search

greatscottgadgets / hackrf

low cost software radio platform
https://greatscottgadgets.com/hackrf/
GNU General Public License v2.0
6.24k stars 1.48k forks source link

Can not recieve after transmitting #1389

Closed Amarthol78 closed 6 months ago

Amarthol78 commented 6 months ago

Have you read the HackRF troubleshooting documentation?

yes

What outcome were you hoping for?

To be able to receive after transmitting

What outcome actually happened?

Need to turn the unit off then back on after transmitting to be able to receive.

What operating systems are you seeing the problem on?

only tried on the portapack

What is the output of hackrf_info?

hackrf_info version: git-7047252 libhackrf version: git-7047252 (0.6) Found HackRF Index: 0 Serial number: 0000000000000000675c62dc343375cf Board ID Number: 4 (Unknown Board ID) Firmware Version: n_231216 (API:1.08) Part ID Number: 0xa000cb3c 0x00584768

Are you using any third-party software?

n/a

Are you using any third-party hardware?

portapack h2+

Amarthol78 commented 6 months ago

Ok, it seems that transmitting is not really working. I tried the BLE spam from the portapack to my phone but nothing ever showed up so I then tried other transmissions as well with an RTL-SDR plugged into my laptop, I see signal but there is no content.

And I still need to power cycle the Hackrf to be able to receive again. I have only had this for a couple weeks and its always done this, please, I could use some help!

straithe commented 6 months ago

This seems to be an issue with your Portapack and not your HackRF. Please contact the seller you purchased your Portapack from for support.

M0rn1ng574r commented 6 months ago

Have you chosen the type of phone you have? On BLE spam, If you chose Android but you have iOS this will not work!

Amarthol78 commented 6 months ago

Filed a bug report on the Mayhem github repo. Turns out I had to refresh the CPLD, it's all good and working now! Thanks for the help.