Open enricog94 opened 1 year ago
Does this happen if you start gphoto, or even when you only connect it?
if it happens when you start gphoto2, can you attach a debugtrace?
libgphoto2 is not intentionally enabling liveview if you just connect or run non-capture commands.
Hello Marcus, Thank you for your fast reply.
I can give you more detail. Gphoto2 is running behind this project (photobooth project https://github.com/PhotoboothProject/photobooth). Gphoto2 is installed on a debian11 machine.
Actually when I connect the cable, camera goes immediately in liveview mode. When I take picture in goes back to normal mode and after 5-10 second it goes back to liveview mode.
Can you help me with debug trace?
Thank you Enrico
Il giorno dom 7 mag 2023 alle ore 13:54 Marcus Meissner < @.***> ha scritto:
Does this happen if you start gphoto, or even when you only connect it?
if it happens when you start gphoto2, can you attach a debugtrace?
libgphoto2 is not intentionally enabling liveview if you just connect or run non-capture commands.
— Reply to this email directly, view it on GitHub https://github.com/gphoto/gphoto2/issues/577#issuecomment-1537421431, or unsubscribe https://github.com/notifications/unsubscribe-auth/ANKLMOGSPAP6RE5V52DPMKDXE6EQPANCNFSM6AAAAAAXYWL65A . You are receiving this because you authored the thread.Message ID: @.***>
-- Enrico Gamba E-mail: @.*** Ph.: +39 342 7913087
I checked the source code, and it currently looks like it takes a picture on startup for some chroma keying purposes.
Also I think photobooth does preview enabling on purpose when you plug it in. Either way, I think it is more caused by photobooth switching on preview mode.
Thank you again for fast reply, I will take a quick look to photobooth code with photobooth people.
In case I will make a quick test on installing only gphoto 2 in the way to exclude that from causing live view.
Thank you again for your amazing work on this project and thank you for your time!
Enrico
Il giorno lun 8 mag 2023 alle ore 11:29 Marcus Meissner < @.***> ha scritto:
I checked the source code, and it currently looks like it takes a picture on startup for some chroma keying purposes.
Also I think photobooth does preview enabling on purpose when you plug it in. Either way, I think it is more caused by photobooth switching on preview mode.
— Reply to this email directly, view it on GitHub https://github.com/gphoto/gphoto2/issues/577#issuecomment-1538053650, or unsubscribe https://github.com/notifications/unsubscribe-auth/ANKLMOG7YVJF554ZP22QBGTXFC4IHANCNFSM6AAAAAAXYWL65A . You are receiving this because you authored the thread.Message ID: @.***>
-- Enrico Gamba E-mail: @.*** Ph.: +39 342 7913087
I'm encountering this kind of issue. As soon as i connect NIKON camera to gphoto2 it goes to live view. I woould like to keek liveview of to not overuse the sensor of camera.
There is any settings that I'm doing wrong?
Camera: NIKON D3500
libgphoto2 and gphoto2 version - last version
Thank you.