Closed simoncozens closed 1 week ago
fontbakery version: 0.12.7
These won't break the CI job for now, but will become effective after some time if nobody raises any concern.
The following glyphs lack their case-swapping counterparts:
Glyph present in the font | Missing case-swapping counterpart |
---|---|
U+039E: GREEK CAPITAL LETTER XI | U+03BE: GREEK SMALL LETTER XI |
OS/2.usWinAscent value should be equal or greater than 1022, but got 945 instead
[code: ascent] * 🔥 **FAIL**OS/2.usWinDescent value should be equal or greater than 378, but got 265 instead
[code: descent]Repository URL is https://github.com/weiweihuanghuang/fragment-mono
But: HTML description has 'github.com/twardoch/urw-core35-fonts'
[code: mismatch]GF_Latin_Core glyphset:
Language | FAIL messages |
---|---|
nl_Latn (Dutch) | Shaper didn't attach acutecomb to uni0237.sc |
^ | Shaper didn't attach acutecomb to J |
The OpenType spec recomments at https://learn.microsoft.com/en-us/typography/opentype/spec/recom#hhea-table that hhea.numberOfHMetrics be set to 3 but this font has 714 instead. Please read https://github.com/fonttools/fonttools/issues/3014 to decide whether this makes sense for your font.
[code: bad-numberOfHMetrics]This check inspects the glyph outlines and detects the total number of contours in each of them. The expected values are infered from the typical ammounts of contours observed in a large collection of reference font families. The divergences listed below may simply indicate a significantly different design on some of your glyphs. On the other hand, some of these may flag actual bugs in the font such as glyphs mapped to an incorrect codepoint. Please consider reviewing the design and codepoint assignment of these to make sure they are correct.
The following glyphs do not have the recommended number of contours:
- Glyph name: aogonek Contours detected: 3 Expected: 2
- Glyph name: eogonek Contours detected: 3 Expected: 2
- Glyph name: Uogonek Contours detected: 2 Expected: 1
- Glyph name: uogonek Contours detected: 2 Expected: 1
- Glyph name: Uogonek Contours detected: 2 Expected: 1
- Glyph name: aogonek Contours detected: 3 Expected: 2
- Glyph name: eogonek Contours detected: 3 Expected: 2
- Glyph name: uogonek Contours detected: 2 Expected: 1
[code: contour-count]
The following glyph names may be too long for some legacy systems which may expect a maximum 31-characters length limit: asciitilde_asciitilde_greater.liga, less_numbersign_hyphen_hyphen.liga and semicolon_semicolon_semicolon.liga
[code: legacy-long-names]The following glyphs have on-curve points which have potentially incorrect y coordinates:
* a (U+0061): X=419.5,Y=2.0 (should be at baseline 0?)
* aacute (U+00E1): X=419.5,Y=2.0 (should be at baseline 0?)
* abreve (U+0103): X=419.5,Y=2.0 (should be at baseline 0?)
* uni01CE (U+01CE): X=419.5,Y=2.0 (should be at baseline 0?)
* acircumflex (U+00E2): X=419.5,Y=2.0 (should be at baseline 0?)
* adieresis (U+00E4): X=419.5,Y=2.0 (should be at baseline 0?)
* agrave (U+00E0): X=419.5,Y=2.0 (should be at baseline 0?)
* amacron (U+0101): X=419.5,Y=2.0 (should be at baseline 0?)
* amacron (U+0101): X=244.0,Y=701.0 (should be at cap-height 699?)
* amacron (U+0101): X=518.0,Y=701.0 (should be at cap-height 699?)
* 64 more.
Use -F or --full-lists to disable shortening of long lists.
[code: found-misalignments]The following glyphs have colinear vectors:
* bar_equal_greater.liga: L<<-1056.0,431.0>--<-1051.0,454.0>> -> L<<-1051.0,454.0>--<-1011.0,642.0>>
* bar_equal_greater.liga: L<<-1131.0,77.0>--<-1087.0,285.0>> -> L<<-1087.0,285.0>--<-1086.0,289.0>>
* bar_hyphen_greater.liga: L<<-1110.0,77.0>--<-1053.0,345.0>> -> L<<-1053.0,345.0>--<-1042.0,399.0>>
* eng (U+014B): L<<371.0,-37.0>--<379.0,0.0>> -> L<<379.0,0.0>--<456.0,363.0>>
* eng (U+014B): L<<542.0,376.0>--<462.0,0.0>> -> L<<462.0,0.0>--<449.0,-59.0>>
* less_equal_bar.liga: L<<459.0,289.0>--<454.0,266.0>> -> L<<454.0,266.0>--<414.0,78.0>>
* less_equal_bar.liga: L<<534.0,643.0>--<490.0,435.0>> -> L<<490.0,435.0>--<489.0,431.0>>
* less_hyphen_bar.liga: L<<534.0,643.0>--<477.0,375.0>> -> L<<477.0,375.0>--<466.0,321.0>>
[code: found-colinear-vectors]
The following glyphs have jaggy segments:
* m.sc: L<<432.0,0.0>--<534.0,477.0>>/L<<534.0,477.0>--<299.0,0.0>> = 14.157592127600394
* trademark (U+2122): L<<418.0,332.0>--<428.0,639.0>>/L<<428.0,639.0>--<363.0,332.0>> = 10.08883041066053
* trademark (U+2122): L<<531.0,332.0>--<596.0,639.0>>/L<<596.0,639.0>--<477.0,332.0>> = 9.232951420697566
* uni20A9 (U+20A9): L<<229.0,699.0>--<162.0,93.0>>/L<<162.0,93.0>--<360.0,699.0>> = 11.784848165590649
* uni20A9 (U+20A9): L<<319.0,0.0>--<375.0,579.0>>/L<<375.0,579.0>--<187.0,0.0>> = 12.464119629827673
* uni20A9 (U+20A9): L<<442.0,699.0>--<382.0,93.0>>/L<<382.0,93.0>--<573.0,699.0>> = 11.83946742345819
* uni2116 (U+2116): L<<164.0,0.0>--<172.0,592.0>>/L<<172.0,592.0>--<45.0,0.0>> = 11.333755455975231
* uni2116 (U+2116): L<<222.0,699.0>--<216.0,102.0>>/L<<216.0,102.0>--<344.0,699.0>> = 11.525493565128695
[code: found-jaggy-segments]
No dotted circle glyph present
[code: missing-dotted-circle]It seems that URW Design Studio is still not listed on the designers catalog. Please submit a photo and a link to a webpage where people can learn more about the work of this designer/typefoundry.
[code: profile-not-found]The following codepoints supported by the font are not covered by any subsets defined in the font's metadata file, and will never be served. You can solve this by either manually adding additional subset declarations to METADATA.pb, or by editing the glyphset definitions.
Use -F or --full-lists to disable shortening of long lists.
Or you can add the above codepoints to one of the subsets supported by the font: cyrillic-ext
, latin
, latin-ext
, menu
This font file does not have a 'meta' table.
[code: lacks-meta-table]ofl/fragmentmono
[code: family-path] * ℹ️ **INFO**ofl/fragmentmonosc
[code: family-path]This font contains the following optional tables:
- cvt
- fpgm
- loca
- prep
- GPOS
- GSUB
- gasp
[code: optional-tables]
Found a git repo URL: https://github.com/twardoch/urw-core35-fonts
[code: url-found] * ℹ️ **INFO**Found a git repo URL: https://github.com/weiweihuanghuang/fragment-mono/
[code: url-found]This font doesn't have an ARTICLE.en_us.html file.
[code: missing-article]EPAR table not present in font. To learn more see https://github.com/fonttools/fontbakery/issues/818
[code: lacks-EPAR]These are the ppm ranges declared on the gasp table:
PPM <= 65535: flag = 0x0F - Use grid-fitting - Use grayscale rendering - Use gridfitting with ClearType symmetric smoothing - Use smoothing along multiple axes with ClearType®
[code: ranges]The following glyphs lack their case-swapping counterparts:
Glyph present in the font | Missing case-swapping counterpart |
---|---|
U+039E: GREEK CAPITAL LETTER XI | U+03BE: GREEK SMALL LETTER XI |
OS/2.usWinAscent value should be equal or greater than 1022, but got 945 instead
[code: ascent] * 🔥 **FAIL**OS/2.usWinDescent value should be equal or greater than 378, but got 265 instead
[code: descent]Repository URL is https://github.com/weiweihuanghuang/fragment-mono
But: HTML description has 'github.com/twardoch/urw-core35-fonts'
[code: mismatch]GF_Latin_Core glyphset:
Language | FAIL messages |
---|---|
nl_Latn (Dutch) | Shaper didn't attach acutecomb to uni0237.sc |
^ | Shaper didn't attach acutecomb to J |
The OpenType spec recomments at https://learn.microsoft.com/en-us/typography/opentype/spec/recom#hhea-table that hhea.numberOfHMetrics be set to 3 but this font has 714 instead. Please read https://github.com/fonttools/fonttools/issues/3014 to decide whether this makes sense for your font.
[code: bad-numberOfHMetrics]This check inspects the glyph outlines and detects the total number of contours in each of them. The expected values are infered from the typical ammounts of contours observed in a large collection of reference font families. The divergences listed below may simply indicate a significantly different design on some of your glyphs. On the other hand, some of these may flag actual bugs in the font such as glyphs mapped to an incorrect codepoint. Please consider reviewing the design and codepoint assignment of these to make sure they are correct.
The following glyphs do not have the recommended number of contours:
- Glyph name: aogonek Contours detected: 3 Expected: 2
- Glyph name: eogonek Contours detected: 3 Expected: 2
- Glyph name: Uogonek Contours detected: 2 Expected: 1
- Glyph name: uogonek Contours detected: 2 Expected: 1
- Glyph name: Uogonek Contours detected: 2 Expected: 1
- Glyph name: aogonek Contours detected: 3 Expected: 2
- Glyph name: eogonek Contours detected: 3 Expected: 2
- Glyph name: uogonek Contours detected: 2 Expected: 1
[code: contour-count]
The following glyph names may be too long for some legacy systems which may expect a maximum 31-characters length limit: asciitilde_asciitilde_greater.liga, less_numbersign_hyphen_hyphen.liga and semicolon_semicolon_semicolon.liga
[code: legacy-long-names]The following glyphs have on-curve points which have potentially incorrect y coordinates:
* uni1E9E (U+1E9E): X=435.5,Y=-1.0 (should be at baseline 0?)
* uni1E9E (U+1E9E): X=260.0,Y=-1.0 (should be at baseline 0?)
* a (U+0061): X=340.0,Y=0.5 (should be at baseline 0?)
* aacute (U+00E1): X=340.0,Y=0.5 (should be at baseline 0?)
* abreve (U+0103): X=340.0,Y=0.5 (should be at baseline 0?)
* uni01CE (U+01CE): X=340.0,Y=0.5 (should be at baseline 0?)
* acircumflex (U+00E2): X=340.0,Y=0.5 (should be at baseline 0?)
* adieresis (U+00E4): X=340.0,Y=0.5 (should be at baseline 0?)
* agrave (U+00E0): X=340.0,Y=0.5 (should be at baseline 0?)
* amacron (U+0101): X=340.0,Y=0.5 (should be at baseline 0?)
* 48 more.
Use -F or --full-lists to disable shortening of long lists.
[code: found-misalignments]The following glyphs have segments which seem very short:
* AE (U+00C6) contains a short segment L<<306.0,619.0>--<302.0,619.0>>
* N (U+004E) contains a short segment L<<163.0,559.0>--<162.0,559.0>>
* N (U+004E) contains a short segment L<<455.0,135.0>--<456.0,135.0>>
* Nacute (U+0143) contains a short segment L<<163.0,559.0>--<162.0,559.0>>
* Nacute (U+0143) contains a short segment L<<455.0,135.0>--<456.0,135.0>>
* Ncaron (U+0147) contains a short segment L<<163.0,559.0>--<162.0,559.0>>
* Ncaron (U+0147) contains a short segment L<<455.0,135.0>--<456.0,135.0>>
* uni0145 (U+0145) contains a short segment L<<163.0,559.0>--<162.0,559.0>>
* uni0145 (U+0145) contains a short segment L<<455.0,135.0>--<456.0,135.0>>
* Ntilde (U+00D1) contains a short segment L<<163.0,559.0>--<162.0,559.0>>
* 77 more.
Use -F or --full-lists to disable shortening of long lists.
[code: found-short-segments]The following glyphs have jaggy segments:
* less_asciitilde_greater.liga: B<<342.0,339.0>-<328.0,331.0>-<312.0,310.0>>/L<<312.0,310.0>--<342.0,339.0>> = 8.667073653095745
* less_asciitilde_greater.liga: L<<119.0,121.0>--<284.0,283.0>>/B<<284.0,283.0>-<255.0,262.0>-<217.0,262.0>> = 8.564642314364727
* less_asciitilde_greater.liga: L<<312.0,310.0>--<342.0,339.0>>/B<<342.0,339.0>-<328.0,331.0>-<312.0,310.0>> = 14.284096771978573
* trademark (U+2122): L<<403.0,332.0>--<348.0,639.0>>/L<<348.0,639.0>--<348.0,332.0>> = 10.15696551936229
* trademark (U+2122): L<<516.0,332.0>--<516.0,639.0>>/L<<516.0,639.0>--<462.0,332.0>> = 9.976036422751434
* uni20A9 (U+20A9): L<<137.0,699.0>--<199.0,93.0>>/L<<199.0,93.0>--<268.0,699.0>> = 12.337420712236526
* uni20A9 (U+20A9): L<<350.0,699.0>--<420.0,93.0>>/L<<420.0,93.0>--<481.0,699.0>> = 12.337157115263608
* uni20A9 (U+20A9): L<<375.0,0.0>--<309.0,579.0>>/L<<309.0,579.0>--<243.0,0.0>> = 13.006111889763387
* uni2116 (U+2116): L<<129.0,699.0>--<250.0,118.0>>/L<<250.0,118.0>--<250.0,699.0>> = 11.764350807103282
* uni2116 (U+2116): L<<220.0,0.0>--<102.0,576.0>>/L<<102.0,576.0>--<102.0,0.0>> = 11.577489206021184
[code: found-jaggy-segments]
No dotted circle glyph present
[code: missing-dotted-circle]It seems that URW Design Studio is still not listed on the designers catalog. Please submit a photo and a link to a webpage where people can learn more about the work of this designer/typefoundry.
[code: profile-not-found]The following codepoints supported by the font are not covered by any subsets defined in the font's metadata file, and will never be served. You can solve this by either manually adding additional subset declarations to METADATA.pb, or by editing the glyphset definitions.
Use -F or --full-lists to disable shortening of long lists.
Or you can add the above codepoints to one of the subsets supported by the font: cyrillic-ext
, latin
, latin-ext
, menu
This font file does not have a 'meta' table.
[code: lacks-meta-table]ofl/fragmentmono
[code: family-path] * ℹ️ **INFO**ofl/fragmentmonosc
[code: family-path]This font contains the following optional tables:
- cvt
- fpgm
- loca
- prep
- GPOS
- GSUB
- gasp
[code: optional-tables]
Found a git repo URL: https://github.com/twardoch/urw-core35-fonts
[code: url-found] * ℹ️ **INFO**Found a git repo URL: https://github.com/weiweihuanghuang/fragment-mono/
[code: url-found]This font doesn't have an ARTICLE.en_us.html file.
[code: missing-article]EPAR table not present in font. To learn more see https://github.com/fonttools/fontbakery/issues/818
[code: lacks-EPAR]These are the ppm ranges declared on the gasp table:
PPM <= 65535: flag = 0x0F - Use grid-fitting - Use grayscale rendering - Use gridfitting with ClearType symmetric smoothing - Use smoothing along multiple axes with ClearType®
[code: ranges]💥 ERROR | ☠ FATAL | 🔥 FAIL | ⚠️ WARN | ⏩ SKIP | ℹ️ INFO | ✅ PASS | 🔎 DEBUG |
---|---|---|---|---|---|---|---|
0 | 0 | 8 | 22 | 122 | 17 | 309 | 0 |
0% | 0% | 2% | 5% | 26% | 4% | 65% | 0% |
Note: The following loglevels were omitted in this report:
fontbakery version: 0.12.7
These won't break the CI job for now, but will become effective after some time if nobody raises any concern.
The following glyphs lack their case-swapping counterparts:
Glyph present in the font | Missing case-swapping counterpart |
---|---|
U+039E: GREEK CAPITAL LETTER XI | U+03BE: GREEK SMALL LETTER XI |
OS/2.usWinAscent value should be equal or greater than 1022, but got 945 instead
[code: ascent] * 🔥 **FAIL**OS/2.usWinDescent value should be equal or greater than 378, but got 265 instead
[code: descent]Repository URL is https://github.com/weiweihuanghuang/fragment-mono
But: HTML description has 'github.com/twardoch/urw-core35-fonts'
[code: mismatch]GF_Latin_Core glyphset:
Language | FAIL messages |
---|---|
nl_Latn (Dutch) | Shaper didn't attach acutecomb to uni0237.sc |
^ | Shaper didn't attach acutecomb to J |
The OpenType spec recomments at https://learn.microsoft.com/en-us/typography/opentype/spec/recom#hhea-table that hhea.numberOfHMetrics be set to 3 but this font has 714 instead. Please read https://github.com/fonttools/fonttools/issues/3014 to decide whether this makes sense for your font.
[code: bad-numberOfHMetrics]This check inspects the glyph outlines and detects the total number of contours in each of them. The expected values are infered from the typical ammounts of contours observed in a large collection of reference font families. The divergences listed below may simply indicate a significantly different design on some of your glyphs. On the other hand, some of these may flag actual bugs in the font such as glyphs mapped to an incorrect codepoint. Please consider reviewing the design and codepoint assignment of these to make sure they are correct.
The following glyphs do not have the recommended number of contours:
- Glyph name: aogonek Contours detected: 3 Expected: 2
- Glyph name: eogonek Contours detected: 3 Expected: 2
- Glyph name: Uogonek Contours detected: 2 Expected: 1
- Glyph name: uogonek Contours detected: 2 Expected: 1
- Glyph name: Uogonek Contours detected: 2 Expected: 1
- Glyph name: aogonek Contours detected: 3 Expected: 2
- Glyph name: eogonek Contours detected: 3 Expected: 2
- Glyph name: uogonek Contours detected: 2 Expected: 1
[code: contour-count]
The following glyph names may be too long for some legacy systems which may expect a maximum 31-characters length limit: asciitilde_asciitilde_greater.liga, less_numbersign_hyphen_hyphen.liga and semicolon_semicolon_semicolon.liga
[code: legacy-long-names]The following glyphs have on-curve points which have potentially incorrect y coordinates:
* a (U+0061): X=419.5,Y=2.0 (should be at baseline 0?)
* aacute (U+00E1): X=419.5,Y=2.0 (should be at baseline 0?)
* abreve (U+0103): X=419.5,Y=2.0 (should be at baseline 0?)
* uni01CE (U+01CE): X=419.5,Y=2.0 (should be at baseline 0?)
* acircumflex (U+00E2): X=419.5,Y=2.0 (should be at baseline 0?)
* adieresis (U+00E4): X=419.5,Y=2.0 (should be at baseline 0?)
* agrave (U+00E0): X=419.5,Y=2.0 (should be at baseline 0?)
* amacron (U+0101): X=419.5,Y=2.0 (should be at baseline 0?)
* amacron (U+0101): X=244.0,Y=701.0 (should be at cap-height 699?)
* amacron (U+0101): X=518.0,Y=701.0 (should be at cap-height 699?)
* 64 more.
Use -F or --full-lists to disable shortening of long lists.
[code: found-misalignments]The following glyphs have colinear vectors:
* bar_equal_greater.liga: L<<-1056.0,431.0>--<-1051.0,454.0>> -> L<<-1051.0,454.0>--<-1011.0,642.0>>
* bar_equal_greater.liga: L<<-1131.0,77.0>--<-1087.0,285.0>> -> L<<-1087.0,285.0>--<-1086.0,289.0>>
* bar_hyphen_greater.liga: L<<-1110.0,77.0>--<-1053.0,345.0>> -> L<<-1053.0,345.0>--<-1042.0,399.0>>
* eng (U+014B): L<<371.0,-37.0>--<379.0,0.0>> -> L<<379.0,0.0>--<456.0,363.0>>
* eng (U+014B): L<<542.0,376.0>--<462.0,0.0>> -> L<<462.0,0.0>--<449.0,-59.0>>
* less_equal_bar.liga: L<<459.0,289.0>--<454.0,266.0>> -> L<<454.0,266.0>--<414.0,78.0>>
* less_equal_bar.liga: L<<534.0,643.0>--<490.0,435.0>> -> L<<490.0,435.0>--<489.0,431.0>>
* less_hyphen_bar.liga: L<<534.0,643.0>--<477.0,375.0>> -> L<<477.0,375.0>--<466.0,321.0>>
[code: found-colinear-vectors]
The following glyphs have jaggy segments:
* m.sc: L<<432.0,0.0>--<534.0,477.0>>/L<<534.0,477.0>--<299.0,0.0>> = 14.157592127600394
* trademark (U+2122): L<<418.0,332.0>--<428.0,639.0>>/L<<428.0,639.0>--<363.0,332.0>> = 10.08883041066053
* trademark (U+2122): L<<531.0,332.0>--<596.0,639.0>>/L<<596.0,639.0>--<477.0,332.0>> = 9.232951420697566
* uni20A9 (U+20A9): L<<229.0,699.0>--<162.0,93.0>>/L<<162.0,93.0>--<360.0,699.0>> = 11.784848165590649
* uni20A9 (U+20A9): L<<319.0,0.0>--<375.0,579.0>>/L<<375.0,579.0>--<187.0,0.0>> = 12.464119629827673
* uni20A9 (U+20A9): L<<442.0,699.0>--<382.0,93.0>>/L<<382.0,93.0>--<573.0,699.0>> = 11.83946742345819
* uni2116 (U+2116): L<<164.0,0.0>--<172.0,592.0>>/L<<172.0,592.0>--<45.0,0.0>> = 11.333755455975231
* uni2116 (U+2116): L<<222.0,699.0>--<216.0,102.0>>/L<<216.0,102.0>--<344.0,699.0>> = 11.525493565128695
[code: found-jaggy-segments]
No dotted circle glyph present
[code: missing-dotted-circle]It seems that URW Design Studio is still not listed on the designers catalog. Please submit a photo and a link to a webpage where people can learn more about the work of this designer/typefoundry.
[code: profile-not-found]The following codepoints supported by the font are not covered by any subsets defined in the font's metadata file, and will never be served. You can solve this by either manually adding additional subset declarations to METADATA.pb, or by editing the glyphset definitions.
Use -F or --full-lists to disable shortening of long lists.
Or you can add the above codepoints to one of the subsets supported by the font: cyrillic-ext
, latin
, latin-ext
, menu
This font file does not have a 'meta' table.
[code: lacks-meta-table]ofl/fragmentmono
[code: family-path] * ℹ️ **INFO**ofl/fragmentmonosc
[code: family-path]This font contains the following optional tables:
- cvt
- fpgm
- loca
- prep
- GPOS
- GSUB
- gasp
[code: optional-tables]
Found a git repo URL: https://github.com/twardoch/urw-core35-fonts
[code: url-found] * ℹ️ **INFO**Found a git repo URL: https://github.com/weiweihuanghuang/fragment-mono/
[code: url-found]This font doesn't have an ARTICLE.en_us.html file.
[code: missing-article]EPAR table not present in font. To learn more see https://github.com/fonttools/fontbakery/issues/818
[code: lacks-EPAR]These are the ppm ranges declared on the gasp table:
PPM <= 65535: flag = 0x0F - Use grid-fitting - Use grayscale rendering - Use gridfitting with ClearType symmetric smoothing - Use smoothing along multiple axes with ClearType®
[code: ranges]The following glyphs lack their case-swapping counterparts:
Glyph present in the font | Missing case-swapping counterpart |
---|---|
U+039E: GREEK CAPITAL LETTER XI | U+03BE: GREEK SMALL LETTER XI |
OS/2.usWinAscent value should be equal or greater than 1022, but got 945 instead
[code: ascent] * 🔥 **FAIL**OS/2.usWinDescent value should be equal or greater than 378, but got 265 instead
[code: descent]Repository URL is https://github.com/weiweihuanghuang/fragment-mono
But: HTML description has 'github.com/twardoch/urw-core35-fonts'
[code: mismatch]GF_Latin_Core glyphset:
Language | FAIL messages |
---|---|
nl_Latn (Dutch) | Shaper didn't attach acutecomb to uni0237.sc |
^ | Shaper didn't attach acutecomb to J |
The OpenType spec recomments at https://learn.microsoft.com/en-us/typography/opentype/spec/recom#hhea-table that hhea.numberOfHMetrics be set to 3 but this font has 714 instead. Please read https://github.com/fonttools/fonttools/issues/3014 to decide whether this makes sense for your font.
[code: bad-numberOfHMetrics]This check inspects the glyph outlines and detects the total number of contours in each of them. The expected values are infered from the typical ammounts of contours observed in a large collection of reference font families. The divergences listed below may simply indicate a significantly different design on some of your glyphs. On the other hand, some of these may flag actual bugs in the font such as glyphs mapped to an incorrect codepoint. Please consider reviewing the design and codepoint assignment of these to make sure they are correct.
The following glyphs do not have the recommended number of contours:
- Glyph name: aogonek Contours detected: 3 Expected: 2
- Glyph name: eogonek Contours detected: 3 Expected: 2
- Glyph name: Uogonek Contours detected: 2 Expected: 1
- Glyph name: uogonek Contours detected: 2 Expected: 1
- Glyph name: Uogonek Contours detected: 2 Expected: 1
- Glyph name: aogonek Contours detected: 3 Expected: 2
- Glyph name: eogonek Contours detected: 3 Expected: 2
- Glyph name: uogonek Contours detected: 2 Expected: 1
[code: contour-count]
The following glyph names may be too long for some legacy systems which may expect a maximum 31-characters length limit: asciitilde_asciitilde_greater.liga, less_numbersign_hyphen_hyphen.liga and semicolon_semicolon_semicolon.liga
[code: legacy-long-names]The following glyphs have on-curve points which have potentially incorrect y coordinates:
* uni1E9E (U+1E9E): X=435.5,Y=-1.0 (should be at baseline 0?)
* uni1E9E (U+1E9E): X=260.0,Y=-1.0 (should be at baseline 0?)
* a (U+0061): X=340.0,Y=0.5 (should be at baseline 0?)
* aacute (U+00E1): X=340.0,Y=0.5 (should be at baseline 0?)
* abreve (U+0103): X=340.0,Y=0.5 (should be at baseline 0?)
* uni01CE (U+01CE): X=340.0,Y=0.5 (should be at baseline 0?)
* acircumflex (U+00E2): X=340.0,Y=0.5 (should be at baseline 0?)
* adieresis (U+00E4): X=340.0,Y=0.5 (should be at baseline 0?)
* agrave (U+00E0): X=340.0,Y=0.5 (should be at baseline 0?)
* amacron (U+0101): X=340.0,Y=0.5 (should be at baseline 0?)
* 48 more.
Use -F or --full-lists to disable shortening of long lists.
[code: found-misalignments]The following glyphs have segments which seem very short:
* AE (U+00C6) contains a short segment L<<306.0,619.0>--<302.0,619.0>>
* N (U+004E) contains a short segment L<<163.0,559.0>--<162.0,559.0>>
* N (U+004E) contains a short segment L<<455.0,135.0>--<456.0,135.0>>
* Nacute (U+0143) contains a short segment L<<163.0,559.0>--<162.0,559.0>>
* Nacute (U+0143) contains a short segment L<<455.0,135.0>--<456.0,135.0>>
* Ncaron (U+0147) contains a short segment L<<163.0,559.0>--<162.0,559.0>>
* Ncaron (U+0147) contains a short segment L<<455.0,135.0>--<456.0,135.0>>
* uni0145 (U+0145) contains a short segment L<<163.0,559.0>--<162.0,559.0>>
* uni0145 (U+0145) contains a short segment L<<455.0,135.0>--<456.0,135.0>>
* Ntilde (U+00D1) contains a short segment L<<163.0,559.0>--<162.0,559.0>>
* 77 more.
Use -F or --full-lists to disable shortening of long lists.
[code: found-short-segments]The following glyphs have jaggy segments:
* less_asciitilde_greater.liga: B<<342.0,339.0>-<328.0,331.0>-<312.0,310.0>>/L<<312.0,310.0>--<342.0,339.0>> = 8.667073653095745
* less_asciitilde_greater.liga: L<<119.0,121.0>--<284.0,283.0>>/B<<284.0,283.0>-<255.0,262.0>-<217.0,262.0>> = 8.564642314364727
* less_asciitilde_greater.liga: L<<312.0,310.0>--<342.0,339.0>>/B<<342.0,339.0>-<328.0,331.0>-<312.0,310.0>> = 14.284096771978573
* trademark (U+2122): L<<403.0,332.0>--<348.0,639.0>>/L<<348.0,639.0>--<348.0,332.0>> = 10.15696551936229
* trademark (U+2122): L<<516.0,332.0>--<516.0,639.0>>/L<<516.0,639.0>--<462.0,332.0>> = 9.976036422751434
* uni20A9 (U+20A9): L<<137.0,699.0>--<199.0,93.0>>/L<<199.0,93.0>--<268.0,699.0>> = 12.337420712236526
* uni20A9 (U+20A9): L<<350.0,699.0>--<420.0,93.0>>/L<<420.0,93.0>--<481.0,699.0>> = 12.337157115263608
* uni20A9 (U+20A9): L<<375.0,0.0>--<309.0,579.0>>/L<<309.0,579.0>--<243.0,0.0>> = 13.006111889763387
* uni2116 (U+2116): L<<129.0,699.0>--<250.0,118.0>>/L<<250.0,118.0>--<250.0,699.0>> = 11.764350807103282
* uni2116 (U+2116): L<<220.0,0.0>--<102.0,576.0>>/L<<102.0,576.0>--<102.0,0.0>> = 11.577489206021184
[code: found-jaggy-segments]
No dotted circle glyph present
[code: missing-dotted-circle]It seems that URW Design Studio is still not listed on the designers catalog. Please submit a photo and a link to a webpage where people can learn more about the work of this designer/typefoundry.
[code: profile-not-found]The following codepoints supported by the font are not covered by any subsets defined in the font's metadata file, and will never be served. You can solve this by either manually adding additional subset declarations to METADATA.pb, or by editing the glyphset definitions.
Use -F or --full-lists to disable shortening of long lists.
Or you can add the above codepoints to one of the subsets supported by the font: cyrillic-ext
, latin
, latin-ext
, menu
This font file does not have a 'meta' table.
[code: lacks-meta-table]ofl/fragmentmono
[code: family-path] * ℹ️ **INFO**ofl/fragmentmonosc
[code: family-path]This font contains the following optional tables:
- cvt
- fpgm
- loca
- prep
- GPOS
- GSUB
- gasp
[code: optional-tables]
Found a git repo URL: https://github.com/twardoch/urw-core35-fonts
[code: url-found] * ℹ️ **INFO**Found a git repo URL: https://github.com/weiweihuanghuang/fragment-mono/
[code: url-found]This font doesn't have an ARTICLE.en_us.html file.
[code: missing-article]EPAR table not present in font. To learn more see https://github.com/fonttools/fontbakery/issues/818
[code: lacks-EPAR]These are the ppm ranges declared on the gasp table:
PPM <= 65535: flag = 0x0F - Use grid-fitting - Use grayscale rendering - Use gridfitting with ClearType symmetric smoothing - Use smoothing along multiple axes with ClearType®
[code: ranges]💥 ERROR | ☠ FATAL | 🔥 FAIL | ⚠️ WARN | ⏩ SKIP | ℹ️ INFO | ✅ PASS | 🔎 DEBUG |
---|---|---|---|---|---|---|---|
0 | 0 | 8 | 22 | 122 | 17 | 309 | 0 |
0% | 0% | 2% | 5% | 26% | 4% | 65% | 0% |
Note: The following loglevels were omitted in this report:
Dont know if it's important or not, but lowercases are displayed in the menu (Indd):
In Word (Mac), we have a great menu, but we still have lowercases (like in Big Shoulder)
fontbakery version: 0.12.7
These won't break the CI job for now, but will become effective after some time if nobody raises any concern.
The following glyphs lack their case-swapping counterparts:
Glyph present in the font | Missing case-swapping counterpart |
---|---|
U+039E: GREEK CAPITAL LETTER XI | U+03BE: GREEK SMALL LETTER XI |
OS/2.usWinAscent value should be equal or greater than 1022, but got 945 instead
[code: ascent] * 🔥 **FAIL**OS/2.usWinDescent value should be equal or greater than 378, but got 265 instead
[code: descent]Repository URL is https://github.com/weiweihuanghuang/fragment-mono
But: HTML description has 'github.com/twardoch/urw-core35-fonts'
[code: mismatch]GF_Latin_Core glyphset:
Language | FAIL messages |
---|---|
nl_Latn (Dutch) | Shaper didn't attach acutecomb to uni0237.sc |
^ | Shaper didn't attach acutecomb to J |
The OpenType spec recomments at https://learn.microsoft.com/en-us/typography/opentype/spec/recom#hhea-table that hhea.numberOfHMetrics be set to 3 but this font has 714 instead. Please read https://github.com/fonttools/fonttools/issues/3014 to decide whether this makes sense for your font.
[code: bad-numberOfHMetrics]This check inspects the glyph outlines and detects the total number of contours in each of them. The expected values are infered from the typical ammounts of contours observed in a large collection of reference font families. The divergences listed below may simply indicate a significantly different design on some of your glyphs. On the other hand, some of these may flag actual bugs in the font such as glyphs mapped to an incorrect codepoint. Please consider reviewing the design and codepoint assignment of these to make sure they are correct.
The following glyphs do not have the recommended number of contours:
- Glyph name: aogonek Contours detected: 3 Expected: 2
- Glyph name: eogonek Contours detected: 3 Expected: 2
- Glyph name: Uogonek Contours detected: 2 Expected: 1
- Glyph name: uogonek Contours detected: 2 Expected: 1
- Glyph name: Uogonek Contours detected: 2 Expected: 1
- Glyph name: aogonek Contours detected: 3 Expected: 2
- Glyph name: eogonek Contours detected: 3 Expected: 2
- Glyph name: uogonek Contours detected: 2 Expected: 1
[code: contour-count]
The following glyph names may be too long for some legacy systems which may expect a maximum 31-characters length limit: asciitilde_asciitilde_greater.liga, less_numbersign_hyphen_hyphen.liga and semicolon_semicolon_semicolon.liga
[code: legacy-long-names]The following glyphs have on-curve points which have potentially incorrect y coordinates:
* a (U+0061): X=419.5,Y=2.0 (should be at baseline 0?)
* aacute (U+00E1): X=419.5,Y=2.0 (should be at baseline 0?)
* abreve (U+0103): X=419.5,Y=2.0 (should be at baseline 0?)
* uni01CE (U+01CE): X=419.5,Y=2.0 (should be at baseline 0?)
* acircumflex (U+00E2): X=419.5,Y=2.0 (should be at baseline 0?)
* adieresis (U+00E4): X=419.5,Y=2.0 (should be at baseline 0?)
* agrave (U+00E0): X=419.5,Y=2.0 (should be at baseline 0?)
* amacron (U+0101): X=419.5,Y=2.0 (should be at baseline 0?)
* amacron (U+0101): X=244.0,Y=701.0 (should be at cap-height 699?)
* amacron (U+0101): X=518.0,Y=701.0 (should be at cap-height 699?)
* 64 more.
Use -F or --full-lists to disable shortening of long lists.
[code: found-misalignments]The following glyphs have colinear vectors:
* bar_equal_greater.liga: L<<-1056.0,431.0>--<-1051.0,454.0>> -> L<<-1051.0,454.0>--<-1011.0,642.0>>
* bar_equal_greater.liga: L<<-1131.0,77.0>--<-1087.0,285.0>> -> L<<-1087.0,285.0>--<-1086.0,289.0>>
* bar_hyphen_greater.liga: L<<-1110.0,77.0>--<-1053.0,345.0>> -> L<<-1053.0,345.0>--<-1042.0,399.0>>
* eng (U+014B): L<<371.0,-37.0>--<379.0,0.0>> -> L<<379.0,0.0>--<456.0,363.0>>
* eng (U+014B): L<<542.0,376.0>--<462.0,0.0>> -> L<<462.0,0.0>--<449.0,-59.0>>
* less_equal_bar.liga: L<<459.0,289.0>--<454.0,266.0>> -> L<<454.0,266.0>--<414.0,78.0>>
* less_equal_bar.liga: L<<534.0,643.0>--<490.0,435.0>> -> L<<490.0,435.0>--<489.0,431.0>>
* less_hyphen_bar.liga: L<<534.0,643.0>--<477.0,375.0>> -> L<<477.0,375.0>--<466.0,321.0>>
[code: found-colinear-vectors]
The following glyphs have jaggy segments:
* m.sc: L<<432.0,0.0>--<534.0,477.0>>/L<<534.0,477.0>--<299.0,0.0>> = 14.157592127600394
* trademark (U+2122): L<<418.0,332.0>--<428.0,639.0>>/L<<428.0,639.0>--<363.0,332.0>> = 10.08883041066053
* trademark (U+2122): L<<531.0,332.0>--<596.0,639.0>>/L<<596.0,639.0>--<477.0,332.0>> = 9.232951420697566
* uni20A9 (U+20A9): L<<229.0,699.0>--<162.0,93.0>>/L<<162.0,93.0>--<360.0,699.0>> = 11.784848165590649
* uni20A9 (U+20A9): L<<319.0,0.0>--<375.0,579.0>>/L<<375.0,579.0>--<187.0,0.0>> = 12.464119629827673
* uni20A9 (U+20A9): L<<442.0,699.0>--<382.0,93.0>>/L<<382.0,93.0>--<573.0,699.0>> = 11.83946742345819
* uni2116 (U+2116): L<<164.0,0.0>--<172.0,592.0>>/L<<172.0,592.0>--<45.0,0.0>> = 11.333755455975231
* uni2116 (U+2116): L<<222.0,699.0>--<216.0,102.0>>/L<<216.0,102.0>--<344.0,699.0>> = 11.525493565128695
[code: found-jaggy-segments]
No dotted circle glyph present
[code: missing-dotted-circle]It seems that URW Design Studio is still not listed on the designers catalog. Please submit a photo and a link to a webpage where people can learn more about the work of this designer/typefoundry.
[code: profile-not-found]The following codepoints supported by the font are not covered by any subsets defined in the font's metadata file, and will never be served. You can solve this by either manually adding additional subset declarations to METADATA.pb, or by editing the glyphset definitions.
Use -F or --full-lists to disable shortening of long lists.
Or you can add the above codepoints to one of the subsets supported by the font: cyrillic-ext
, latin
, latin-ext
, menu
This font file does not have a 'meta' table.
[code: lacks-meta-table]ofl/fragmentmono
[code: family-path] * ℹ️ **INFO**ofl/fragmentmonosc
[code: family-path]This font contains the following optional tables:
- cvt
- fpgm
- loca
- prep
- GPOS
- GSUB
- gasp
[code: optional-tables]
Found a git repo URL: https://github.com/twardoch/urw-core35-fonts
[code: url-found] * ℹ️ **INFO**Found a git repo URL: https://github.com/weiweihuanghuang/fragment-mono/
[code: url-found]This font doesn't have an ARTICLE.en_us.html file.
[code: missing-article]EPAR table not present in font. To learn more see https://github.com/fonttools/fontbakery/issues/818
[code: lacks-EPAR]These are the ppm ranges declared on the gasp table:
PPM <= 65535: flag = 0x0F - Use grid-fitting - Use grayscale rendering - Use gridfitting with ClearType symmetric smoothing - Use smoothing along multiple axes with ClearType®
[code: ranges]The following glyphs lack their case-swapping counterparts:
Glyph present in the font | Missing case-swapping counterpart |
---|---|
U+039E: GREEK CAPITAL LETTER XI | U+03BE: GREEK SMALL LETTER XI |
OS/2.usWinAscent value should be equal or greater than 1022, but got 945 instead
[code: ascent] * 🔥 **FAIL**OS/2.usWinDescent value should be equal or greater than 378, but got 265 instead
[code: descent]Repository URL is https://github.com/weiweihuanghuang/fragment-mono
But: HTML description has 'github.com/twardoch/urw-core35-fonts'
[code: mismatch]GF_Latin_Core glyphset:
Language | FAIL messages |
---|---|
nl_Latn (Dutch) | Shaper didn't attach acutecomb to uni0237.sc |
^ | Shaper didn't attach acutecomb to J |
The OpenType spec recomments at https://learn.microsoft.com/en-us/typography/opentype/spec/recom#hhea-table that hhea.numberOfHMetrics be set to 3 but this font has 714 instead. Please read https://github.com/fonttools/fonttools/issues/3014 to decide whether this makes sense for your font.
[code: bad-numberOfHMetrics]This check inspects the glyph outlines and detects the total number of contours in each of them. The expected values are infered from the typical ammounts of contours observed in a large collection of reference font families. The divergences listed below may simply indicate a significantly different design on some of your glyphs. On the other hand, some of these may flag actual bugs in the font such as glyphs mapped to an incorrect codepoint. Please consider reviewing the design and codepoint assignment of these to make sure they are correct.
The following glyphs do not have the recommended number of contours:
- Glyph name: aogonek Contours detected: 3 Expected: 2
- Glyph name: eogonek Contours detected: 3 Expected: 2
- Glyph name: Uogonek Contours detected: 2 Expected: 1
- Glyph name: uogonek Contours detected: 2 Expected: 1
- Glyph name: Uogonek Contours detected: 2 Expected: 1
- Glyph name: aogonek Contours detected: 3 Expected: 2
- Glyph name: eogonek Contours detected: 3 Expected: 2
- Glyph name: uogonek Contours detected: 2 Expected: 1
[code: contour-count]
The following glyph names may be too long for some legacy systems which may expect a maximum 31-characters length limit: asciitilde_asciitilde_greater.liga, less_numbersign_hyphen_hyphen.liga and semicolon_semicolon_semicolon.liga
[code: legacy-long-names]The following glyphs have on-curve points which have potentially incorrect y coordinates:
* uni1E9E (U+1E9E): X=435.5,Y=-1.0 (should be at baseline 0?)
* uni1E9E (U+1E9E): X=260.0,Y=-1.0 (should be at baseline 0?)
* a (U+0061): X=340.0,Y=0.5 (should be at baseline 0?)
* aacute (U+00E1): X=340.0,Y=0.5 (should be at baseline 0?)
* abreve (U+0103): X=340.0,Y=0.5 (should be at baseline 0?)
* uni01CE (U+01CE): X=340.0,Y=0.5 (should be at baseline 0?)
* acircumflex (U+00E2): X=340.0,Y=0.5 (should be at baseline 0?)
* adieresis (U+00E4): X=340.0,Y=0.5 (should be at baseline 0?)
* agrave (U+00E0): X=340.0,Y=0.5 (should be at baseline 0?)
* amacron (U+0101): X=340.0,Y=0.5 (should be at baseline 0?)
* 48 more.
Use -F or --full-lists to disable shortening of long lists.
[code: found-misalignments]The following glyphs have segments which seem very short:
* AE (U+00C6) contains a short segment L<<306.0,619.0>--<302.0,619.0>>
* N (U+004E) contains a short segment L<<163.0,559.0>--<162.0,559.0>>
* N (U+004E) contains a short segment L<<455.0,135.0>--<456.0,135.0>>
* Nacute (U+0143) contains a short segment L<<163.0,559.0>--<162.0,559.0>>
* Nacute (U+0143) contains a short segment L<<455.0,135.0>--<456.0,135.0>>
* Ncaron (U+0147) contains a short segment L<<163.0,559.0>--<162.0,559.0>>
* Ncaron (U+0147) contains a short segment L<<455.0,135.0>--<456.0,135.0>>
* uni0145 (U+0145) contains a short segment L<<163.0,559.0>--<162.0,559.0>>
* uni0145 (U+0145) contains a short segment L<<455.0,135.0>--<456.0,135.0>>
* Ntilde (U+00D1) contains a short segment L<<163.0,559.0>--<162.0,559.0>>
* 77 more.
Use -F or --full-lists to disable shortening of long lists.
[code: found-short-segments]The following glyphs have jaggy segments:
* less_asciitilde_greater.liga: B<<342.0,339.0>-<328.0,331.0>-<312.0,310.0>>/L<<312.0,310.0>--<342.0,339.0>> = 8.667073653095745
* less_asciitilde_greater.liga: L<<119.0,121.0>--<284.0,283.0>>/B<<284.0,283.0>-<255.0,262.0>-<217.0,262.0>> = 8.564642314364727
* less_asciitilde_greater.liga: L<<312.0,310.0>--<342.0,339.0>>/B<<342.0,339.0>-<328.0,331.0>-<312.0,310.0>> = 14.284096771978573
* trademark (U+2122): L<<403.0,332.0>--<348.0,639.0>>/L<<348.0,639.0>--<348.0,332.0>> = 10.15696551936229
* trademark (U+2122): L<<516.0,332.0>--<516.0,639.0>>/L<<516.0,639.0>--<462.0,332.0>> = 9.976036422751434
* uni20A9 (U+20A9): L<<137.0,699.0>--<199.0,93.0>>/L<<199.0,93.0>--<268.0,699.0>> = 12.337420712236526
* uni20A9 (U+20A9): L<<350.0,699.0>--<420.0,93.0>>/L<<420.0,93.0>--<481.0,699.0>> = 12.337157115263608
* uni20A9 (U+20A9): L<<375.0,0.0>--<309.0,579.0>>/L<<309.0,579.0>--<243.0,0.0>> = 13.006111889763387
* uni2116 (U+2116): L<<129.0,699.0>--<250.0,118.0>>/L<<250.0,118.0>--<250.0,699.0>> = 11.764350807103282
* uni2116 (U+2116): L<<220.0,0.0>--<102.0,576.0>>/L<<102.0,576.0>--<102.0,0.0>> = 11.577489206021184
[code: found-jaggy-segments]
No dotted circle glyph present
[code: missing-dotted-circle]It seems that URW Design Studio is still not listed on the designers catalog. Please submit a photo and a link to a webpage where people can learn more about the work of this designer/typefoundry.
[code: profile-not-found]The following codepoints supported by the font are not covered by any subsets defined in the font's metadata file, and will never be served. You can solve this by either manually adding additional subset declarations to METADATA.pb, or by editing the glyphset definitions.
Use -F or --full-lists to disable shortening of long lists.
Or you can add the above codepoints to one of the subsets supported by the font: cyrillic-ext
, latin
, latin-ext
, menu
This font file does not have a 'meta' table.
[code: lacks-meta-table]ofl/fragmentmono
[code: family-path] * ℹ️ **INFO**ofl/fragmentmonosc
[code: family-path]This font contains the following optional tables:
- cvt
- fpgm
- loca
- prep
- GPOS
- GSUB
- gasp
[code: optional-tables]
Found a git repo URL: https://github.com/twardoch/urw-core35-fonts
[code: url-found] * ℹ️ **INFO**Found a git repo URL: https://github.com/weiweihuanghuang/fragment-mono/
[code: url-found]This font doesn't have an ARTICLE.en_us.html file.
[code: missing-article]EPAR table not present in font. To learn more see https://github.com/fonttools/fontbakery/issues/818
[code: lacks-EPAR]These are the ppm ranges declared on the gasp table:
PPM <= 65535: flag = 0x0F - Use grid-fitting - Use grayscale rendering - Use gridfitting with ClearType symmetric smoothing - Use smoothing along multiple axes with ClearType®
[code: ranges]💥 ERROR | ☠ FATAL | 🔥 FAIL | ⚠️ WARN | ⏩ SKIP | ℹ️ INFO | ✅ PASS | 🔎 DEBUG |
---|---|---|---|---|---|---|---|
0 | 0 | 8 | 22 | 122 | 17 | 309 | 0 |
0% | 0% | 2% | 5% | 26% | 4% | 65% | 0% |
Note: The following loglevels were omitted in this report:
Taken from the upstream repo https://github.com/weiweihuanghuang/fragment-mono at commit https://github.com/weiweihuanghuang/fragment-mono/commit/766d60703081ca3581e17764b36e8487c7ba6225.
PR Checklist: