File Corrupted when using 5.3K 50fps

[tetrahydra]

Hello,

These are my settings

BITR=190
DLRV=1
NR01=1
EXPX=200
EXPS=1
WIDE=1
LOGB=400
BASE=GoPro11_[yyyy-mm-dd_HH.MM.SS]_
LEVL=1

Additional settings ISO 100-400 Linear + HL

When using QuikCapture, some of the recorded videos were corrupted. But when turned the camera on, and then press the record button, all the videos are ok, so far.

I repeated this several times, and it happens:

1. When the camera has not been used for longer than 6 hours.
2. Subsequent QuikCapture in a quick successive press. Less than 30 seconds in between the end and start.

[dnewman-gpsw]

Likely not a bug, you are running the bitrate 70 mbs higher than the camera is tested. Try at 170

[tetrahydra]

Will post an update once i have it tested again on Monday (July 24).

[dnewman-gpsw]

NR01=1 also increases processing demands for compression. So there no guarantee for bitrates above stock. Low fps is easier to overclock than higher fps.

[tetrahydra]

Here comes the update. You are right, after I lowered the bitrate to 170mbps, there were no more corrupted video files.