long] * 🔥 **FAIL**Variable font instance name 'Big Shoulders Inline Display SC Thin Regular' formed by space-separated concatenation of font family name (nameID 1) and instance subfamily nameID 261 exceeds 32 characters.
This has been found to cause shaping issues for some accented letters in Microsoft Word on Windows 10 and 11.
[code: instance-too-long] * 🔥 **FAIL**Variable font instance name 'Big Shoulders Inline Display SC Thin Regular' formed by space-separated concatenation of font family name (nameID 1) and instance subfamily nameID 261 exceeds 32 characters.
This has been found to cause shaping issues for some accented letters in Microsoft Word on Windows 10 and 11.
[code: instance-too-long] * 🔥 **FAIL**Variable font instance name 'Big Shoulders Inline Display SC Thin Medium' formed by space-separated concatenation of font family name (nameID 1) and instance subfamily nameID 262 exceeds 32 characters.
This has been found to cause shaping issues for some accented letters in Microsoft Word on Windows 10 and 11.
[code: instance-too-long] * 🔥 **FAIL**Variable font instance name 'Big Shoulders Inline Display SC Thin Medium' formed by space-separated concatenation of font family name (nameID 1) and instance subfamily nameID 262 exceeds 32 characters.
This has been found to cause shaping issues for some accented letters in Microsoft Word on Windows 10 and 11.
[code: instance-too-long] * 🔥 **FAIL**Variable font instance name 'Big Shoulders Inline Display SC Thin SemiBold' formed by space-separated concatenation of font family name (nameID 1) and instance subfamily nameID 263 exceeds 32 characters.
This has been found to cause shaping issues for some accented letters in Microsoft Word on Windows 10 and 11.
[code: instance-too-long] * 🔥 **FAIL**Variable font instance name 'Big Shoulders Inline Display SC Thin SemiBold' formed by space-separated concatenation of font family name (nameID 1) and instance subfamily nameID 263 exceeds 32 characters.
This has been found to cause shaping issues for some accented letters in Microsoft Word on Windows 10 and 11.
[code: instance-too-long] * 🔥 **FAIL**Variable font instance name 'Big Shoulders Inline Display SC Thin Bold' formed by space-separated concatenation of font family name (nameID 1) and instance subfamily nameID 264 exceeds 32 characters.
This has been found to cause shaping issues for some accented letters in Microsoft Word on Windows 10 and 11.
[code: instance-too-long] * 🔥 **FAIL**Variable font instance name 'Big Shoulders Inline Display SC Thin Bold' formed by space-separated concatenation of font family name (nameID 1) and instance subfamily nameID 264 exceeds 32 characters.
This has been found to cause shaping issues for some accented letters in Microsoft Word on Windows 10 and 11.
[code: instance-too-long] * 🔥 **FAIL**Variable font instance name 'Big Shoulders Inline Display SC Thin ExtraBold' formed by space-separated concatenation of font family name (nameID 1) and instance subfamily nameID 265 exceeds 32 characters.
This has been found to cause shaping issues for some accented letters in Microsoft Word on Windows 10 and 11.
[code: instance-too-long] * 🔥 **FAIL**Variable font instance name 'Big Shoulders Inline Display SC Thin ExtraBold' formed by space-separated concatenation of font family name (nameID 1) and instance subfamily nameID 265 exceeds 32 characters.
This has been found to cause shaping issues for some accented letters in Microsoft Word on Windows 10 and 11.
[code: instance-too-long] * 🔥 **FAIL**Variable font instance name 'Big Shoulders Inline Display SC Thin Black' formed by space-separated concatenation of font family name (nameID 1) and instance subfamily nameID 266 exceeds 32 characters.
This has been found to cause shaping issues for some accented letters in Microsoft Word on Windows 10 and 11.
[code: instance-too-long] * 🔥 **FAIL**Variable font instance name 'Big Shoulders Inline Display SC Thin Black' formed by space-separated concatenation of font family name (nameID 1) and instance subfamily nameID 266 exceeds 32 characters.
This has been found to cause shaping issues for some accented letters in Microsoft Word on Windows 10 and 11.
[code: instance-too-long] * ⚠️ **WARN**Name ID 6 'BigShouldersInlineDisplaySC-Thin' exceeds 27 characters. This has been found to cause problems with PostScript printers, especially on Mac platforms.
[code: nameid6-too-long]The sum of hhea.ascender + abs(hhea.descender) + hhea.lineGap is 4788 when it should be at least 4800
[code: bad-hhea-range]In order to optimize performance on some legacy renderers, the value of unitsPerEm at the head table should ideally be a power of 2 between 16 to 16384. And values of 1000 and 2000 are also common and may be just fine as well. But we got 4000 instead.
[code: suboptimal]Interpolation issues were found in the font:
- Contour 3 point 20 in glyph 'g' has a kink between location wght=300 and location wght=900
[code: interpolation-issues]
The most common width is 1464 among a set of 5 math glyphs. The following math glyphs have a different width, though:
Width = 1544: plusminus, plus
Width = 1776: less
Width = 1536: greater, lessequal
Width = 1289: multiply
Width = 1436: approxequal
Width = 1532: greaterequal
[code: width-outliers]This font has a 'Soft Hyphen' character.
[code: softhyphen]The following glyphs could not be reached by codepoint or substitution rules:
- eight.subs
- five.subs
- four.subs
- nine.subs
- one.subs
- seven.subs
- six.subs
- three.subs
- two.subs
- zero.subs
[code: unreachable-glyphs]
The following glyphs have a counter-clockwise outer contour:
* a.ss01 has a counter-clockwise outer contour
* aacute.ss01 has a counter-clockwise outer contour
* abreve.ss01 has a counter-clockwise outer contour
* acircumflex.ss01 has a counter-clockwise outer contour
* adieresis.ss01 has a counter-clockwise outer contour
* agrave.ss01 has a counter-clockwise outer contour
* amacron.ss01 has a counter-clockwise outer contour
* aogonek.ss01 has a counter-clockwise outer contour
* aring.ss01 has a counter-clockwise outer contour
* atilde.ss01 has a counter-clockwise outer contour
* 14 more.
Use -F or --full-lists to disable shortening of long lists.
[code: ccw-outer-contour]No dotted circle glyph present
[code: missing-dotted-circle]The following codepoints supported by the font are not covered by any subsets defined in the font's metadata file, and will never be served. You can solve this by either manually adding additional subset declarations to METADATA.pb, or by editing the glyphset definitions.
Use -F or --full-lists to disable shortening of long lists.
Or you can add the above codepoints to one of the subsets supported by the font: latin
, latin-ext
, menu
, vietnamese
GPOS table lacks kerning info for the following non-ligated sequences:
- f + f
- f + i
- f + l
[code: lacks-kern-info]
This font file does not have a 'meta' table.
[code: lacks-meta-table]The stylistic set ss01 lacks a description string on the 'name' table.
[code: missing-description]Font does not follow some family naming recommendations:
Field | Value | Recommendation |
---|---|---|
Family Name | Big Shoulders Inline Display SC Thin | exceeds max length (31) |
ofl/bigshouldersinlinedisplay
[code: family-path] * ℹ️ **INFO**ofl/bigshouldersinlinedisplaysc
[code: family-path]This font contains the following optional tables:
- loca
- prep
- GPOS
- GSUB
- gasp
[code: optional-tables]
Found a git repo URL: https://github.com/xotypeco/big_shoulders
[code: url-found]This font doesn't have an ARTICLE.en_us.html file.
[code: missing-article]EPAR table not present in font. To learn more see https://github.com/fonttools/fontbakery/issues/818
[code: lacks-EPAR]These are the ppm ranges declared on the gasp table:
PPM <= 65535: flag = 0x0F - Use grid-fitting - Use grayscale rendering - Use gridfitting with ClearType symmetric smoothing - Use smoothing along multiple axes with ClearType®
[code: ranges]Hinting filesize impact:
ofl/bigshouldersinlinedisplaysc/BigShouldersInlineDisplaySC[wght].ttf | |
---|---|
Dehinted Size | 375.2kb |
Hinted Size | 375.3kb |
Increase | 24 bytes |
Change | 0.0 % |
Could not detect which version of ttfautohint was used in this font. It is typically specified as a comment in the font version entries of the 'name' table. Such font version strings are currently: ['Version 2.002']
[code: version-not-detected]💥 ERROR | ☠ FATAL | 🔥 FAIL | ⚠️ WARN | ⏩ SKIP | ℹ️ INFO | ✅ PASS | 🔎 DEBUG |
---|---|---|---|---|---|---|---|
0 | 0 | 3 | 12 | 40 | 11 | 185 | 0 |
0% | 0% | 1% | 5% | 16% | 4% | 74% | 0% |
Note: The following loglevels were omitted in this report:
fontbakery version: 0.12.7
These won't break the CI job for now, but will become effective after some time if nobody raises any concern.
The following glyphs lack their case-swapping counterparts:
Glyph present in the font | Missing case-swapping counterpart |
---|---|
U+01DD: LATIN SMALL LETTER TURNED E | U+018E: LATIN CAPITAL LETTER REVERSED E |
Name ID 4 'Big Shoulders Inline Display Thin' exceeds 32 characters. This has been found to cause problems with the dropdown menu in old versions of Microsoft Word as well as shaping issues for some accented letters in Microsoft Word on Windows 10 and 11.
[code: nameid4-too-long] * 🔥 **FAIL**Variable font instance name 'Big Shoulders Inline Display Thin Thin' formed by space-separated concatenation of font family name (nameID 1) and instance subfamily nameID 258 exceeds 32 characters.
This has been found to cause shaping issues for some accented letters in Microsoft Word on Windows 10 and 11.
[code: instance-too-long] * 🔥 **FAIL**Variable font instance name 'Big Shoulders Inline Display Thin Thin' formed by space-separated concatenation of font family name (nameID 1) and instance subfamily nameID 258 exceeds 32 characters.
This has been found to cause shaping issues for some accented letters in Microsoft Word on Windows 10 and 11.
[code: instance-too-long] * 🔥 **FAIL**Variable font instance name 'Big Shoulders Inline Display Thin ExtraLight' formed by space-separated concatenation of font family name (nameID 1) and instance subfamily nameID 259 exceeds 32 characters.
This has been found to cause shaping issues for some accented letters in Microsoft Word on Windows 10 and 11.
[code: instance-too-long] * 🔥 **FAIL**Variable font instance name 'Big Shoulders Inline Display Thin ExtraLight' formed by space-separated concatenation of font family name (nameID 1) and instance subfamily nameID 259 exceeds 32 characters.
This has been found to cause shaping issues for some accented letters in Microsoft Word on Windows 10 and 11.
[code: instance-too-long] * 🔥 **FAIL**Variable font instance name 'Big Shoulders Inline Display Thin Light' formed by space-separated concatenation of font family name (nameID 1) and instance subfamily nameID 260 exceeds 32 characters.
This has been found to cause shaping issues for some accented letters in Microsoft Word on Windows 10 and 11.
[code: instance-too-long] * 🔥 **FAIL**Variable font instance name 'Big Shoulders Inline Display Thin Light' formed by space-separated concatenation of font family name (nameID 1) and instance subfamily nameID 260 exceeds 32 characters.
This has been found to cause shaping issues for some accented letters in Microsoft Word on Windows 10 and 11.
[code: instance-too-long] * 🔥 **FAIL**Variable font instance name 'Big Shoulders Inline Display Thin Regular' formed by space-separated concatenation of font family name (nameID 1) and instance subfamily nameID 261 exceeds 32 characters.
This has been found to cause shaping issues for some accented letters in Microsoft Word on Windows 10 and 11.
[code: instance-too-long] * 🔥 **FAIL**Variable font instance name 'Big Shoulders Inline Display Thin Regular' formed by space-separated concatenation of font family name (nameID 1) and instance subfamily nameID 261 exceeds 32 characters.
This has been found to cause shaping issues for some accented letters in Microsoft Word on Windows 10 and 11.
[code: instance-too-long] * 🔥 **FAIL**Variable font instance name 'Big Shoulders Inline Display Thin Medium' formed by space-separated concatenation of font family name (nameID 1) and instance subfamily nameID 262 exceeds 32 characters.
This has been found to cause shaping issues for some accented letters in Microsoft Word on Windows 10 and 11.
[code: instance-too-long] * 🔥 **FAIL**Variable font instance name 'Big Shoulders Inline Display Thin Medium' formed by space-separated concatenation of font family name (nameID 1) and instance subfamily nameID 262 exceeds 32 characters.
This has been found to cause shaping issues for some accented letters in Microsoft Word on Windows 10 and 11.
[code: instance-too-long] * 🔥 **FAIL**Variable font instance name 'Big Shoulders Inline Display Thin SemiBold' formed by space-separated concatenation of font family name (nameID 1) and instance subfamily nameID 263 exceeds 32 characters.
This has been found to cause shaping issues for some accented letters in Microsoft Word on Windows 10 and 11.
[code: instance-too-long] * 🔥 **FAIL**Variable font instance name 'Big Shoulders Inline Display Thin SemiBold' formed by space-separated concatenation of font family name (nameID 1) and instance subfamily nameID 263 exceeds 32 characters.
This has been found to cause shaping issues for some accented letters in Microsoft Word on Windows 10 and 11.
[code: instance-too-long] * 🔥 **FAIL**Variable font instance name 'Big Shoulders Inline Display Thin Bold' formed by space-separated concatenation of font family name (nameID 1) and instance subfamily nameID 264 exceeds 32 characters.
This has been found to cause shaping issues for some accented letters in Microsoft Word on Windows 10 and 11.
[code: instance-too-long] * 🔥 **FAIL**Variable font instance name 'Big Shoulders Inline Display Thin Bold' formed by space-separated concatenation of font family name (nameID 1) and instance subfamily nameID 264 exceeds 32 characters.
This has been found to cause shaping issues for some accented letters in Microsoft Word on Windows 10 and 11.
[code: instance-too-long] * 🔥 **FAIL**Variable font instance name 'Big Shoulders Inline Display Thin ExtraBold' formed by space-separated concatenation of font family name (nameID 1) and instance subfamily nameID 265 exceeds 32 characters.
This has been found to cause shaping issues for some accented letters in Microsoft Word on Windows 10 and 11.
[code: instance-too-long] * 🔥 **FAIL**Variable font instance name 'Big Shoulders Inline Display Thin ExtraBold' formed by space-separated concatenation of font family name (nameID 1) and instance subfamily nameID 265 exceeds 32 characters.
This has been found to cause shaping issues for some accented letters in Microsoft Word on Windows 10 and 11.
[code: instance-too-long] * 🔥 **FAIL**Variable font instance name 'Big Shoulders Inline Display Thin Black' formed by space-separated concatenation of font family name (nameID 1) and instance subfamily nameID 266 exceeds 32 characters.
This has been found to cause shaping issues for some accented letters in Microsoft Word on Windows 10 and 11.
[code: instance-too-long] * 🔥 **FAIL**Variable font instance name 'Big Shoulders Inline Display Thin Black' formed by space-separated concatenation of font family name (nameID 1) and instance subfamily nameID 266 exceeds 32 characters.
This has been found to cause shaping issues for some accented letters in Microsoft Word on Windows 10 and 11.
[code: instance-too-long] * ⚠️ **WARN**Name ID 6 'BigShouldersInlineDisplay-Thin' exceeds 27 characters. This has been found to cause problems with PostScript printers, especially on Mac platforms.
[code: nameid6-too-long]In order to optimize performance on some legacy renderers, the value of unitsPerEm at the head table should ideally be a power of 2 between 16 to 16384. And values of 1000 and 2000 are also common and may be just fine as well. But we got 4000 instead.
[code: suboptimal]This font has a digital signature (DSIG table) which is only required - even if only a placeholder - on old programs like MS Office 2013 in order to work properly. The current recommendation is to completely remove the DSIG table.
[code: found-DSIG]Interpolation issues were found in the font:
- Contour 0 start point differs in glyph 'greaterequal' between location wght=100 and location wght=300
- Contour 1 start point differs in glyph 'greaterequal' between location wght=100 and location wght=300
- Contour 2 start point differs in glyph 'greaterequal' between location wght=100 and location wght=300
- Contour 3 point 20 in glyph 'g' has a kink between location wght=300 and location wght=900
[code: interpolation-issues]
The most common width is 1464 among a set of 5 math glyphs. The following math glyphs have a different width, though:
Width = 1544: plusminus, plus
Width = 1776: less
Width = 1536: lessequal, greater
Width = 1289: multiply
Width = 1436: approxequal
Width = 1532: greaterequal
[code: width-outliers]This font has a 'Soft Hyphen' character.
[code: softhyphen]The following glyphs could not be reached by codepoint or substitution rules:
- eight.subs
- five.subs
- four.subs
- nine.subs
- one.subs
- seven.subs
- six.subs
- three.subs
- two.subs
- zero.subs
[code: unreachable-glyphs]
The following glyphs have a counter-clockwise outer contour:
* section (U+00A7) has a counter-clockwise outer contour
[code: ccw-outer-contour]
No dotted circle glyph present
[code: missing-dotted-circle]The dot of soft dotted characters used in orthographies must disappear in the following strings: į̀ į́ į̂ į̃ į̄ į̌ ị̀ ị́ ị̂ ị̃ ị̄
The dot of soft dotted characters should disappear in other cases, for example: i̦̇ i̦̊ i̦̋ i̦̒ j̦̀ j̦́ j̦̃ j̦̄ j̦̆ j̦̇ j̦̈ j̦̉ j̦̊ j̦̋ ǰ̦ j̦̏ j̦̑ j̦̒ į̆ į̇
Your font fully covers the following languages that require the soft-dotted feature: Lithuanian (Latn, 2,357,094 speakers), Ebira (Latn, 2,200,000 speakers), Ma’di (Latn, 584,000 speakers), Dutch (Latn, 31,709,104 speakers), Navajo (Latn, 166,319 speakers).
Your font does not cover the following languages that require the soft-dotted feature: Sar (Latn, 500,000 speakers), Mfumte (Latn, 79,000 speakers), Ejagham (Latn, 120,000 speakers), Koonzime (Latn, 40,000 speakers), Gulay (Latn, 250,478 speakers), Zapotec (Latn, 490,000 speakers), Yala (Latn, 200,000 speakers), Belarusian (Cyrl, 10,064,517 speakers), Dan (Latn, 1,099,244 speakers), Nateni (Latn, 100,000 speakers), Bete-Bendi (Latn, 100,000 speakers), Basaa (Latn, 332,940 speakers), Southern Kisi (Latn, 360,000 speakers), Kom (Latn, 360,685 speakers), Ijo, Southeast (Latn, 2,471,000 speakers), Ukrainian (Cyrl, 29,273,587 speakers), Bafut (Latn, 158,146 speakers), Ekpeye (Latn, 226,000 speakers), Ngbaka (Latn, 1,020,000 speakers), Makaa (Latn, 221,000 speakers), Lugbara (Latn, 2,200,000 speakers), Igbo (Latn, 27,823,640 speakers), South Central Banda (Latn, 244,000 speakers), Avokaya (Latn, 100,000 speakers), Vute (Latn, 21,000 speakers), Kpelle, Guinea (Latn, 622,000 speakers), Cicipu (Latn, 44,000 speakers), Nzakara (Latn, 50,000 speakers), Dii (Latn, 71,000 speakers), Fur (Latn, 1,230,163 speakers), Mundani (Latn, 34,000 speakers), Mango (Latn, 77,000 speakers), Aghem (Latn, 38,843 speakers).
[code: soft-dotted]The following codepoints supported by the font are not covered by any subsets defined in the font's metadata file, and will never be served. You can solve this by either manually adding additional subset declarations to METADATA.pb, or by editing the glyphset definitions.
Use -F or --full-lists to disable shortening of long lists.
Or you can add the above codepoints to one of the subsets supported by the font: latin
, latin-ext
, menu
, vietnamese
Please consider updating the url from 'https://scripts.sil.org/OFL' to 'https://openfontlicense.org'.
[code: old-url]GPOS table lacks kerning info for the following non-ligated sequences:
- f + f
- f + i
- f + l
[code: lacks-kern-info]
This font file does not have a 'meta' table.
[code: lacks-meta-table]The stylistic set ss01 lacks a description string on the 'name' table.
[code: missing-description]Font does not follow some family naming recommendations:
Field | Value | Recommendation |
---|---|---|
Family Name | Big Shoulders Inline Display Thin | exceeds max length (31) |
ofl/bigshouldersinlinedisplay
[code: family-path] * ℹ️ **INFO**ofl/bigshouldersinlinedisplaysc
[code: family-path]This font contains the following optional tables:
- loca
- prep
- GPOS
- GSUB
- gasp
[code: optional-tables]
Found a git repo URL: https://github.com/xotypeco/big_shoulders
[code: url-found]This font doesn't have an ARTICLE.en_us.html file.
[code: missing-article]EPAR table not present in font. To learn more see https://github.com/fonttools/fontbakery/issues/818
[code: lacks-EPAR]These are the ppm ranges declared on the gasp table:
PPM <= 65535: flag = 0x0F - Use grid-fitting - Use grayscale rendering - Use gridfitting with ClearType symmetric smoothing - Use smoothing along multiple axes with ClearType®
[code: ranges]Hinting filesize impact:
ofl/bigshouldersinlinedisplay/BigShouldersInlineDisplay[wght].ttf | |
---|---|
Dehinted Size | 410.2kb |
Hinted Size | 410.2kb |
Increase | 24 bytes |
Change | 0.0 % |
Could not detect which version of ttfautohint was used in this font. It is typically specified as a comment in the font version entries of the 'name' table. Such font version strings are currently: ['Version 2.002']
[code: version-not-detected]💥 ERROR | ☠ FATAL | 🔥 FAIL | ⚠️ WARN | ⏩ SKIP | ℹ️ INFO | ✅ PASS | 🔎 DEBUG |
---|---|---|---|---|---|---|---|
0 | 0 | 2 | 15 | 41 | 11 | 179 | 0 |
0% | 0% | 1% | 6% | 17% | 4% | 72% | 0% |
Note: The following loglevels were omitted in this report:
fontbakery version: 0.12.7
These won't break the CI job for now, but will become effective after some time if nobody raises any concern.
The following glyphs lack their case-swapping counterparts:
Glyph present in the font | Missing case-swapping counterpart |
---|---|
U+01DD: LATIN SMALL LETTER TURNED E | U+018E: LATIN CAPITAL LETTER REVERSED E |
Name ID 4 'Big Shoulders Inline Display SC Thin' exceeds 32 characters. This has been found to cause problems with the dropdown menu in old versions of Microsoft Word as well as shaping issues for some accented letters in Microsoft Word on Windows 10 and 11.
[code: nameid4-too-long] * 🔥 **FAIL**Variable font instance name 'Big Shoulders Inline Display SC Thin Thin' formed by space-separated concatenation of font family name (nameID 1) and instance subfamily nameID 258 exceeds 32 characters.
This has been found to cause shaping issues for some accented letters in Microsoft Word on Windows 10 and 11.
[code: instance-too-long] * 🔥 **FAIL**Variable font instance name 'Big Shoulders Inline Display SC Thin Thin' formed by space-separated concatenation of font family name (nameID 1) and instance subfamily nameID 258 exceeds 32 characters.
This has been found to cause shaping issues for some accented letters in Microsoft Word on Windows 10 and 11.
[code: instance-too-long] * 🔥 **FAIL**Variable font instance name 'Big Shoulders Inline Display SC Thin ExtraLight' formed by space-separated concatenation of font family name (nameID 1) and instance subfamily nameID 259 exceeds 32 characters.
This has been found to cause shaping issues for some accented letters in Microsoft Word on Windows 10 and 11.
[code: instance-too-long] * 🔥 **FAIL**Variable font instance name 'Big Shoulders Inline Display SC Thin ExtraLight' formed by space-separated concatenation of font family name (nameID 1) and instance subfamily nameID 259 exceeds 32 characters.
This has been found to cause shaping issues for some accented letters in Microsoft Word on Windows 10 and 11.
[code: instance-too-long] * 🔥 **FAIL**Variable font instance name 'Big Shoulders Inline Display SC Thin Light' formed by space-separated concatenation of font family name (nameID 1) and instance subfamily nameID 260 exceeds 32 characters.
This has been found to cause shaping issues for some accented letters in Microsoft Word on Windows 10 and 11.
[code: instance-too-long] * 🔥 **FAIL**Variable font instance name 'Big Shoulders Inline Display SC Thin Light' formed by space-separated concatenation of font family name (nameID 1) and instance subfamily nameID 260 exceeds 32 characters.
This has been found to cause shaping issues for some accented letters in Microsoft Word on Windows 10 and 11.
[code: instance-too-long] * 🔥 **FAIL**Variable font instance name 'Big Shoulders Inline Display SC Thin Regular' formed by space-separated concatenation of font family name (nameID 1) and instance subfamily nameID 261 exceeds 32 characters.
This has been found to cause shaping issues for some accented letters in Microsoft Word on Windows 10 and 11.
[code: instance-too-long] * 🔥 **FAIL**Variable font instance name 'Big Shoulders Inline Display SC Thin Regular' formed by space-separated concatenation of font family name (nameID 1) and instance subfamily nameID 261 exceeds 32 characters.
This has been found to cause shaping issues for some accented letters in Microsoft Word on Windows 10 and 11.
[code: instance-too-long] * 🔥 **FAIL**Variable font instance name 'Big Shoulders Inline Display SC Thin Medium' formed by space-separated concatenation of font family name (nameID 1) and instance subfamily nameID 262 exceeds 32 characters.
This has been found to cause shaping issues for some accented letters in Microsoft Word on Windows 10 and 11.
[code: instance-too-long] * 🔥 **FAIL**Variable font instance name 'Big Shoulders Inline Display SC Thin Medium' formed by space-separated concatenation of font family name (nameID 1) and instance subfamily nameID 262 exceeds 32 characters.
This has been found to cause shaping issues for some accented letters in Microsoft Word on Windows 10 and 11.
[code: instance-too-long] * 🔥 **FAIL**Variable font instance name 'Big Shoulders Inline Display SC Thin SemiBold' formed by space-separated concatenation of font family name (nameID 1) and instance subfamily nameID 263 exceeds 32 characters.
This has been found to cause shaping issues for some accented letters in Microsoft Word on Windows 10 and 11.
[code: instance-too-long] * 🔥 **FAIL**Variable font instance name 'Big Shoulders Inline Display SC Thin SemiBold' formed by space-separated concatenation of font family name (nameID 1) and instance subfamily nameID 263 exceeds 32 characters.
This has been found to cause shaping issues for some accented letters in Microsoft Word on Windows 10 and 11.
[code: instance-too-long] * 🔥 **FAIL**Variable font instance name 'Big Shoulders Inline Display SC Thin Bold' formed by space-separated concatenation of font family name (nameID 1) and instance subfamily nameID 264 exceeds 32 characters.
This has been found to cause shaping issues for some accented letters in Microsoft Word on Windows 10 and 11.
[code: instance-too-long] * 🔥 **FAIL**Variable font instance name 'Big Shoulders Inline Display SC Thin Bold' formed by space-separated concatenation of font family name (nameID 1) and instance subfamily nameID 264 exceeds 32 characters.
This has been found to cause shaping issues for some accented letters in Microsoft Word on Windows 10 and 11.
[code: instance-too-long] * 🔥 **FAIL**Variable font instance name 'Big Shoulders Inline Display SC Thin ExtraBold' formed by space-separated concatenation of font family name (nameID 1) and instance subfamily nameID 265 exceeds 32 characters.
This has been found to cause shaping issues for some accented letters in Microsoft Word on Windows 10 and 11.
[code: instance-too-long] * 🔥 **FAIL**Variable font instance name 'Big Shoulders Inline Display SC Thin ExtraBold' formed by space-separated concatenation of font family name (nameID 1) and instance subfamily nameID 265 exceeds 32 characters.
This has been found to cause shaping issues for some accented letters in Microsoft Word on Windows 10 and 11.
[code: instance-too-long] * 🔥 **FAIL**Variable font instance name 'Big Shoulders Inline Display SC Thin Black' formed by space-separated concatenation of font family name (nameID 1) and instance subfamily nameID 266 exceeds 32 characters.
This has been found to cause shaping issues for some accented letters in Microsoft Word on Windows 10 and 11.
[code: instance-too-long] * 🔥 **FAIL**Variable font instance name 'Big Shoulders Inline Display SC Thin Black' formed by space-separated concatenation of font family name (nameID 1) and instance subfamily nameID 266 exceeds 32 characters.
This has been found to cause shaping issues for some accented letters in Microsoft Word on Windows 10 and 11.
[code: instance-too-long] * ⚠️ **WARN**Name ID 6 'BigShouldersInlineDisplaySC-Thin' exceeds 27 characters. This has been found to cause problems with PostScript printers, especially on Mac platforms.
[code: nameid6-too-long]The sum of hhea.ascender + abs(hhea.descender) + hhea.lineGap is 4788 when it should be at least 4800
[code: bad-hhea-range]In order to optimize performance on some legacy renderers, the value of unitsPerEm at the head table should ideally be a power of 2 between 16 to 16384. And values of 1000 and 2000 are also common and may be just fine as well. But we got 4000 instead.
[code: suboptimal]Interpolation issues were found in the font:
- Contour 3 point 20 in glyph 'g' has a kink between location wght=300 and location wght=900
[code: interpolation-issues]
The most common width is 1464 among a set of 5 math glyphs. The following math glyphs have a different width, though:
Width = 1544: plusminus, plus
Width = 1776: less
Width = 1536: greater, lessequal
Width = 1289: multiply
Width = 1436: approxequal
Width = 1532: greaterequal
[code: width-outliers]This font has a 'Soft Hyphen' character.
[code: softhyphen]The following glyphs could not be reached by codepoint or substitution rules:
- eight.subs
- five.subs
- four.subs
- nine.subs
- one.subs
- seven.subs
- six.subs
- three.subs
- two.subs
- zero.subs
[code: unreachable-glyphs]
The following glyphs have a counter-clockwise outer contour:
* section (U+00A7) has a counter-clockwise outer contour
[code: ccw-outer-contour]
No dotted circle glyph present
[code: missing-dotted-circle]The following codepoints supported by the font are not covered by any subsets defined in the font's metadata file, and will never be served. You can solve this by either manually adding additional subset declarations to METADATA.pb, or by editing the glyphset definitions.
Use -F or --full-lists to disable shortening of long lists.
Or you can add the above codepoints to one of the subsets supported by the font: latin
, latin-ext
, menu
, vietnamese
GPOS table lacks kerning info for the following non-ligated sequences:
- f + f
- f + i
- f + l
[code: lacks-kern-info]
This font file does not have a 'meta' table.
[code: lacks-meta-table]The stylistic set ss01 lacks a description string on the 'name' table.
[code: missing-description]Font does not follow some family naming recommendations:
Field | Value | Recommendation |
---|---|---|
Family Name | Big Shoulders Inline Display SC Thin | exceeds max length (31) |
ofl/bigshouldersinlinedisplay
[code: family-path] * ℹ️ **INFO**ofl/bigshouldersinlinedisplaysc
[code: family-path]This font contains the following optional tables:
- loca
- prep
- GPOS
- GSUB
- gasp
[code: optional-tables]
Found a git repo URL: https://github.com/xotypeco/big_shoulders
[code: url-found]This font doesn't have an ARTICLE.en_us.html file.
[code: missing-article]EPAR table not present in font. To learn more see https://github.com/fonttools/fontbakery/issues/818
[code: lacks-EPAR]These are the ppm ranges declared on the gasp table:
PPM <= 65535: flag = 0x0F - Use grid-fitting - Use grayscale rendering - Use gridfitting with ClearType symmetric smoothing - Use smoothing along multiple axes with ClearType®
[code: ranges]Hinting filesize impact:
ofl/bigshouldersinlinedisplaysc/BigShouldersInlineDisplaySC[wght].ttf | |
---|---|
Dehinted Size | 375.2kb |
Hinted Size | 375.3kb |
Increase | 24 bytes |
Change | 0.0 % |
Could not detect which version of ttfautohint was used in this font. It is typically specified as a comment in the font version entries of the 'name' table. Such font version strings are currently: ['Version 2.002']
[code: version-not-detected]💥 ERROR | ☠ FATAL | 🔥 FAIL | ⚠️ WARN | ⏩ SKIP | ℹ️ INFO | ✅ PASS | 🔎 DEBUG |
---|---|---|---|---|---|---|---|
0 | 0 | 3 | 12 | 41 | 11 | 181 | 0 |
0% | 0% | 1% | 5% | 17% | 4% | 73% | 0% |
Note: The following loglevels were omitted in this report:
Taken from the upstream repo https://github.com/xotypeco/big_shoulders at commit https://github.com/xotypeco/big_shouldersi/commit/0b3d09a86862b19efae28eae0cd868f17c476b20.
PR Checklist: