search

grasmax / s1

Konfiguration einer Photovoltaik-Inselanlage mit Victron- und Pylontech-Modulen
Creative Commons Zero v1.0 Universal
2 stars 0 forks source link

Victron Cerbo - Why isn't the energy meter EM540 displayed under Energy Meters in the CerboGX? #13

Closed grasmax closed 1 year ago

grasmax commented 1 year ago

https://community.victronenergy.com/questions/216335/why-isnt-the-energy-meter-em540-displayed-under-en.html The EM540 is not shown in the Cerbo console

CerboGX v2.75, no ESS, used in pv island

EM540DINAV23XS1X, configured as 3Pn, L1: MPII-AC-OUT1 to Load, L2: Grid to MPII-AC-IN

Cable Victron "USB-RS485-WE"

The counter works.

The cable is OK and properly connected because it works with the USC program.

The cable is also recognized by the Cerbo as:

usb-FTDI_FT232R_USB_UART_A10N4HQX-if00-port0 -> ../../ttyUSB0

Changes to the product ID in the cable with ft_prog are visible in Cerbo

usb-FTDI_USB-RS485_Cable_A10N4HQX-if00-port0 -> ../../ttyUSB0

Changes in Cerbo in ../../etc/udev/rules.d/serial-starter.rules did not work

Modification of ../../etc/udev/rules.d/serial-starter.rules had no effect.

grasmax commented 1 year ago

Solution from https://community.victronenergy.com/users/2696/mlange.html Firmeware Update Victron Cerbo GX from 2.75 to 3.0