Closed yurivict closed 6 years ago
Your SDR device is probably broken. Please use the mailing list for user support, thanks. http://gqrx.dk/user-support
I don't use a device. I use the new SpyServer support in https://github.com/racerxdl/gr-osmosdr
That's experimental at best. I barely had 5 minutes to test it. Anyway, the server is probably locked to not allow changing the hardware frequency.
Most likely that experimental project is still unstable, that's why, because all servers can't be locked.
That's weird. Here it works just fine (only if I lock the server, then it doesnt change).
Can you provide a server address that you find the issue?
host=airspy.com,port=5557,spyserver=0
Why does it show ip=127.0.0.1 for you? Do you use a proxy?
With host=airspy.com,port=5557,spyserver=0
This server only streams from 6.9MHz~ to 7.720MHz~ so anything outside range will be empty.
PS: My picture showed localhost because the server is on my machine.
The limit on my video is not the limit of the station.
Its upper limit is 7.654MHz.
I change the frequency. The numbers on the scale change but the spectrum itself doesn't move. So if there was some radiostation, after the move it is obviously misplaced. Same with the 'Frequency' spin control. It changes the numbers, but doesn't move the spectrum.
In the end, it isn't clear what frequency the radiostation is on.
2.11.5 on FreeBSD.