search

gopro / labs

GoPro Labs
Apache License 2.0
483 stars 40 forks source link

QR Control Bug? GP 11 record stops after about 1 minute #408

Closed stpfl123 closed 1 year ago

stpfl123 commented 1 year ago

[HERO11 Black]v2.10.70 QRControl 1.8.3

After updating my 2x Gopro 11 to Goprolabs 2.10.70 and using QRControl 1.8.3 i am getting a bug after several QRControl commands. Then camera will stop record after 1 minute. The problem is with two cameras and different micro sd cards. Standard High Bitrate Setting. When i make a Hard Reset on Gopro the bug is gone but will come back aggain after several QRControl commads ?

dnewman-gpsw commented 1 year ago

What commands? Some will cause that by design. I do not expect there is a bug.

stpfl123 commented 1 year ago

Wake up when power ISO and Shutter Display on Front Display Standard / 4k 8x7 / 50p / Wide / 10bit / High Bitrate / 4000K / Iso min 100 / iso max 800 / Sharpness Low / Colour Flat/ nothing else

stpfl123 commented 1 year ago

What commands? Some will cause that by design. I do not expect there is a bug.

which commands ?

stpfl123 commented 1 year ago

first time a had this problem was on June 4th then full reset working for about 20 flights now today problem came back... Last half year no problems, same settings same problem on two cameras with differnt SD cards. last update QRcontrol 27.05.2023 ?

dnewman-gpsw commented 1 year ago

Please share the actually command string, or QR Code that causes it.

dnewman-gpsw commented 1 year ago

Is it exactly one minute?

dnewman-gpsw commented 1 year ago

Also a metadata extraction using https://gopro.github.io/labs/control/metadata/ for one of the failed captures.

stpfl123 commented 1 year ago

Is it exactly one minute?

1 minute 4 seconds

stpfl123 commented 1 year ago

Please share the actually command string, or QR Code that causes it.

DEVC DVID 1 DVNM Global Settings VERS 8, 2, 2 FMWR H22.01.02.10.70 LINF LSU2060701401266 CINF 104, 183, 23, 207, 14, 96, 189, 59, 223, 183, 213, 102, 224, 60, 34, 79 CASN C3471325066261 MINF HERO11 Black MUID 3474437992, 1002266638, 1725282271, 1327643872, 0, 0, 0, 0 CMOD 12 MTYP 0 OREN U DZOM Y DZST 0 SMTR N PRTN Y PTWB 4000K PTSH LOW PTCL FLAT EXPT AUTO PIMX 800 PIMN 100 PTEV 0.0 RATE .empty. SROT 16.0000 EISE N EISA N/A HCTL Off AUPT N APTO OFF AUDO AUTO BROD .empty. BRID 0 PVUL F PRJT GPRO SOFF 0 CLKS 1 CDAT 0x00000000639F9C17 SCTM 0 PRNA 1 PRNU 0 SCAP N CDTM 0 DUST NO_LIMIT VRES 3840, 3360 VFPS 50000, 1000 HSGT OFF BITR HIGH MMOD STEREO RAMP .empty. TZON 32767 CLKC 0 DZMX 1.4000 CTRL Pro PWPR PERFORMANCE ORDP Y CLDP Y PIMD MANUAL DEVC DVID FOVL DVNM Large FOV ABSC 0.0000 ZFOV 156.7126 VFOV W MXCF x1 MAPX 1.0000 MYCF y1 MAPY 1.0000 PYCF r0r1r2r3r4r5r6 POLY 0.0000, 2.1112, 0.1433, -1.0301, 0.6410, -0.0000, 0.0000 ZMPL 0.7115 ARUW 1.1429 ARWA 1.1429 DEVC DVID USRM DVNM User Metadata STRM WAKE 2 FRNT 1 EXPS 1 EXPX 60 USRD 1 DEVC DVID HLMT DVNM Highlights

dnewman-gpsw commented 1 year ago

You haven't shared the command yet, and you are running more that you said. You have exposure max EXPX set at 60, WAKE=2, and display the ISO/Shutter on the FRNT display. While this aren't the cause either, all my naked cameras are configured similarly. So I guessing this is a naked config? Naked is more unreliable, do you have sufficient cooling? Also I'm surprised as an FPV user you aren't using BITR to increase the bitrate. While this might be counterintuitive !MBITR=150 might help. The bitrate hack includes some enhanced monitoring of the SD Card performance, so it might help.

As this is not a bug in general, I moving this to discussions.