Issue with 10.14 and Crypt

jeff1649 commented 5 years ago

Hello,

I am new to Crypt and we have just done an upgrade of a Mac from 10.12 to 10.14 to test. One issue I have run into, is after the upgrade, the machines sit at a loading screen upon restart for a very long time (45min to sometimes hours and even in safe mode).

I initially removed all products I could off the machine to verify what might be impacting this. Upon building a new machine with 10.14, I had just installed Crypt and once it prompted for the login (initial crypt login) It would then go to the loading screen where it would take forever to get into the machine.

What might be the best way to remove Crypt from the machine? Is Crypt 2 what i should be using for 10.14?

Has anyone by chance seen this same behavior?

Any help is most appreciated.

Thanks in advance,

jeff

weswhet commented 5 years ago

@jeff1649 Which version exactly of crypt are you using?

grahamgilbert commented 5 years ago

Crypt 3.3.0 is the current release. Crypt 2 was released 18 months ago.

jeff1649 commented 5 years ago

@weswhet What is the best way to find that info?

weswhet commented 5 years ago

finder show should the version for /Library/Security/SecurityAgentPlugins/Crypt.bundle

weswhet commented 5 years ago

also look at what version you are deploying.

jeff1649 commented 5 years ago

Sorry for the delay in response.

I am not seeing the file in the location provided (even after showing all files). By looking in Munki Admin, it looks like the Crypt agent is very old. Version 0.6. There is also a CryptLoginHook, version 1.0.

Where can I find the current release of 3.3.0?

grahamgilbert commented 5 years ago

https://github.com/grahamgilbert/crypt/releases

Closing this as crypt 0.6 has been deprecated for several years and definitely untested since at least 10.10ish.

Please drop by #crypt on MacAdmins.org slack if you have issues upgrading.

grahamgilbert / crypt

Issue with 10.14 and Crypt #92