Multiple Ubertooths Cannot Operate in KIsmet

[me-elliott]

Steps to reproduce

1.Have two Ubertooth-1's connected directly to two USB ports

2. Have KIsmet installed 3.Have ubertooth installed and updated firmware on all Ubertooth devices to be 2020-12-R1 (API:1.07)
3. Run KIsmet
4. Add Sources
5. Try to add multiple Ubertooth devices in KIsmet.

Expected behaviour

Kismet should take in multiple data sources, and both Ubertooth-1's should be collecting data

Actual behaviour

UBertooth-0 , which ever enummerates as the first position, will be able to load the data into KIsmet, but Ubertooth-1 will not be able to. KIsmet shows the error that it is trying to re-open source. Error is below:

INFO: Attempting to re-open source ubertooth-1 multiple Ubertooth devices found! Use '-U' to specify device number libUSB Error: Operation timed out: (-7)

However, I thought there was a patch in the Ubertooth package under KIsmet to deal with multiple Ubertooth devices .

Version information

Operating system: Ubuntu 20.04.3

Ubertooth tools version (ubertooth-rx -V): libubertooth 1.1 (2020-12-R1), libbtb 1.0 (2018-06-R1)

Ubertooth firmware version (ubertooth-util -v): 2020-12-R1 (API:1.07)

If you are reporting a problem that involves third party software (Wireshark/Kismet/etc), please report the version here. Kismet : Ubuntu 20.04 Focal (amd64, arm)

Output

Issue also exists in Ubertooth's specan-ui (ubertooth-specan-ui). When only one is plugged in, I can see the spectrum, but when I plug two in, nothing is displayed. The error shows as:

Could not open Ubertooth device Failed to run: ubertooth-specan -d - -l 2400 -u 2483 -U -1

[straithe]

Have you brought the multiple device request to the Kismet folks? https://www.kismetwireless.net/

[straithe]

I'm closing this as there hasn't been a response in over 30 days. Please re-open this issue or open a new one if you still need assistance.