Closed simoncozens closed 1 week ago
fontbakery version: 0.12.7
These won't break the CI job for now, but will become effective after some time if nobody raises any concern.
The following glyph names do not comply with naming conventions: danda-deva
A glyph name must be entirely comprised of characters from the following set: A-Z a-z 0-9 .(period) (underscore). A glyph name must not start with a digit or period. There are a few exceptions such as the special glyph ".notdef". The glyph names "twocents", "a1", and "" are all valid, while "2cents" and ".twocents" are not.
[code: found-invalid-names]This is a Noto font but it lacks an ARTICLE.en_us.html file.
[code: missing-article]The following spacing glyphs may be in the GDEF mark glyph class by mistake: uni1921 (U+1921), uni1929 (U+1929) and uni192B (U+192B)
[code: spacing-mark-glyphs]The following non-mark characters should not be in the GDEF mark glyph class: U+1929, U+192A and U+192B
[code: non-mark-chars]This check inspects the glyph outlines and detects the total number of contours in each of them. The expected values are infered from the typical ammounts of contours observed in a large collection of reference font families. The divergences listed below may simply indicate a significantly different design on some of your glyphs. On the other hand, some of these may flag actual bugs in the font such as glyphs mapped to an incorrect codepoint. Please consider reviewing the design and codepoint assignment of these to make sure they are correct.
The following glyphs do not have the recommended number of contours:
- Glyph name: aogonek Contours detected: 3 Expected: 2
- Glyph name: uogonek Contours detected: 2 Expected: 1
- Glyph name: aogonek Contours detected: 3 Expected: 2
- Glyph name: uogonek Contours detected: 2 Expected: 1
[code: contour-count]
The most common width is 572 among a set of 6 math glyphs. The following math glyphs have a different width, though:
Width = 322: minus
[code: width-outliers]The following glyphs have segments which seem very short:
* uni1903 (U+1903) contains a short segment L<<146.0,358.0>--<155.0,358.0>>
* uni1905 (U+1905) contains a short segment B<<402.0,324.0>-<392.0,324.0>-<382.0,323.0>>
* uni1906 (U+1906) contains a short segment B<<252.0,159.0>-<252.0,156.0>-<251.0,149.0>>
* uni1906 (U+1906) contains a short segment B<<251.0,149.0>-<250.0,142.0>-<250.0,139.0>>
* uni1907 (U+1907) contains a short segment L<<428.0,386.0>--<426.0,366.0>>
* uni1907 (U+1907) contains a short segment L<<245.0,192.0>--<248.0,212.0>>
* uni1917 (U+1917) contains a short segment B<<108.0,493.0>-<107.0,484.0>-<106.5,475.5>>
* uni1917 (U+1917) contains a short segment B<<106.5,475.5>-<106.0,467.0>-<106.0,459.0>>
* uni194A (U+194A) contains a short segment L<<26.0,-5.0>--<23.0,1.0>>
* uni194A (U+194A) contains a short segment L<<468.0,580.0>--<474.0,573.0>>
* 69 more.
Use -F or --full-lists to disable shortening of long lists.
[code: found-short-segments]The dot of soft dotted characters used in orthographies must disappear in the following strings: į̀ į́ į̂ į̃ į̄ į̌
The dot of soft dotted characters should disappear in other cases, for example: į̆ į̇ į̈ į̊ į̋ į̦̀ į̦́ į̦̂ į̦̃ į̦̄ į̦̆ į̦̇ į̦̈ į̦̊ į̦̋ į̦̌ į̧̀ į̧́ į̧̂ į̧̃
Your font fully covers the following languages that require the soft-dotted feature: Dutch (Latn, 31,709,104 speakers), Lithuanian (Latn, 2,357,094 speakers).
Your font does not cover the following languages that require the soft-dotted feature: Aghem (Latn, 38,843 speakers), Fur (Latn, 1,230,163 speakers), Mundani (Latn, 34,000 speakers), Nzakara (Latn, 50,000 speakers), Mango (Latn, 77,000 speakers), Zapotec (Latn, 490,000 speakers), Gulay (Latn, 250,478 speakers), Basaa (Latn, 332,940 speakers), Ngbaka (Latn, 1,020,000 speakers), Belarusian (Cyrl, 10,064,517 speakers), Nateni (Latn, 100,000 speakers), Ijo, Southeast (Latn, 2,471,000 speakers), Yala (Latn, 200,000 speakers), Makaa (Latn, 221,000 speakers), Sar (Latn, 500,000 speakers), Koonzime (Latn, 40,000 speakers), Dii (Latn, 71,000 speakers), Ukrainian (Cyrl, 29,273,587 speakers), Cicipu (Latn, 44,000 speakers), Bete-Bendi (Latn, 100,000 speakers), Ma’di (Latn, 584,000 speakers), Ejagham (Latn, 120,000 speakers), South Central Banda (Latn, 244,000 speakers), Navajo (Latn, 166,319 speakers), Kom (Latn, 360,685 speakers), Mfumte (Latn, 79,000 speakers), Vute (Latn, 21,000 speakers), Dan (Latn, 1,099,244 speakers), Igbo (Latn, 27,823,640 speakers), Southern Kisi (Latn, 360,000 speakers), Avokaya (Latn, 100,000 speakers), Bafut (Latn, 158,146 speakers), Ekpeye (Latn, 226,000 speakers), Kpelle, Guinea (Latn, 622,000 speakers), Lugbara (Latn, 2,200,000 speakers), Ebira (Latn, 2,200,000 speakers).
[code: soft-dotted]Aparently there's no sample strings for 'sa_Limb' in the gflanguages package.
[code: no-sample-string]The following codepoints supported by the font are not covered by any subsets defined in the font's metadata file, and will never be served. You can solve this by either manually adding additional subset declarations to METADATA.pb, or by editing the glyphset definitions.
Use -F or --full-lists to disable shortening of long lists.
Or you can add the above codepoints to one of the subsets supported by the font: latin
, latin-ext
, limbu
, menu
The DESCRIPTION.en_us.html file in this family has not changed in comparison to the latest font release on the google/fonts github repo. Please consider mentioning note-worthy improvements made to the family recently.
[code: description-not-updated]This font file does not have a 'meta' table.
[code: lacks-meta-table]This font contains the following optional tables:
- cvt
- fpgm
- loca
- prep
- GPOS
- GSUB
- gasp
[code: optional-tables]
EPAR table not present in font. To learn more see https://github.com/fonttools/fontbakery/issues/818
[code: lacks-EPAR]These are the ppm ranges declared on the gasp table:
PPM <= 65535: flag = 0x0F - Use grid-fitting - Use grayscale rendering - Use gridfitting with ClearType symmetric smoothing - Use smoothing along multiple axes with ClearType®
[code: ranges]💥 ERROR | ☠ FATAL | 🔥 FAIL | ⚠️ WARN | ⏩ SKIP | ℹ️ INFO | ✅ PASS | 🔎 DEBUG |
---|---|---|---|---|---|---|---|
0 | 0 | 2 | 11 | 64 | 7 | 164 | 0 |
0% | 0% | 1% | 4% | 26% | 3% | 66% | 0% |
Note: The following loglevels were omitted in this report:
This release:
* Anchors vowels to base consonants after medial consonants (#1)
* Avoids overlaps with the vowel sign I (#2)
@simoncozens This should have an article right? 🔥 FAIL Check for presence of an ARTICLE.en_us.html file
fontbakery version: 0.12.7
These won't break the CI job for now, but will become effective after some time if nobody raises any concern.
The following glyph names do not comply with naming conventions: danda-deva
A glyph name must be entirely comprised of characters from the following set: A-Z a-z 0-9 .(period) (underscore). A glyph name must not start with a digit or period. There are a few exceptions such as the special glyph ".notdef". The glyph names "twocents", "a1", and "" are all valid, while "2cents" and ".twocents" are not.
[code: found-invalid-names]The following links are broken in the farticle file: https://scriptsource.org/scr/Limb (status code: 403)
[code: broken-links]The following spacing glyphs may be in the GDEF mark glyph class by mistake: uni1921 (U+1921), uni1929 (U+1929) and uni192B (U+192B)
[code: spacing-mark-glyphs]The following non-mark characters should not be in the GDEF mark glyph class: U+1929, U+192A and U+192B
[code: non-mark-chars]This check inspects the glyph outlines and detects the total number of contours in each of them. The expected values are infered from the typical ammounts of contours observed in a large collection of reference font families. The divergences listed below may simply indicate a significantly different design on some of your glyphs. On the other hand, some of these may flag actual bugs in the font such as glyphs mapped to an incorrect codepoint. Please consider reviewing the design and codepoint assignment of these to make sure they are correct.
The following glyphs do not have the recommended number of contours:
- Glyph name: aogonek Contours detected: 3 Expected: 2
- Glyph name: uogonek Contours detected: 2 Expected: 1
- Glyph name: aogonek Contours detected: 3 Expected: 2
- Glyph name: uogonek Contours detected: 2 Expected: 1
[code: contour-count]
The most common width is 572 among a set of 6 math glyphs. The following math glyphs have a different width, though:
Width = 322: minus
[code: width-outliers]The following glyphs have segments which seem very short:
* uni1903 (U+1903) contains a short segment L<<146.0,358.0>--<155.0,358.0>>
* uni1905 (U+1905) contains a short segment B<<402.0,324.0>-<392.0,324.0>-<382.0,323.0>>
* uni1906 (U+1906) contains a short segment B<<252.0,159.0>-<252.0,156.0>-<251.0,149.0>>
* uni1906 (U+1906) contains a short segment B<<251.0,149.0>-<250.0,142.0>-<250.0,139.0>>
* uni1907 (U+1907) contains a short segment L<<428.0,386.0>--<426.0,366.0>>
* uni1907 (U+1907) contains a short segment L<<245.0,192.0>--<248.0,212.0>>
* uni1917 (U+1917) contains a short segment B<<108.0,493.0>-<107.0,484.0>-<106.5,475.5>>
* uni1917 (U+1917) contains a short segment B<<106.5,475.5>-<106.0,467.0>-<106.0,459.0>>
* uni194A (U+194A) contains a short segment L<<26.0,-5.0>--<23.0,1.0>>
* uni194A (U+194A) contains a short segment L<<468.0,580.0>--<474.0,573.0>>
* 69 more.
Use -F or --full-lists to disable shortening of long lists.
[code: found-short-segments]The dot of soft dotted characters used in orthographies must disappear in the following strings: į̀ į́ į̂ į̃ į̄ į̌
The dot of soft dotted characters should disappear in other cases, for example: į̆ į̇ į̈ į̊ į̋ į̦̀ į̦́ į̦̂ į̦̃ į̦̄ į̦̆ į̦̇ į̦̈ į̦̊ į̦̋ į̦̌ į̧̀ į̧́ į̧̂ į̧̃
Your font fully covers the following languages that require the soft-dotted feature: Dutch (Latn, 31,709,104 speakers), Lithuanian (Latn, 2,357,094 speakers).
Your font does not cover the following languages that require the soft-dotted feature: Ijo, Southeast (Latn, 2,471,000 speakers), Navajo (Latn, 166,319 speakers), Koonzime (Latn, 40,000 speakers), Cicipu (Latn, 44,000 speakers), Belarusian (Cyrl, 10,064,517 speakers), Dan (Latn, 1,099,244 speakers), Lugbara (Latn, 2,200,000 speakers), Kom (Latn, 360,685 speakers), Gulay (Latn, 250,478 speakers), Bafut (Latn, 158,146 speakers), Ekpeye (Latn, 226,000 speakers), Yala (Latn, 200,000 speakers), Bete-Bendi (Latn, 100,000 speakers), Kpelle, Guinea (Latn, 622,000 speakers), Vute (Latn, 21,000 speakers), Zapotec (Latn, 490,000 speakers), Mundani (Latn, 34,000 speakers), Makaa (Latn, 221,000 speakers), Aghem (Latn, 38,843 speakers), Basaa (Latn, 332,940 speakers), South Central Banda (Latn, 244,000 speakers), Nzakara (Latn, 50,000 speakers), Ejagham (Latn, 120,000 speakers), Dii (Latn, 71,000 speakers), Avokaya (Latn, 100,000 speakers), Fur (Latn, 1,230,163 speakers), Ngbaka (Latn, 1,020,000 speakers), Ma’di (Latn, 584,000 speakers), Mfumte (Latn, 79,000 speakers), Southern Kisi (Latn, 360,000 speakers), Sar (Latn, 500,000 speakers), Mango (Latn, 77,000 speakers), Ukrainian (Cyrl, 29,273,587 speakers), Nateni (Latn, 100,000 speakers), Igbo (Latn, 27,823,640 speakers), Ebira (Latn, 2,200,000 speakers).
[code: soft-dotted]Aparently there's no sample strings for 'sa_Limb' in the gflanguages package.
[code: no-sample-string]The following codepoints supported by the font are not covered by any subsets defined in the font's metadata file, and will never be served. You can solve this by either manually adding additional subset declarations to METADATA.pb, or by editing the glyphset definitions.
Use -F or --full-lists to disable shortening of long lists.
Or you can add the above codepoints to one of the subsets supported by the font: latin
, latin-ext
, limbu
, menu
The DESCRIPTION.en_us.html file in this family has not changed in comparison to the latest font release on the google/fonts github repo. Please consider mentioning note-worthy improvements made to the family recently.
[code: description-not-updated]This font file does not have a 'meta' table.
[code: lacks-meta-table]This font contains the following optional tables:
- cvt
- fpgm
- loca
- prep
- GPOS
- GSUB
- gasp
[code: optional-tables]
EPAR table not present in font. To learn more see https://github.com/fonttools/fontbakery/issues/818
[code: lacks-EPAR]These are the ppm ranges declared on the gasp table:
PPM <= 65535: flag = 0x0F - Use grid-fitting - Use grayscale rendering - Use gridfitting with ClearType symmetric smoothing - Use smoothing along multiple axes with ClearType®
[code: ranges]💥 ERROR | ☠ FATAL | 🔥 FAIL | ⚠️ WARN | ⏩ SKIP | ℹ️ INFO | ✅ PASS | 🔎 DEBUG |
---|---|---|---|---|---|---|---|
0 | 0 | 2 | 11 | 64 | 7 | 164 | 0 |
0% | 0% | 1% | 4% | 26% | 3% | 66% | 0% |
Note: The following loglevels were omitted in this report:
Taken from the upstream repo https://github.com/notofonts/limbu at commit https://github.com/notofonts/limbu/commit/912b8113bbabaf7322956fe80a0ad18575e77d7e.
PR Checklist: