csete
commented
7 years ago Some sample rate and bandwidth settings cause the program to crash. Use either 0 MHz or 60 MHz, the latter for HF. There are more tips and tricks on the forum.
If you have more question or problems please either use the gqrx mailing list or the myriadrf forum (for limesdr) and keep github for development work, thanks.
I've compiled SoapySDR, LimeSuiteGUI and gqrx on a Kali Linux (Lenovo laptop)
I had a coupple of issuses getting it to complie. I finally got it to compile, gqrx finds the LimeSDR-USB, but it crashes during start with the output below.
Any suggestions?
Thanks!
gr-osmosdr v0.1.4-77-g2a2236cc (0.1.5git) gnuradio 3.7.10 built-in source types: file fcd rtl_tcp rfspace soapy redpitaya Resampling audio 96000 -> 48000 BookmarksFile is /root/.config/gqrx/bookmarks.csv gr-osmosdr v0.1.4-77-g2a2236cc (0.1.5git) gnuradio 3.7.10 built-in source types: file fcd rtl_tcp rfspace soapy redpitaya [INFO] Make connection: 'LimeSDR-USB [USB 2.0] 9060B00472922' Estimated reference clock 30,7196 MHz Selected reference clock 30,720 MHz [INFO] Device name: LimeSDR-USB [INFO] Reference: 30,72 MHz [INFO] Init LMS7002M(0) LMS7002M values cache at /root/.limesuite/LMS7002M_cache_values.db [INFO] Ver=7, Rev=1, Mask=1 [INFO] LMS7002M calibration values caching Enable [INFO] SoapyLMS7::setFrequency(Rx, 0, BB, 0 MHz) [INFO] SoapyLMS7::setFrequency(Tx, 0, BB, 0 MHz) [INFO] SoapyLMS7::setAntenna(Rx, 0, LNAL) [INFO] SoapyLMS7::setAntenna(Tx, 0, BAND1) [INFO] SoapyLMS7::setGain(Rx, 0, PGA, 0 dB) [INFO] SoapyLMS7::setGain(Rx, 0, LNA, 0 dB) [INFO] SoapyLMS7::setGain(Rx, 0, TIA, 0 dB) [INFO] SoapyLMS7::setGain(Tx, 0, PAD, -50 dB) [INFO] SoapyLMS7::setSampleRate(Rx, 0, 10 MHz), CGEN=80 MHz, ADC=20 MHz, decim=2 ConnectionSTREAM::ConfigureFPGA_PLL(tx=20MHz, rx=10MHz) [INFO] SoapyLMS7::setSampleRate(Tx, 0, 10 MHz), CGEN=80 MHz, DAC=20 MHz, interp=2 ConnectionSTREAM::ConfigureFPGA_PLL(tx=10MHz, rx=10MHz) [INFO] SoapyLMS7::setBandwidth(Rx, 0, 30 MHz) [INFO] Rx Filter calibrated from cache [INFO] SoapyLMS7::setBandwidth(Tx, 0, 30 MHz) [INFO] Tx Filter calibrated from cache [INFO] SoapyLMS7::setFrequency(Rx, 1, BB, 0 MHz) [INFO] SoapyLMS7::setFrequency(Tx, 1, BB, 0 MHz) [INFO] SoapyLMS7::setAntenna(Rx, 1, LNAL) [INFO] SoapyLMS7::setAntenna(Tx, 1, BAND1) [INFO] SoapyLMS7::setGain(Rx, 1, PGA, 0 dB) [INFO] SoapyLMS7::setGain(Rx, 1, LNA, 0 dB) [INFO] SoapyLMS7::setGain(Rx, 1, TIA, 0 dB) [INFO] SoapyLMS7::setGain(Tx, 1, PAD, -50 dB) [INFO] SoapyLMS7::setSampleRate(Rx, 1, 10 MHz), CGEN=80 MHz, ADC=20 MHz, decim=2 ConnectionSTREAM::ConfigureFPGA_PLL(tx=20MHz, rx=10MHz) [INFO] SoapyLMS7::setSampleRate(Tx, 1, 10 MHz), CGEN=80 MHz, DAC=20 MHz, interp=2 ConnectionSTREAM::ConfigureFPGA_PLL(tx=10MHz, rx=10MHz) [INFO] SoapyLMS7::setBandwidth(Rx, 1, 30 MHz) [INFO] Rx Filter calibrated from cache [INFO] SoapyLMS7::setBandwidth(Tx, 1, 30 MHz) [INFO] Tx Filter calibrated from cache
FATAL: destination port 1 out of range for source_impl(47)
Trying to fill up 18446744073709551615 missing channel(s) with null source(s). This is being done to prevent the application from crashing due to gnuradio bug #528.
terminate called after throwing an instance of 'std::invalid_argument' what(): destination port 2 out of range for source_impl(47) Avbruten (SIGABRT)