Installation Problem

[GoogleCodeExporter]

What steps will reproduce the problem?
1. used installous to install the ipa it said invalid ipa
2. used ifunbox it said iFunBox App install: Failed (0xe800007e)

3.

What is the expected output? What do you see instead?
invalid ipa

What version of the product are you using? On what operating system?
iphone 4 with ios 4.2.1

Please provide any additional information below.

Original issue reported on code.google.com by nishanth...@gmail.com on 31 May 2011 at 11:46

[GoogleCodeExporter]

[deleted comment]

[GoogleCodeExporter]

What firmware r u using

Original comment by nishanth...@gmail.com on 31 May 2011 at 7:09

[GoogleCodeExporter]

im using 4.3.1,guess is that. try to update your firmware,not a hard thing to 
do :]

Original comment by master...@gmail.com on 31 May 2011 at 8:26

[GoogleCodeExporter]

Cannot install IPA through iTunes or Installous.

Firmware:
Snowbreeze custom 4.2.8 firmware

iTunes Error:
Requires newer firmware

Installous Error:
Invalid IPA

.3 worked great, but you should also try to get iTransmission into a repo to 
avoid all of the manual installation problems.

Great work man, I've been looking for a torrent client for months, and today 
xSellize 'cracked' v.3. Until I hear something on this, I'll be using v.3.

Thanks,
guitarp

Original comment by pyork211...@gmail.com on 1 Jun 2011 at 4:01

[GoogleCodeExporter]

I was able to get the latest .ipa build to install by modidying the 
"minimum version" string within the .ipa

I used this tool to modify the .plist file 
http://www.softsea.com/review/plist-Editor.html

use winrar to view the contents of the ipa, then enter folder:
payload -> iTransmission.app->info.plist

edit and replace the old plist file.
then install with ifunbox 

Original comment by JonMHo...@gmail.com on 4 Jun 2011 at 12:40

[GoogleCodeExporter]

@Jon

This workaround did work, and I thank you for it.

guitarp

Original comment by pyork211...@gmail.com on 4 Jun 2011 at 2:09

[GoogleCodeExporter]

@jon

works perfect thanks

Original comment by nishanth...@gmail.com on 4 Jun 2011 at 9:27

[GoogleCodeExporter]

[deleted comment]

[GoogleCodeExporter]

You change it exactly as he says:

Using that program fond the Minimum Version attribute, should say 4.3. Change 
it to 4.0

Not sure if this still applies to the newer versions or if it's been fixed.

Original comment by pyork211...@gmail.com on 12 Jun 2011 at 5:25

[GoogleCodeExporter]

[deleted comment]

[GoogleCodeExporter]

There isnt a need for plist editor. Just use iFile(available on cydia) to 
browse your iDevice and edit the plist file. Respring once after you edit 
info.plist

Original comment by protyush...@gmail.com on 13 Jun 2011 at 2:20

[GoogleCodeExporter]

[deleted comment]

[GoogleCodeExporter]

[deleted comment]

[GoogleCodeExporter]

[deleted comment]

[GoogleCodeExporter]

[deleted comment]

[GoogleCodeExporter]

Works perfect in 4.2.1 thank you so much :D

Original comment by nishanth...@gmail.com on 15 Jun 2011 at 7:54

[GoogleCodeExporter]

Sorry that the minimum version was set to wrong value, it will be corrected in 
next release. For now, please refer to @Jon's solution. 

Original comment by ccp0...@gmail.com on 19 Jun 2011 at 1:35

• Changed state: Accepted

[GoogleCodeExporter]

Issue 7 has been merged into this issue.

Original comment by ccp0...@gmail.com on 19 Jun 2011 at 1:40

[GoogleCodeExporter]

Issue 9 has been merged into this issue.

Original comment by ccp0...@gmail.com on 19 Jun 2011 at 1:43

[GoogleCodeExporter]

Please try the following.. hope it helps..
You can clear your cache or cookies in ‘Settings’, ‘Safari’

If that doesn’t help, pls try the following…

‘Settings’, then ‘carrier’, unchecked ‘Automatic’,

wait for a while to see all the available service providers just below 
‘Automatic’ function, then choose ur service provider manually.. e.g. 
AT&T, T-Mobile, SingTel, StarHub,etc.. then 
**’REBOOT’**(//##important##//*)..

NOTE (important) : you may still need to switch between ‘Automatic’ and 
‘Manual’ carrier mode since you may still encounter the same issue while 
you are in ‘Manual’ carrier mode. Just switch them vice versa..

if you think your service provider’s 3G is not powerful enough, please try to 
install ‘My3G Cracked’ from SinfuliPhone.. It makes ur iphone thinks 3G as 
WiFi.. hv fun..

Original comment by phar...@gmail.com on 21 Jun 2011 at 10:08

[GoogleCodeExporter]

[deleted comment]

[GoogleCodeExporter]

i can't install the version 1.1, i tried everything: edit info plist but it 
wrote 0xe8003ffe unknown error. I've ipod touch 2 gen with 4.2.1 . The older 
version works well.Have anyone idea?

Original comment by pok...@gmail.com on 27 Jul 2011 at 7:53

[GoogleCodeExporter]

[deleted comment]

[GoogleCodeExporter]

[deleted comment]

[GoogleCodeExporter]

I have iPod touch 2nd generation 4.2.1. I installed version 1.1 via Xsellize 
repo (didn't know where else to get it, since installing through installous 
gave me "invalid ipa").
It crashes on startup, blackscreen and then back to springboard.

Original comment by ACLarrab...@gmail.com on 31 Jul 2011 at 10:00

[GoogleCodeExporter]

Here's the patched IPA, for firmware onwards of 4.0.

http://golden-tomb.co.cc/iTransmission_1.1.ipa

Original comment by zvitorep...@gmail.com on 19 Aug 2011 at 11:17

[GoogleCodeExporter]

I think the owner should compare betwen the biary cod of 0.5 and 1.1 and see 
the difrensses

Original comment by smah...@gmail.com on 4 Sep 2011 at 9:38

[GoogleCodeExporter]

I've read through every scrap of information I could find and I'm in the same 
boat as most of the other people with install issues. 

My device:
iPod Touch 2G
iOS 4.2.1
Mobile Substrate Add-Ons
    -Activator
    -Preference Loader
    -libhide
    -resupported

I've used winSCP to put iTransmission.app into my Applications folder, I've ran 
chmod but it crashes on launch. Oh and yes I've resprung after the changes etc.

After reading some other posts I've tried putting the ipa into the installous 
downloads folder (again with the info.plist modded) but it says invalid ipa.

I've tried 1.1 and 0.5 but no luck.

I would very much like a torrent app on the ipod, it would bring new life to 
this 2g iTouch that I have. I appreciate the time and effort you've put into 
this, all I'm asking is a little direction on trying to get it installed. I'm 
no linux guru but I'm not a complete newbie either. Hopefully with the info 
I've given maybe you could shed some light as to why its not installing.

Thanks

Since it appears there are many of us facing the same issue could you try to 
answer or provide some debug suggestions?

Original comment by jphphoto...@gmail.com on 28 Sep 2011 at 4:27

[GoogleCodeExporter]

Easy fix bro, your recompiling it from when u editted plist wrong... I have a 
comment somr where on her with detailed Instructions, also i had a direct dl 
link with if already done for you but idk if it got taken down?

Original comment by machster...@hotmail.com on 28 Sep 2011 at 10:05

[GoogleCodeExporter]

@ Machster 
What are you using to recompile it? I've been renaming to .zip then opening 
with 7zip, editing the plist with plist editor, then trying to install from 
there. I've looked through pretty much all of the comments on here so I'd very 
much appreciate it if you could just elaborate a little more (ie what programs 
are you using)Also when you say recompile are you meaning compile as in the 
sense of compiling a program or is this a mistranslation and you're meaning 
rebuild the archive?

Original comment by jphphoto...@gmail.com on 29 Sep 2011 at 1:54

[GoogleCodeExporter]

Nah, jus when u rebuild after editting... Ull kno u did it right when itunes 
accepts it! Im telling u somewhere i had a tut, less he took it down? Im at 
work until morning, ill try n get u a dl link back up with it already done...

Original comment by machster...@hotmail.com on 29 Sep 2011 at 2:16

[GoogleCodeExporter]

@Machster
The one that you had fixed and uploaded to mediafire no longer exists, try 
dropbox and then just post the public link. Also, I'm not using itunes to 
install the apps, can I not do it through installous or directly via WinSCP?

Original comment by jphphoto...@gmail.com on 29 Sep 2011 at 2:50

[GoogleCodeExporter]

U can and will use installous, i was jus sayin itunes will give u an idea if it 
a valid ipa, gimmie ur email, ill send an ipa i jus did on my phone to u... Uhh 
might work lol

Original comment by machster...@hotmail.com on 29 Sep 2011 at 2:57

[GoogleCodeExporter]

Or, dl ifile on ipod from cydia, then safari dl manager from cydia, then goto 
link here on ipod and dl file, use ifile to find it, and change to .zip, 
unarchive, edit plist with property list editor(plist), make changes, rezip 
with ifile, change back to ipa, move to installous dl, open installous and 
install .... Uhh thats outa my head so cross ur fingers?

Original comment by machster...@hotmail.com on 29 Sep 2011 at 3:02

[GoogleCodeExporter]

Oh and while ur editn, turn off exitonsuspension string so itll dl while app 
closes

Original comment by machster...@hotmail.com on 29 Sep 2011 at 3:03

[GoogleCodeExporter]

Is 2g supported anyways??

Original comment by machster...@hotmail.com on 29 Sep 2011 at 3:04

[GoogleCodeExporter]

I did all of that, tried editing on PC, tried doing as you suggested and 
editing via ifile etc no luck. As for if 2G is supported its not officially 
stated anywhere on here, there have been quite a few people commenting though 
claiming to be using it on a 2G ipod touch running iOS 4.2.1 like I am. 

Basically I'm not retarded and I've followed everything correctly, just thought 
I had to be missing something. Perhaps something else that I've installed is 
messing this up. I'll email you (machster) and if you want to send me your ipa 
I'll give it one last go.

Original comment by jphphoto...@gmail.com on 29 Sep 2011 at 3:12

[GoogleCodeExporter]

FYI for anyone reading this, I've finally been able to install this on a 2G 
ipod touch running iOS 4.2.1 however the info.plist hack only works for 
iTransmission version 0.5 and lower.

Either the developer will address this or he won't, I just thought I'd mention 
this so others don't bang their head against the wall trying to figure out why 
its not working. Just do the info.plist work around with 0.5 and install 
backgrounder, seems to work just fine so 1.1 isn't necessary.

Original comment by jphphoto...@gmail.com on 5 Oct 2011 at 3:27

[GoogleCodeExporter]

U dont need backgrounder if u set the string for exiting to off

Original comment by machster...@hotmail.com on 5 Oct 2011 at 3:42

[GoogleCodeExporter]

the updated 1.1 provided by  zvitorep...@gmail.com, Aug 19, 2011 works.download 
it and use installous.
http://golden-tomb.co.cc/iTransmission_1.1.ipa

Original comment by primast...@gmail.com on 9 Dec 2011 at 12:36

[GoogleCodeExporter]

found stable one in xsellize at http://cydia.xsellize.com/

Original comment by primast...@gmail.com on 9 Dec 2011 at 12:54

[GoogleCodeExporter]

I'm having trouble installing on my iPhone what I'm I doing wrong

Original comment by Moviekin...@yahoo.com on 18 Feb 2012 at 7:44

[GoogleCodeExporter]

Not installing in ios 8.1.3
Pls help

Original comment by anees...@gmail.com on 25 Feb 2015 at 4:34