lease provide this info. See this link for more info on how to gather debug info: http://www.candelatech.com/ath10k-bugs.php

Description of the problem (how to configure, how to reproduce, how often it happens).

NAME="Ubuntu" VERSION="19.10 (Eoan Ermine)"

Installed ubuntu version 19.10, downloaded kernel source (https://github.com/greearb/linux-ct-5.2),

git clone https://github.com/greearb/linux-ct-5.2.git download patches for ubuntu and applied: https://kernel.ubuntu.com/~kernel-ppa/mainline/v5.2.14/ cd ~/Downloads/linux-ct-5.2 patch -p1 < ../0001-.patch ... patch -p1 < ../0006-.patch cp /boot/config-uname -r .config yes '' | make oldconfig make clean make -j 2 sudo make modules_install sudo make install

reboot to that kernel

cd ~/Downloads/ath10k-ct ./build_me.sh ~/Downloads//linux-ct-5.2 enter: 5.2

copy four co files to /usr/lib/modules/5.2.14+/kernel/drivers/net/wireless/ath/ath10k/

sudo modprobe -r ath10k_pci sudo modprobe ath10k_pci

Software (OS, Firmware version, kernel, driver, etc)

uname -a Linux gs-server 5.2.14+ #3 SMP Wed Oct 16 00:32:21 CEST 2019 x86_64 x86_64 x86_64 GNU/Linux

Firmware_version: firmware-5-ct-non-commercial-htt-mgt.bin

-rw-r--r-- 1 root root 543764 lis 16 09:41 /lib/firmware/ath10k/QCA9984/hw1.0/firmware-5.bin

board: -rw-r--r-- 1 root root 157648 lis 13 19:14 /lib/firmware/ath10k/QCA9984/hw1.0/board-2.bin

Ath10k driver

Atf10k 5.1 driver ethtool -i wlp6s0 driver: ath10k_pci version: 5.2.14+ firmware-version: 10.4b-ct-9984-xtH-012-e747272a4 expansion-rom-version: bus-info: 0000:06:00.0 supports-statistics: yes supports-test: no supports-eeprom-access: no supports-register-dump: no supports-priv-flags: no

Hardware (NIC chipset, platform, etc)

NIC: Compex COMPEX WLE1216V5-20 5GHz Platform: KANSUNG Model: K515G6 (https://bit.ly/2IOlSeQ)

hostapd -v

hostapd v2.9 User space daemon for IEEE 802.11 AP management,

cat /etc/hostapd/hostapd.conf

driver=nl80211 logger_syslog=-1 logger_syslog_level=2 logger_stdout=-1 logger_stdout_level=2 hw_mode=a channel=100 country_code=AU ieee80211d=1 ieee80211h=1

ERROR

Failed to start radar detection: -16 (Device or resource busy)

sudo -i hostapd -dd /etc/hostapd/hostapd.conf

random: getrandom() support available Configuration file: /etc/hostapd/hostapd.conf ctrl_interface_group=0 nl80211: Supported cipher 00-0f-ac:1 nl80211: Supported cipher 00-0f-ac:5 nl80211: Supported cipher 00-0f-ac:2 nl80211: Supported cipher 00-0f-ac:4 nl80211: Supported cipher 00-0f-ac:6 nl80211: Supported cipher 00-0f-ac:13 nl80211: Supported cipher 00-0f-ac:11 nl80211: Supported cipher 00-0f-ac:12 nl80211: Supported cipher 00-0f-ac:8 nl80211: Supported cipher 00-0f-ac:9 nl80211: Supported cipher 00-0f-ac:10 nl80211: Using driver-based off-channel TX nl80211: Driver-advertised extended capabilities (default) - hexdump(len=8): 04 00 00 00 00 00 00 40 nl80211: Driver-advertised extended capabilities mask (default) - hexdump(len=8): 04 00 00 00 00 00 00 40 nl80211: use P2P_DEVICE support nl80211: interface wlp6s0 in phy phy1 nl80211: Set mode ifindex 8 iftype 3 (AP) nl80211: Failed to set interface 8 to mode 3: -16 (Device or resource busy) nl80211: Try mode change after setting interface down nl80211: Set mode ifindex 8 iftype 3 (AP) nl80211: Mode change succeeded while interface is down nl80211: Setup AP(wlp6s0) - device_ap_sme=0 use_monitor=0 nl80211: Subscribe to mgmt frames with AP handle 0x55b5719e47c0 nl80211: Register frame type=0xb0 (WLAN_FC_STYPE_AUTH) nl_handle=0x55b5719e47c0 match= nl80211: Register frame type=0x0 (WLAN_FC_STYPE_ASSOC_REQ) nl_handle=0x55b5719e47c0 match= nl80211: Register frame type=0x20 (WLAN_FC_STYPE_REASSOC_REQ) nl_handle=0x55b5719e47c0 match= nl80211: Register frame type=0xa0 (WLAN_FC_STYPE_DISASSOC) nl_handle=0x55b5719e47c0 match= nl80211: Register frame type=0xc0 (WLAN_FC_STYPE_DEAUTH) nl_handle=0x55b5719e47c0 match= nl80211: Register frame type=0x40 (WLAN_FC_STYPE_PROBE_REQ) nl_handle=0x55b5719e47c0 match= nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x55b5719e47c0 match=04 nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x55b5719e47c0 match=0501 nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x55b5719e47c0 match=0503 nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x55b5719e47c0 match=0504 nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x55b5719e47c0 match=06 nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x55b5719e47c0 match=08 nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x55b5719e47c0 match=09 nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x55b5719e47c0 match=0a nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x55b5719e47c0 match=11 nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x55b5719e47c0 match=12 nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x55b5719e47c0 match=7f rfkill: initial event: idx=1 type=1 op=0 soft=0 hard=0 nl80211: Add own interface ifindex 8 (ifidx_reason -1) nl80211: if_indices[16]: 8(-1) phy: phy1 BSS count 1, BSSID mask 00:00:00:00:00:00 (0 bits) wlp6s0: interface state UNINITIALIZED->COUNTRY_UPDATE Previous country code AU, new country code AU nl80211: Regulatory information - country=AU (DFS-ETSI) nl80211: 2400-2483 @ 40 MHz 36 mBm nl80211: 5150-5250 @ 80 MHz 23 mBm (no outdoor) nl80211: 5250-5350 @ 80 MHz 20 mBm (no outdoor) (DFS) nl80211: 5470-5600 @ 80 MHz 27 mBm (DFS) nl80211: 5650-5730 @ 80 MHz 27 mBm (DFS) nl80211: 5730-5850 @ 80 MHz 36 mBm nl80211: 57000-66000 @ 2160 MHz 43 mBm (no outdoor) nl80211: Mode IEEE 802.11a: 5180 5200 5220 5240 5260[NO_IR][RADAR] 5280[NO_IR][RADAR] 5300[NO_IR][RADAR] 5320[NO_IR][RADAR] 5500[NO_IR][RADAR] 5520[NO_IR][RADAR] 5540[NO_IR][RADAR] 5560[NO_IR][RADAR] 5580[NO_IR][RADAR] Allowed channel: mode=2 chan=36 freq=5180 MHz max_tx_power=23 dBm Allowed channel: mode=2 chan=40 freq=5200 MHz max_tx_power=23 dBm Allowed channel: mode=2 chan=44 freq=5220 MHz max_tx_power=23 dBm Allowed channel: mode=2 chan=48 freq=5240 MHz max_tx_power=23 dBm Allowed channel: mode=2 chan=52 freq=5260 MHz max_tx_power=20 dBm (DFS state = usable) Allowed channel: mode=2 chan=56 freq=5280 MHz max_tx_power=20 dBm (DFS state = usable) Allowed channel: mode=2 chan=60 freq=5300 MHz max_tx_power=20 dBm (DFS state = usable) Allowed channel: mode=2 chan=64 freq=5320 MHz max_tx_power=20 dBm (DFS state = usable) Allowed channel: mode=2 chan=100 freq=5500 MHz max_tx_power=27 dBm (DFS state = usable) Allowed channel: mode=2 chan=104 freq=5520 MHz max_tx_power=27 dBm (DFS state = usable) Allowed channel: mode=2 chan=108 freq=5540 MHz max_tx_power=27 dBm (DFS state = usable) Allowed channel: mode=2 chan=112 freq=5560 MHz max_tx_power=27 dBm (DFS state = usable) Allowed channel: mode=2 chan=116 freq=5580 MHz max_tx_power=27 dBm (DFS state = usable) Allowed channel: mode=2 chan=132 freq=5660 MHz max_tx_power=27 dBm (DFS state = usable) Allowed channel: mode=2 chan=136 freq=5680 MHz max_tx_power=27 dBm (DFS state = usable) Allowed channel: mode=2 chan=140 freq=5700 MHz max_tx_power=27 dBm (DFS state = usable) Allowed channel: mode=2 chan=144 freq=5720 MHz max_tx_power=27 dBm (DFS state = usable) Allowed channel: mode=2 chan=149 freq=5745 MHz max_tx_power=36 dBm Allowed channel: mode=2 chan=153 freq=5765 MHz max_tx_power=36 dBm Allowed channel: mode=2 chan=157 freq=5785 MHz max_tx_power=36 dBm Allowed channel: mode=2 chan=161 freq=5805 MHz max_tx_power=36 dBm Allowed channel: mode=2 chan=165 freq=5825 MHz max_tx_power=36 dBm Disable HT capability [DSSS_CCK-40] on 5 GHz band hw vht capab: 0x339b79fa, conf vht capab: 0x338818f2 wlp6s0: interface state COUNTRY_UPDATE->HT_SCAN Scan for neighboring BSSes prior to enabling 40 MHz channel 40 MHz affected channel range: [5490,5530] MHz wlp6s0: nl80211: scan request nl80211: Passive scan requested nl80211: Scan frequency 5500 MHz nl80211: Scan frequency 5520 MHz Scan requested (ret=0) - scan timeout 10 seconds Interface initialization will be completed in a callback ctrl_iface not configured! RTM_NEWLINK: ifi_index=8 ifname=wlp6s0 operstate=2 linkmode=0 ifi_family=0 ifi_flags=0x1002 () nl80211: Ignore interface down event since interface wlp6s0 is up RTM_NEWLINK: ifi_index=8 ifname=wlp6s0 operstate=2 linkmode=0 ifi_family=0 ifi_flags=0x1003 ([UP]) nl80211: Event message available nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlp6s0 wlp6s0: nl80211: Scan trigger wlp6s0: Event SCAN_STARTED (47) received Unknown event 47 RTM_NEWLINK: ifi_index=8 ifname=wlp6s0 wext ifi_family=0 ifi_flags=0x1003 ([UP]) nl80211: Event message available nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlp6s0 wlp6s0: nl80211: New scan results available nl80211: Scan included frequencies: 5500 5520 wlp6s0: Event SCAN_RESULTS (3) received nl80211: Received scan results (0 BSSes) HT40: control channel: 100 secondary channel: 104 Completing interface initialization Mode: IEEE 802.11a Channel: 100 Frequency: 5500 MHz DFS 8 channels required radar detection DFS all channels available, (SKIP CAC): no DFS 3 chans unavailable - choose other channel: yes DFS: Selecting random channel DFS new chan checking 8 channels Adding channel: 36 DFS new chan checking 8 channels Selected ch. #36 DFS adjusting VHT center frequency: 50, 0 DFS 4 channels required radar detection DFS all channels available, (SKIP CAC): no DFS 0 chans unavailable - choose other channel: no wlp6s0: interface state HT_SCAN->DFS DFS start CAC on 5180 MHz wlp6s0: DFS-CAC-START freq=5180 chan=36 sec_chan=1, width=2, seg0=50, seg1=0, cac_time=60s nl80211: Start radar detection (CAC) 5180 MHz (ht_enabled=1, vht_enabled=1, he_enabled=0, bandwidth=160 MHz, cf1=5250 MHz, cf2=0 MHz)

freq=5180
he_enabled=0
vht_enabled=1
ht_enabled=1
bandwidth=160
channel_width=5
center_freq1=5250
center_freq2=0 nl80211: Failed to start radar detection: -16 (Device or resource busy) DFS start_dfs_cac() failed, -1 Interface initialization failed wlp6s0: interface state DFS->DISABLED wlp6s0: AP-DISABLED hostapd_interface_deinit_free(0x55b5719da9b0) hostapd_interface_deinit_free: num_bss=1 conf->num_bss=1 hostapd_interface_deinit(0x55b5719da9b0) wlp6s0: interface state DISABLED->DISABLED hostapd_bss_deinit: deinit bss wlp6s0 wlp6s0: Deauthenticate all stations nl80211: send_mlme - da= ff:ff:ff:ff:ff:ff noack=0 freq=0 no_cck=0 offchanok=0 wait_time=0 fc=0xc0 (WLAN_FC_STYPE_DEAUTH) nlmode=3 nl80211: send_mlme -> send_frame nl80211: send_frame - Use bss->freq=0 nl80211: send_frame -> send_frame_cmd nl80211: CMD_FRAME freq=0 wait=0 no_cck=0 no_ack=0 offchanok=0 CMD_FRAME - hexdump(len=26): c0 00 00 00 ff ff ff ff ff ff 04 f0 21 49 44 26 04 f0 21 49 44 26 00 00 03 00 nl80211: Frame command failed: ret=-22 (Invalid argument) (freq=0 wait=0) wlp6s0: AP-DISABLED hostapd_cleanup(hapd=0x55b5719dbfe0 (wlp6s0)) wlp6s0: CTRL-EVENT-TERMINATING hostapd_free_hapd_data: Interface wlp6s0 wasn't started hostapd_interface_deinit_free: driver=0x55b5713347e0 drv_priv=0x55b5719dee00 -> hapd_deinit nl80211: deinit ifname=wlp6s0 disabled_11b_rates=0 nl80211: Remove monitor interface: refcount=0 nl80211: Remove beacon (ifindex=8) netlink: Operstate: ifindex=8 linkmode=0 (kernel-control), operstate=6 (IF_OPER_UP) nl80211: Set mode ifindex 8 iftype 2 (STATION) nl80211: Failed to set interface 8 to mode 2: -16 (Device or resource busy) nl80211: Try mode change after setting interface down nl80211: Set mode ifindex 8 iftype 2 (STATION) nl80211: Mode change succeeded while interface is down nl80211: Teardown AP(wlp6s0) - device_ap_sme=0 use_monitor=0 nl80211: Unsubscribe mgmt frames handle 0x8888dd3df916cf49 (AP teardown) hostapd_interface_free(0x55b5719da9b0) hostapd_interface_free: free hapd 0x55b5719dbfe0 hostapd_cleanup_iface(0x55b5719da9b0) hostapd_cleanup_iface_partial(0x55b5719da9b0) hostapd_cleanup_iface: free iface=0x55b5719da9b0

interface=wlp6s0 ctrl_interface=/var/run/hostapd ctrl_interface_group=0 disassoc_low_ack=1 preamble=1 wmm_enabled=1 macaddr_acl=0 auth_algs=1 ignore_broadcast_ssid=0 wpa=2 wpa_passphrase=XXXXXXX wpa_key_mgmt=WPA-PSK wpa_pairwise=TKIP rsn_pairwise=CCMP ssid=test ieee80211n=1 ht_capab=[HT40+][LDPC][SHORT-GI-20][SHORT-GI-40][TX-STBC][RX-STBC1][DSSS_CCK-40] ieee80211ac=1 vht_oper_chwidth=2 vht_oper_centr_freq_seg0_idx=114 vht_capab=[RXLDPC][SHORT-GI-80][SHORT-GI-160][TX-STBC-2BY1][SU-BEAMFORMER][SU-BEAMFORMEE][MU-BEAMFORMER][MU-BEAMFORMEE][RX-ANTENNA-PATTERN][TX-ANTENNA-PATTERN][RX-STBC1][MAX-MPDU-11454][MAX-A-MPDU-LEN-EXP7]

dmesg -T

[sri lis 16 10:50:47 2019] ath10k 5.1 driver, optimized for CT firmware, probing pci device: 0x46. [sri lis 16 10:50:47 2019] ath10k_pci 0000:06:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0 [sri lis 16 10:50:48 2019] ath10k_pci 0000:06:00.0: qca9984/qca9994 hw1.0 target 0x01000000 chip_id 0x00000000 sub 168c:cafe [sri lis 16 10:50:48 2019] ath10k_pci 0000:06:00.0: kconfig debug 0 debugfs 1 tracing 1 dfs 0 testmode 0 [sri lis 16 10:50:48 2019] ath10k_pci 0000:06:00.0: firmware ver 10.4b-ct-9984-xtH-012-e747272a4 api 5 features mfp,peer-flow-ctrl,txstatus-noack,wmi-10.x-CT,rxswcrypt-CT,ratemask-CT,regdump-CT,txrate-CT,flush-all-CT,pingpong-CT,ch-regs-CT,nop-CT,htt-mgt-CT,set-special-CT,no-bmiss-CT,tx-rc-CT,cust-stats-CT,CT-STA,txrate2-CT,beacon-cb-CT,wmi-block-ack-CT,wmi-bcn-rc-CT crc32 c34f0b8a [sri lis 16 10:50:49 2019] ath10k_pci 0000:06:00.0: board_file api 2 bmi_id 0:31 crc32 e807b522 [sri lis 16 10:50:51 2019] ath10k_pci 0000:06:00.0: unsupported HTC service id: 1536 [sri lis 16 10:50:51 2019] ath10k_pci 0000:06:00.0: 10.4 wmi init: vdevs: 16 peers: 48 tid: 96 [sri lis 16 10:50:51 2019] ath10k_pci 0000:06:00.0: msdu-desc: 2500 skid: 32 [sri lis 16 10:50:51 2019] ath10k_pci 0000:06:00.0: wmi print 'P 48/48 V 16 K 144 PH 176 T 186 msdu-desc: 2500 sw-crypt: 0 ct-sta: 0' [sri lis 16 10:50:51 2019] ath10k_pci 0000:06:00.0: wmi print 'free: 128804 iram: 23924 sram: 44084' [sri lis 16 10:50:52 2019] ath10k_pci 0000:06:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal otp max-sta 32 raw 0 hwcrypto 1 [sri lis 16 10:50:52 2019] ath: EEPROM regdomain: 0x0, reg-addr: 0000000035d18765 [sri lis 16 10:50:52 2019] ath: EEPROM indicates default country code should be used [sri lis 16 10:50:52 2019] ath: doing EEPROM country->regdmn map search [sri lis 16 10:50:52 2019] ath: country maps to regdmn code: 0x3a [sri lis 16 10:50:52 2019] ath: Country alpha2 being used: US [sri lis 16 10:50:52 2019] ath: Regpair used: 0x3a [sri lis 16 10:50:52 2019] ath: ath: Not applying default regdom, alpha2: US [sri lis 16 10:50:52 2019] cfg80211: Setting DFS Master region in update_regulatory, was: AU ETSI, new: AU ETSI lr: 00000000bec8b0a3 regdom: 00000000ecfbde1d [sri lis 16 10:50:52 2019] cfg80211: wiphy 04:f0:21:49:44:26: Disabling freq 5600 MHz (regdom-not-set-by-driver) [sri lis 16 10:50:52 2019] cfg80211: wiphy 04:f0:21:49:44:26: Disabling freq 5620 MHz (regdom-not-set-by-driver) [sri lis 16 10:50:52 2019] cfg80211: wiphy 04:f0:21:49:44:26: Disabling freq 5640 MHz (regdom-not-set-by-driver) [sri lis 16 10:50:52 2019] cfg80211: wiphy 04:f0:21:49:44:26: Disabling freq 5845 MHz (regdom-not-set-by-driver) [sri lis 16 10:50:52 2019] cfg80211: wiphy 04:f0:21:49:44:26: Disabling freq 5865 MHz (regdom-not-set-by-driver) [sri lis 16 10:50:52 2019] cfg80211: intersect-dfs-region, region1: 1 region2: 2 [sri lis 16 10:50:52 2019] cfg80211: Setting DFS Master region in update_regulatory, was: US unset, new: 98 unset lr: 00000000c8cd9d30 regdom: 000000003fdf0336 [sri lis 16 10:50:52 2019] cfg80211: wiphy 04:f0:21:49:44:26: Disabling freq 5845 MHz (regdom-not-set-by-driver) [sri lis 16 10:50:52 2019] cfg80211: wiphy 04:f0:21:49:44:26: Disabling freq 5865 MHz (regdom-not-set-by-driver) [sri lis 16 10:50:52 2019] ath10k_pci 0000:06:00.0 wlp6s0: renamed from wlan0 [sri lis 16 10:51:04 2019] ath10k_pci 0000:06:00.0: unsupported HTC service id: 1536 [sri lis 16 10:51:04 2019] ath10k_pci 0000:06:00.0: 10.4 wmi init: vdevs: 16 peers: 48 tid: 96 [sri lis 16 10:51:04 2019] ath10k_pci 0000:06:00.0: msdu-desc: 2500 skid: 32 [sri lis 16 10:51:04 2019] ath10k_pci 0000:06:00.0: wmi print 'P 48/48 V 16 K 144 PH 176 T 186 msdu-desc: 2500 sw-crypt: 0 ct-sta: 0' [sri lis 16 10:51:04 2019] ath10k_pci 0000:06:00.0: wmi print 'free: 128804 iram: 23924 sram: 44084' [sri lis 16 10:51:04 2019] ath10k_pci 0000:06:00.0: Firmware lacks feature flag indicating a retry limit of > 2 is OK, requested limit: 4 [sri lis 16 10:51:05 2019] ath10k_pci 0000:06:00.0: NOTE: Firmware DBGLOG output disabled in debug_mask: 0x10000000 [sri lis 16 10:51:09 2019] start-radar: dfs_region == DFS_UNSET [sri lis 16 10:51:09 2019] wlp6s0: do_stop, canceling dfs-cac-timer-work. [sri lis 16 10:51:09 2019] ath10k_pci 0000:06:00.0: peer-unmap-event: unknown peer id 0

just added some debugging.

[sri lis 16 11:00:41 2019] ath10k_pci 0000:06:00.0: Setting debug-mask to: 0xc0000032 old: 0x10000000 [sri lis 16 11:03:11 2019] wlp6s0: do_stop, canceling dfs-cac-timer-work. [sri lis 16 11:03:13 2019] ath10k_pci 0000:06:00.0: unsupported HTC service id: 1536 [sri lis 16 11:03:13 2019] ath10k_pci 0000:06:00.0: 10.4 wmi init: vdevs: 16 peers: 48 tid: 96 [sri lis 16 11:03:13 2019] ath10k_pci 0000:06:00.0: msdu-desc: 2500 skid: 32 [sri lis 16 11:03:13 2019] ath10k_pci 0000:06:00.0: wmi print 'P 48/48 V 16 K 144 PH 176 T 186 msdu-desc: 2500 sw-crypt: 0 ct-sta: 0' [sri lis 16 11:03:13 2019] ath10k_pci 0000:06:00.0: wmi print 'free: 128804 iram: 23924 sram: 44084' [sri lis 16 11:03:14 2019] ath10k_pci 0000:06:00.0: Firmware lacks feature flag indicating a retry limit of > 2 is OK, requested limit: 4 [sri lis 16 11:03:14 2019] ath10k_pci 0000:06:00.0: ath10k_pci ATH10K_DBG_BUFFER: [sri lis 16 11:03:14 2019] ath10k: [0000]: 00000992 13FC0007 60002070 00000010 00000030 004E0001 000009DF 17FC3C2A [sri lis 16 11:03:14 2019] ath10k: [0008]: 61100001 01000004 00010000 14640000 00000001 000009E0 17FC582E 00000003 [sri lis 16 11:03:14 2019] ath10k: [0016]: 0000001E 0000094C 0000094C 00000000 000009E0 17FC582E 00000012 0000001E [sri lis 16 11:03:14 2019] ath10k: [0024]: 0000094C 0000094C 00000000 000009E0 17FC582E 00000045 0000001E 0000094C [sri lis 16 11:03:14 2019] ath10k: [0032]: 0000094C 00000000 000009E0 17FC582E 00000067 0000001E 0000094C 0000094C [sri lis 16 11:03:14 2019] ath10k: [0040]: 00000000 00000A03 17FC3C2A 61100001 01000001 01010000 14640000 00000002 [sri lis 16 11:03:14 2019] ath10k: [0048]: 00000A03 13FC5822 9110B000 00000001 00000001 00000001 00000A04 1400587C [sri lis 16 11:03:14 2019] ath10k: [0056]: 51100001 000EE260 000003FC 00000001 004505F0 00000A04 1000587A 0042CD10 [sri lis 16 11:03:14 2019] ath10k: [0064]: 004505F0 FF000001 00000000 00000A04 14006403 00000000 01000000 00000000 [sri lis 16 11:03:14 2019] ath10k: [0072]: 00000000 004505F0 00000A04 14006402 71103331 00000000 00000100 00000001 [sri lis 16 11:03:14 2019] ath10k: [0080]: 00000000 00000A04 14006402 71103332 00000000 00000100 0042AA08 00000000 [sri lis 16 11:03:14 2019] ath10k: [0088]: 00000A04 1400587D 51100002 000EE260 00000057 00000000 004505F0 00000A04 [sri lis 16 11:03:14 2019] ath10k: [0096]: 1000587B 0042CD10 004505F0 00000000 0042AA08 00000A24 17FC3C2A 61100001 [sri lis 16 11:03:14 2019] ath10k: [0104]: 01000001 01010000 14640000 00000002 00000A24 13FC5822 9110B000 00000001 [sri lis 16 11:03:14 2019] ath10k: [0112]: 00000001 00000001 00000A44 17FC3C2A 61100001 01000001 01010000 14640000 [sri lis 16 11:03:14 2019] ath10k: [0120]: 00000002 00000A44 13FC5822 9110B000 00000001 00000001 00000001 00000A65 [sri lis 16 11:03:14 2019] ath10k: [0128]: 17FC3C2A 61100001 01000001 01010000 14640000 00000002 00000A65 13FC5822 [sri lis 16 11:03:14 2019] ath10k: [0136]: 9110B000 00000001 00000001 00000001 00000A86 17FC3C2A 61100001 01000001 [sri lis 16 11:03:14 2019] ath10k: [0144]: 01010000 14640000 00000002 00000A86 13FC5822 9110B000 00000001 00000001 [sri lis 16 11:03:14 2019] ath10k: [0152]: 00000001 00000AA6 17FC3C2A 61100001 01000001 01010000 14640000 00000002 [sri lis 16 11:03:14 2019] ath10k: [0160]: 00000AA6 13FC5822 9110B000 00000001 00000001 00000001 00000AC7 17FC3C2A [sri lis 16 11:03:14 2019] ath10k: [0168]: 61100001 01000001 01010000 14640000 00000002 00000AC7 13FC5822 9110B000 [sri lis 16 11:03:14 2019] ath10k: [0176]: 00000001 00000001 00000001 00000AE8 17FC3C2A 61100001 01000001 01010000 [sri lis 16 11:03:14 2019] ath10k: [0184]: 14640000 00000002 00000AE8 13FC5822 9110B000 00000001 00000001 00000001 [sri lis 16 11:03:14 2019] ath10k: [0192]: 00000B08 17FC3C2A 61100001 01000001 01010000 14640000 00000002 00000B08 [sri lis 16 11:03:14 2019] ath10k: [0200]: 13FC5822 9110B000 00000001 00000001 00000001 00000B28 17FC3C2A 61100001 [sri lis 16 11:03:14 2019] ath10k: [0208]: 01000001 01010000 14640000 00000002 00000B28 13FC5822 9110B000 00000001 [sri lis 16 11:03:14 2019] ath10k: [0216]: 00000001 00000001 00000B49 17FC3C2A 61100001 01000001 01010000 14640000 [sri lis 16 11:03:14 2019] ath10k: [0224]: 00000002 00000B49 13FC5822 9110B000 00000001 00000001 00000001 00000B69 [sri lis 16 11:03:14 2019] ath10k: [0232]: 17FC3C2A 61100001 01000001 01010000 14640000 00000002 00000B69 13FC5822 [sri lis 16 11:03:14 2019] ath10k: [0240]: 9110B000 00000001 00000001 00000001 00000B6B 1400587C 51100001 000EE260 [sri lis 16 11:03:14 2019] ath10k: [0248]: 000003FC 00000001 004505F0 00000B6B 1400587C 51100001 000EE214 00000408 [sri lis 16 11:03:14 2019] ath10k: [0256]: 00000002 004505F0 00000B6B 1000587A 0042CD10 004505F0 FF010000 00000000 [sri lis 16 11:03:14 2019] ath10k: [0264]: 00000B6B 14006403 4921F004 26440000 00000000 00000001 004505F0 00000B6C [sri lis 16 11:03:14 2019] ath10k: [0272]: 10005881 00003112 0042CD10 00000003 FFFFFFFF 00000B6C 10005881 00003112 [sri lis 16 11:03:14 2019] ath10k: [0280]: 0042CD10 0000000E 00000000 [sri lis 16 11:03:14 2019] ath10k_pci 0000:06:00.0: ATH10K_END [sri lis 16 11:03:19 2019] 0: iter-comb radar-detect-needed: 0x20 combo->radar_detect_widths: 0x0 [sri lis 16 11:03:19 2019] cfg-comb-check: iter-combinations returned num==0 [sri lis 16 11:03:19 2019] wlp6s0: ieee80211_check_combinations: cfg80211-check-combinations failed: -16 [sri lis 16 11:03:19 2019] wlp6s0: vif-use-channel: check-combinations failed: -16 [sri lis 16 11:03:19 2019] wlp6s0: start-radar failed, vif-use-channel check failed: -16 [sri lis 16 11:03:19 2019] start-radar: ops->start-radar-detection failed: -16 [sri lis 16 11:03:19 2019] wlp6s0: do_stop, canceling dfs-cac-timer-work. [sri lis 16 11:03:19 2019] ath10k_pci 0000:06:00.0: peer-unmap-event: unknown peer id 0 [sri lis 16 11:03:21 2019] ath10k_pci 0000:06:00.0: unsupported HTC service id: 1536 [sri lis 16 11:03:21 2019] ath10k_pci 0000:06:00.0: 10.4 wmi init: vdevs: 16 peers: 48 tid: 96 [sri lis 16 11:03:21 2019] ath10k_pci 0000:06:00.0: msdu-desc: 2500 skid: 32 [sri lis 16 11:03:22 2019] ath10k_pci 0000:06:00.0: wmi print 'P 48/48 V 16 K 144 PH 176 T 186 msdu-desc: 2500 sw-crypt: 0 ct-sta: 0' [sri lis 16 11:03:22 2019] ath10k_pci 0000:06:00.0: wmi print 'free: 128804 iram: 23924 sram: 44084' [sri lis 16 11:03:22 2019] ath10k_pci 0000:06:00.0: Firmware lacks feature flag indicating a retry limit of > 2 is OK, requested limit: 4 [sri lis 16 11:03:22 2019] ath10k_pci 0000:06:00.0: ath10k_pci ATH10K_DBG_BUFFER: [sri lis 16 11:03:22 2019] ath10k: [0000]: 00000992 13FC0007 60002070 00000010 00000030 004E0001 000009DD 17FC3C2A [sri lis 16 11:03:22 2019] ath10k: [0008]: 61100001 01000004 00010000 14640000 00000001 000009DE 17FC582E 00000003 [sri lis 16 11:03:22 2019] ath10k: [0016]: 0000001E 0000094C 0000094C 00000000 000009DE 17FC582E 00000012 0000001E [sri lis 16 11:03:22 2019] ath10k: [0024]: 0000094C 0000094C 00000000 000009DE 17FC582E 00000045 0000001E 0000094C [sri lis 16 11:03:22 2019] ath10k: [0032]: 0000094C 00000000 000009DE 17FC582E 00000067 0000001E 0000094C 0000094C [sri lis 16 11:03:22 2019] ath10k: [0040]: 00000000 00000A01 17FC3C2A 61100001 01000001 01010000 14640000 00000002 [sri lis 16 11:03:22 2019] ath10k: [0048]: 00000A01 13FC5822 9110B000 00000001 00000001 00000001 00000A01 1400587C [sri lis 16 11:03:22 2019] ath10k: [0056]: 51100001 000EE260 000003FC 00000001 004505F0 00000A01 1000587A 0042CD10 [sri lis 16 11:03:22 2019] ath10k: [0064]: 004505F0 FF000001 00000000 00000A01 14006403 00000000 01000000 00000000 [sri lis 16 11:03:22 2019] ath10k: [0072]: 00000000 004505F0 00000A01 14006402 71103331 00000000 00000100 00000001 [sri lis 16 11:03:22 2019] ath10k: [0080]: 00000000 00000A01 14006402 71103332 00000000 00000100 0042AA08 00000000 [sri lis 16 11:03:22 2019] ath10k: [0088]: 00000A01 1400587D 51100002 000EE260 00000057 00000000 004505F0 00000A01 [sri lis 16 11:03:22 2019] ath10k: [0096]: 1000587B 0042CD10 004505F0 00000000 0042AA08 00000A22 17FC3C2A 61100001 [sri lis 16 11:03:22 2019] ath10k: [0104]: 01000001 01010000 14640000 00000002 00000A22 13FC5822 9110B000 00000001 [sri lis 16 11:03:22 2019] ath10k: [0112]: 00000001 00000001 00000A43 17FC3C2A 61100001 01000001 01010000 14640000 [sri lis 16 11:03:22 2019] ath10k: [0120]: 00000002 00000A43 13FC5822 9110B000 00000001 00000001 00000001 00000A63 [sri lis 16 11:03:22 2019] ath10k: [0128]: 17FC3C2A 61100001 01000001 01010000 14640000 00000002 00000A63 13FC5822 [sri lis 16 11:03:22 2019] ath10k: [0136]: 9110B000 00000001 00000001 00000001 00000A84 17FC3C2A 61100001 01000001 [sri lis 16 11:03:22 2019] ath10k: [0144]: 01010000 14640000 00000002 00000A84 13FC5822 9110B000 00000001 00000001 [sri lis 16 11:03:22 2019] ath10k: [0152]: 00000001 00000AA4 17FC3C2A 61100001 01000001 01010000 14640000 00000002 [sri lis 16 11:03:22 2019] ath10k: [0160]: 00000AA4 13FC5822 9110B000 00000001 00000001 00000001 00000AC4 17FC3C2A [sri lis 16 11:03:22 2019] ath10k: [0168]: 61100001 01000001 01010000 14640000 00000002 00000AC4 13FC5822 9110B000 [sri lis 16 11:03:22 2019] ath10k: [0176]: 00000001 00000001 00000001 00000AE5 17FC3C2A 61100001 01000001 01010000 [sri lis 16 11:03:22 2019] ath10k: [0184]: 14640000 00000002 00000AE5 13FC5822 9110B000 00000001 00000001 00000001 [sri lis 16 11:03:22 2019] ath10k: [0192]: 00000B05 17FC3C2A 61100001 01000001 01010000 14640000 00000002 00000B05 [sri lis 16 11:03:22 2019] ath10k: [0200]: 13FC5822 9110B000 00000001 00000001 00000001 00000B25 17FC3C2A 61100001 [sri lis 16 11:03:22 2019] ath10k: [0208]: 01000001 01010000 14640000 00000002 00000B25 13FC5822 9110B000 00000001 [sri lis 16 11:03:22 2019] ath10k: [0216]: 00000001 00000001 00000B44 17FC3C2A 61100001 01000001 01010000 14640000 [sri lis 16 11:03:22 2019] ath10k: [0224]: 00000002 00000B44 13FC5822 9110B000 00000001 00000001 00000001 00000B64 [sri lis 16 11:03:22 2019] ath10k: [0232]: 17FC3C2A 61100001 01000001 01010000 14640000 00000002 00000B64 13FC5822 [sri lis 16 11:03:22 2019] ath10k: [0240]: 9110B000 00000001 00000001 00000001 00000B66 1400587C 51100001 000EE260 [sri lis 16 11:03:22 2019] ath10k: [0248]: 000003FC 00000001 004505F0 00000B66 1000587A 0042CD10 004505F0 FF000001 [sri lis 16 11:03:22 2019] ath10k: [0256]: 00000000 00000B66 14006403 00000000 01000000 00000000 00000000 004505F0 [sri lis 16 11:03:22 2019] ath10k: [0264]: 00000B66 10005881 00003112 0042CD10 00000003 FFFFFFFF 00000B66 10005881 [sri lis 16 11:03:22 2019] ath10k: [0272]: 00003112 0042CD10 0000000E 00000000 [sri lis 16 11:03:22 2019] ath10k_pci 0000:06:00.0: ATH10K_END gs@gs-server:~$ date sri, 16.10.2019. 11:03:44 CEST

If you are trying 160Mhz, I fixed a bug with that a week or so ago, maybe you need to re-pull down the kernel if you cloned earlier?

Otherwise, maybe you have regulatory domain issues that are not specifically related to the driver/firmware.

i have the latest linux.ct and driver-ct source. I'm located in Europe, and my WRT3200ACS works on 100 and 36 channel with 160Mhz width. How to confirm out from logs, that i do not have this 160 Mhz solved bug, or regulatory domain issues?

Try using 80Mhz and see if that works.

I pushed a 5.2.21 stable release kernel yesterday, what is the git commit-id head of what you cloned?

The error in your logs looks like the 160Mhz bug I fixed recently.

Thanks, Ben

On 10/16/2019 07:02 AM, gsustek wrote:

i have the latest linux.ct and driver-ct source. I'm located in Europe, and my WRT3200ACS works on 100 and 36 channel with 160Mhz width. How to confirm out from logs, that i do not have this 160 Mhz solved bug, or regulatory domain issues?

— You are receiving this because you commented. Reply to this email directly, view it on GitHub https://github.com/greearb/ath10k-ct/issues/100?email_source=notifications&email_token=AACHNKUX3FX3GVSYEOHXBODQO4NGPA5CNFSM4JBILMR2YY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEBMTENQ#issuecomment-542716470, or unsubscribe https://github.com/notifications/unsubscribe-auth/AACHNKVUQBVYVBW34AGBPIDQO4NGPANCNFSM4JBILMRQ.

-- Ben Greear greearb@candelatech.com Candela Technologies Inc http://www.candelatech.com

i just do: git clone git clone https://github.com/greearb/linux-ct-5.2.git cp /boot/config-uname -r .config yes '' | make oldconfig make -j 2 sudo make modules_install sudo make install reboot to the kernel!

hostpad:sudo -i hostapd -dd /etc/hostapd/hostapd.conf

initiator=1
type=0
alpha2=FR wlp6s0: Event CHANNEL_LIST_CHANGED (27) received Channel list updated - continue setup nl80211: Regulatory information - country=FR (DFS-ETSI) nl80211: 2402-2482 @ 40 MHz 20 mBm nl80211: 5170-5250 @ 80 MHz 20 mBm nl80211: 5250-5330 @ 80 MHz 20 mBm (DFS) nl80211: 5490-5710 @ 160 MHz 27 mBm (DFS) nl80211: 57000-66000 @ 2160 MHz 40 mBm nl80211: Mode IEEE 802.11a: 5180 5200 5220 5240 5260[NO_IR][RADAR] 5280[NO_IR][RADAR] 5300[NO_IR][RADAR] 5320[NO_IR][RADAR] 5500[NO_IR][RADAR] 5520[NO_IR][RADAR] 5540[NO_IR][RADAR] 5560[NO_IR][RADAR] 5580[NO_IR][RADAR] Allowed channel: mode=2 chan=36 freq=5180 MHz max_tx_power=20 dBm Allowed channel: mode=2 chan=40 freq=5200 MHz max_tx_power=20 dBm Allowed channel: mode=2 chan=44 freq=5220 MHz max_tx_power=20 dBm Allowed channel: mode=2 chan=48 freq=5240 MHz max_tx_power=20 dBm Allowed channel: mode=2 chan=52 freq=5260 MHz max_tx_power=20 dBm (DFS state = usable) Allowed channel: mode=2 chan=56 freq=5280 MHz max_tx_power=20 dBm (DFS state = usable) Allowed channel: mode=2 chan=60 freq=5300 MHz max_tx_power=20 dBm (DFS state = usable) Allowed channel: mode=2 chan=64 freq=5320 MHz max_tx_power=20 dBm (DFS state = usable) Allowed channel: mode=2 chan=100 freq=5500 MHz max_tx_power=27 dBm (DFS state = usable) Allowed channel: mode=2 chan=104 freq=5520 MHz max_tx_power=27 dBm (DFS state = usable) Allowed channel: mode=2 chan=108 freq=5540 MHz max_tx_power=27 dBm (DFS state = usable) Allowed channel: mode=2 chan=112 freq=5560 MHz max_tx_power=27 dBm (DFS state = usable) Allowed channel: mode=2 chan=116 freq=5580 MHz max_tx_power=27 dBm (DFS state = usable) Allowed channel: mode=2 chan=120 freq=5600 MHz max_tx_power=27 dBm (DFS state = usable) Allowed channel: mode=2 chan=124 freq=5620 MHz max_tx_power=27 dBm (DFS state = usable) Allowed channel: mode=2 chan=128 freq=5640 MHz max_tx_power=27 dBm (DFS state = usable) Allowed channel: mode=2 chan=132 freq=5660 MHz max_tx_power=27 dBm (DFS state = usable) Allowed channel: mode=2 chan=136 freq=5680 MHz max_tx_power=27 dBm (DFS state = usable) Allowed channel: mode=2 chan=140 freq=5700 MHz max_tx_power=27 dBm (DFS state = usable) Disable HT capability [DSSS_CCK-40] on 5 GHz band hw vht capab: 0x339b79fa, conf vht capab: 0x338818f2 wlp6s0: interface state COUNTRY_UPDATE->HT_SCAN Scan for neighboring BSSes prior to enabling 40 MHz channel 40 MHz affected channel range: [5490,5530] MHz wlp6s0: nl80211: scan request nl80211: Passive scan requested nl80211: Scan frequency 5500 MHz nl80211: Scan frequency 5520 MHz Scan requested (ret=0) - scan timeout 10 seconds Interface initialization will be completed in a callback nl80211: Event message available nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlp6s0 wlp6s0: nl80211: Scan trigger wlp6s0: Event SCAN_STARTED (47) received Unknown event 47 RTM_NEWLINK: ifi_index=7 ifname=wlp6s0 wext ifi_family=0 ifi_flags=0x1003 ([UP]) nl80211: Event message available nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlp6s0 wlp6s0: nl80211: New scan results available nl80211: Scan included frequencies: 5500 5520 wlp6s0: Event SCAN_RESULTS (3) received nl80211: Received scan results (1 BSSes) HT40: control channel: 100 secondary channel: 104 Completing interface initialization Mode: IEEE 802.11a Channel: 100 Frequency: 5500 MHz DFS 8 channels required radar detection DFS all channels available, (SKIP CAC): no DFS 0 chans unavailable - choose other channel: no wlp6s0: interface state HT_SCAN->DFS DFS start CAC on 5500 MHz wlp6s0: DFS-CAC-START freq=5500 chan=100 sec_chan=1, width=2, seg0=114, seg1=0, cac_time=60s nl80211: Start radar detection (CAC) 5500 MHz (ht_enabled=1, vht_enabled=1, he_enabled=0, bandwidth=160 MHz, cf1=5570 MHz, cf2=0 MHz)
- freq=5500
- he_enabled=0
- vht_enabled=1
- ht_enabled=1
- bandwidth=160
- channel_width=5
- center_freq1=5570
- center_freq2=0 nl80211: Failed to start radar detection: -16 (Device or resource busy) DFS start_dfs_cac() failed, -1 Interface initialization failed wlp6s0: interface state DFS->DISABLED wlp6s0: AP-DISABLED hostapd_interface_deinit_free(0x55c14cdcf9b0) hostapd_interface_deinit_free: num_bss=1 conf->num_bss=1 hostapd_interface_deinit(0x55c14cdcf9b0) wlp6s0: interface state DISABLED->DISABLED hostapd_bss_deinit: deinit bss wlp6s0 wlp6s0: Deauthenticate all stations nl80211: send_mlme - da= ff:ff:ff:ff:ff:ff noack=0 freq=0 no_cck=0 offchanok=0 wait_time=0 fc=0xc0 (WLAN_FC_STYPE_DEAUTH) nlmode=3 nl80211: send_mlme -> send_frame nl80211: send_frame - Use bss->freq=0 nl80211: send_frame -> send_frame_cmd nl80211: CMD_FRAME freq=0 wait=0 no_cck=0 no_ack=0 offchanok=0 CMD_FRAME - hexdump(len=26): c0 00 00 00 ff ff ff ff ff ff 04 f0 21 49 44 26 04 f0 21 49 44 26 00 00 03 00 nl80211: Frame command failed: ret=-22 (Invalid argument) (freq=0 wait=0) wlp6s0: AP-DISABLED hostapd_cleanup(hapd=0x55c14cdd0fe0 (wlp6s0)) wlp6s0: CTRL-EVENT-TERMINATING hostapd_free_hapd_data: Interface wlp6s0 wasn't started hostapd_interface_deinit_free: driver=0x55c14ca8d7e0 drv_priv=0x55c14cdd3e00 -> hapd_deinit nl80211: deinit ifname=wlp6s0 disabled_11b_rates=0 nl80211: Remove monitor interface: refcount=0 nl80211: Remove beacon (ifindex=7) netlink: Operstate: ifindex=7 linkmode=0 (kernel-control), operstate=6 (IF_OPER_UP) nl80211: Set mode ifindex 7 iftype 2 (STATION) nl80211: Failed to set interface 7 to mode 2: -16 (Device or resource busy) nl80211: Try mode change after setting interface down nl80211: Set mode ifindex 7 iftype 2 (STATION) nl80211: Mode change succeeded while interface is down nl80211: Teardown AP(wlp6s0) - device_ap_sme=0 use_monitor=0 nl80211: Unsubscribe mgmt frames handle 0x8888dd49c4551f49 (AP teardown) hostapd_interface_free(0x55c14cdcf9b0) hostapd_interface_free: free hapd 0x55c14cdd0fe0 hostapd_cleanup_iface(0x55c14cdcf9b0) hostapd_cleanup_iface_partial(0x55c14cdcf9b0) hostapd_cleanup_iface: free iface=0x55c14cdcf9b0

dmesg

[sri lis 16 21:33:52 2019] ath10k 5.1 driver, optimized for CT firmware, probing pci device: 0x46. [sri lis 16 21:33:52 2019] ath10k_pci 0000:06:00.0: enabling device (0000 -> 0002) [sri lis 16 21:33:52 2019] ath10k_pci 0000:06:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0 [sri lis 16 21:33:52 2019] wl: loading out-of-tree module taints kernel. [sri lis 16 21:33:52 2019] wl: module license 'MIXED/Proprietary' taints kernel. [sri lis 16 21:33:52 2019] Disabling lock debugging due to kernel taint [sri lis 16 21:33:52 2019] wl: module verification failed: signature and/or required key missing - tainting kernel [sri lis 16 21:33:52 2019] ath10k_pci 0000:06:00.0: qca9984/qca9994 hw1.0 target 0x01000000 chip_id 0x00000000 sub 168c:cafe [sri lis 16 21:33:52 2019] ath10k_pci 0000:06:00.0: kconfig debug 0 debugfs 1 tracing 1 dfs 0 testmode 0 [sri lis 16 21:33:52 2019] ath10k_pci 0000:06:00.0: firmware ver 10.4b-ct-9984-xtH-012-e747272a4 api 5 features mfp,peer-flow-ctrl,txstatus-noack,wmi-10.x-CT,rxswcrypt-CT,ratemask-CT,regdump-CT,txrate-CT,flush-all-CT,pingpong-CT,ch-regs-CT,nop-CT,htt-mgt-CT,set-special-CT,no-bmiss-CT,tx-rc-CT,cust-stats-CT,CT-STA,txrate2-CT,beacon-cb-CT,wmi-block-ack-CT,wmi-bcn-rc-CT crc32 c34f0b8a [sri lis 16 21:33:52 2019] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002) [sri lis 16 21:33:53 2019] checking generic (c0000000 1e0000) vs hw (c0000000 10000000) [sri lis 16 21:33:53 2019] fb0: switching to inteldrmfb from EFI VGA [sri lis 16 21:33:53 2019] Console: switching to colour dummy device 80x25 [sri lis 16 21:33:53 2019] i915 0000:00:02.0: vgaarb: deactivate vga console [sri lis 16 21:33:53 2019] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [sri lis 16 21:33:53 2019] [drm] Driver supports precise vblank timestamp query. [sri lis 16 21:33:53 2019] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [sri lis 16 21:33:53 2019] [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4) [sri lis 16 21:33:53 2019] intel_rapl: Found RAPL domain package [sri lis 16 21:33:53 2019] intel_rapl: Found RAPL domain core [sri lis 16 21:33:53 2019] intel_rapl: Found RAPL domain uncore [sri lis 16 21:33:53 2019] intel_rapl: Found RAPL domain dram [sri lis 16 21:33:53 2019] ath10k_pci 0000:06:00.0: board_file api 2 bmi_id 0:31 crc32 e807b522 [sri lis 16 21:33:53 2019] [drm] failed to retrieve link info, disabling eDP [sri lis 16 21:33:53 2019] [drm] Initialized i915 1.6.0 20190417 for 0000:00:02.0 on minor 0 [sri lis 16 21:33:53 2019] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [sri lis 16 21:33:53 2019] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7 [sri lis 16 21:33:53 2019] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [sri lis 16 21:33:53 2019] fbcon: i915drmfb (fb0) is primary device [sri lis 16 21:33:53 2019] Console: switching to colour frame buffer device 160x45 [sri lis 16 21:33:53 2019] i915 0000:00:02.0: fb0: i915drmfb frame buffer device [sri lis 16 21:33:53 2019] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8 [sri lis 16 21:33:53 2019] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9 [sri lis 16 21:33:53 2019] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input10 [sri lis 16 21:33:53 2019] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11 [sri lis 16 21:33:53 2019] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12 [sri lis 16 21:33:54 2019] audit: type=1400 audit(1571254435.292:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=599 comm="apparmor_parser" [sri lis 16 21:33:54 2019] audit: type=1400 audit(1571254435.316:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=601 comm="apparmor_parser" [sri lis 16 21:33:54 2019] audit: type=1400 audit(1571254435.316:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=601 comm="apparmor_parser" [sri lis 16 21:33:54 2019] audit: type=1400 audit(1571254435.324:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/dhcpd" pid=602 comm="apparmor_parser" [sri lis 16 21:33:54 2019] audit: type=1400 audit(1571254435.328:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ippusbxd" pid=606 comm="apparmor_parser" [sri lis 16 21:33:54 2019] audit: type=1400 audit(1571254435.336:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=607 comm="apparmor_parser" [sri lis 16 21:33:54 2019] audit: type=1400 audit(1571254435.344:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=609 comm="apparmor_parser" [sri lis 16 21:33:54 2019] audit: type=1400 audit(1571254435.344:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=609 comm="apparmor_parser" [sri lis 16 21:33:54 2019] audit: type=1400 audit(1571254435.360:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=610 comm="apparmor_parser" [sri lis 16 21:33:54 2019] audit: type=1400 audit(1571254435.360:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=610 comm="apparmor_parser" [sri lis 16 21:33:56 2019] ath10k_pci 0000:06:00.0: unsupported HTC service id: 1536 [sri lis 16 21:33:56 2019] ath10k_pci 0000:06:00.0: 10.4 wmi init: vdevs: 16 peers: 48 tid: 96 [sri lis 16 21:33:56 2019] ath10k_pci 0000:06:00.0: msdu-desc: 2500 skid: 32 [sri lis 16 21:33:56 2019] ath10k_pci 0000:06:00.0: wmi print 'P 48/48 V 16 K 144 PH 176 T 186 msdu-desc: 2500 sw-crypt: 0 ct-sta: 0' [sri lis 16 21:33:56 2019] ath10k_pci 0000:06:00.0: wmi print 'free: 128804 iram: 23924 sram: 44084' [sri lis 16 21:33:56 2019] ath10k_pci 0000:06:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal otp max-sta 32 raw 0 hwcrypto 1 [sri lis 16 21:33:56 2019] ath: EEPROM regdomain: 0x0, reg-addr: 00000000e1c6a8fc [sri lis 16 21:33:56 2019] ath: EEPROM indicates default country code should be used [sri lis 16 21:33:56 2019] ath: doing EEPROM country->regdmn map search [sri lis 16 21:33:56 2019] ath: country maps to regdmn code: 0x3a [sri lis 16 21:33:56 2019] ath: Country alpha2 being used: US [sri lis 16 21:33:56 2019] ath: Regpair used: 0x3a [sri lis 16 21:33:56 2019] ath: ath: Not applying default regdom, alpha2: US [sri lis 16 21:33:56 2019] cfg80211: Setting DFS Master region in update_regulatory, was: 00 unset, new: 00 unset lr: 0000000007ac58ec regdom: 00000000fa1fc369 [sri lis 16 21:33:56 2019] cfg80211: wiphy 04:f0:21:49:44:26: Disabling freq 5845 MHz (regdom-not-set-by-driver) [sri lis 16 21:33:56 2019] cfg80211: wiphy 04:f0:21:49:44:26: Disabling freq 5865 MHz (regdom-not-set-by-driver) [sri lis 16 21:33:57 2019] cfg80211: Setting DFS Master region in update_regulatory, was: US unset, new: US FCC lr: 000000003c9c0a4f regdom: 000000006e44073f [sri lis 16 21:33:57 2019] cfg80211: wiphy 04:f0:21:49:44:26: Disabling freq 5845 MHz (regdom-not-set-by-driver) [sri lis 16 21:33:57 2019] cfg80211: wiphy 04:f0:21:49:44:26: Disabling freq 5865 MHz (regdom-not-set-by-driver) [sri lis 16 21:33:57 2019] ath10k_pci 0000:06:00.0 wlp6s0: renamed from wlan0 [sri lis 16 21:34:04 2019] rfkill: input handler disabled [sri lis 16 21:34:07 2019] rfkill: input handler enabled [sri lis 16 21:34:11 2019] rfkill: input handler disabled [sri lis 16 21:34:33 2019] ath10k_pci 0000:06:00.0: unsupported HTC service id: 1536 [sri lis 16 21:34:33 2019] ath10k_pci 0000:06:00.0: 10.4 wmi init: vdevs: 16 peers: 48 tid: 96 [sri lis 16 21:34:33 2019] ath10k_pci 0000:06:00.0: msdu-desc: 2500 skid: 32 [sri lis 16 21:34:33 2019] ath10k_pci 0000:06:00.0: wmi print 'P 48/48 V 16 K 144 PH 176 T 186 msdu-desc: 2500 sw-crypt: 0 ct-sta: 0' [sri lis 16 21:34:33 2019] ath10k_pci 0000:06:00.0: wmi print 'free: 128804 iram: 23924 sram: 44084' [sri lis 16 21:34:33 2019] ath10k_pci 0000:06:00.0: Firmware lacks feature flag indicating a retry limit of > 2 is OK, requested limit: 4 [sri lis 16 21:34:34 2019] ath10k_pci 0000:06:00.0: NOTE: Firmware DBGLOG output disabled in debug_mask: 0x10000000 [sri lis 16 21:34:36 2019] igb 0000:01:00.0 enp1s0: igb: enp1s0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX [sri lis 16 21:34:37 2019] IPv6: ADDRCONF(NETDEV_CHANGE): enp1s0: link becomes ready [sri lis 16 21:35:29 2019] ath10k_pci 0000:06:00.0: Setting debug-mask to: 0xc0000032 old: 0x10000000 [sri lis 16 21:35:40 2019] wlp6s0: do_stop, canceling dfs-cac-timer-work. [sri lis 16 21:35:43 2019] ath10k_pci 0000:06:00.0: unsupported HTC service id: 1536 [sri lis 16 21:35:43 2019] ath10k_pci 0000:06:00.0: 10.4 wmi init: vdevs: 16 peers: 48 tid: 96 [sri lis 16 21:35:43 2019] ath10k_pci 0000:06:00.0: msdu-desc: 2500 skid: 32 [sri lis 16 21:35:43 2019] ath10k_pci 0000:06:00.0: wmi print 'P 48/48 V 16 K 144 PH 176 T 186 msdu-desc: 2500 sw-crypt: 0 ct-sta: 0' [sri lis 16 21:35:43 2019] ath10k_pci 0000:06:00.0: wmi print 'free: 128804 iram: 23924 sram: 44084' [sri lis 16 21:35:43 2019] ath10k_pci 0000:06:00.0: Firmware lacks feature flag indicating a retry limit of > 2 is OK, requested limit: 4 [sri lis 16 21:35:43 2019] cfg80211: Setting DFS Master region in update_regulatory, was: FR unset, new: FR ETSI lr: 00000000bee2ef57 regdom: 00000000c0b60158 [sri lis 16 21:35:43 2019] cfg80211: wiphy 04:f0:21:49:44:26: Disabling freq 5720 MHz (regdom-not-set-by-driver) [sri lis 16 21:35:43 2019] cfg80211: wiphy 04:f0:21:49:44:26: Disabling freq 5745 MHz (regdom-not-set-by-driver) [sri lis 16 21:35:43 2019] cfg80211: wiphy 04:f0:21:49:44:26: Disabling freq 5765 MHz (regdom-not-set-by-driver) [sri lis 16 21:35:43 2019] cfg80211: wiphy 04:f0:21:49:44:26: Disabling freq 5785 MHz (regdom-not-set-by-driver) [sri lis 16 21:35:43 2019] cfg80211: wiphy 04:f0:21:49:44:26: Disabling freq 5805 MHz (regdom-not-set-by-driver) [sri lis 16 21:35:43 2019] cfg80211: wiphy 04:f0:21:49:44:26: Disabling freq 5825 MHz (regdom-not-set-by-driver) [sri lis 16 21:35:43 2019] cfg80211: wiphy 04:f0:21:49:44:26: Disabling freq 5845 MHz (regdom-not-set-by-driver) [sri lis 16 21:35:43 2019] cfg80211: wiphy 04:f0:21:49:44:26: Disabling freq 5865 MHz (regdom-not-set-by-driver) [sri lis 16 21:35:44 2019] 0: iter-comb radar-detect-needed: 0x20 combo->radar_detect_widths: 0x0 [sri lis 16 21:35:44 2019] cfg-comb-check: iter-combinations returned num==0 [sri lis 16 21:35:44 2019] wlp6s0: ieee80211_check_combinations: cfg80211-check-combinations failed: -16 [sri lis 16 21:35:44 2019] wlp6s0: vif-use-channel: check-combinations failed: -16 [sri lis 16 21:35:44 2019] wlp6s0: start-radar failed, vif-use-channel check failed: -16 [sri lis 16 21:35:44 2019] start-radar: ops->start-radar-detection failed: -16 [sri lis 16 21:35:44 2019] wlp6s0: do_stop, canceling dfs-cac-timer-work. [sri lis 16 21:35:44 2019] ath10k_pci 0000:06:00.0: peer-unmap-event: unknown peer id 0 [sri lis 16 21:35:46 2019] ath10k_pci 0000:06:00.0: unsupported HTC service id: 1536 [sri lis 16 21:35:46 2019] ath10k_pci 0000:06:00.0: 10.4 wmi init: vdevs: 16 peers: 48 tid: 96 [sri lis 16 21:35:46 2019] ath10k_pci 0000:06:00.0: msdu-desc: 2500 skid: 32 [sri lis 16 21:35:46 2019] ath10k_pci 0000:06:00.0: wmi print 'P 48/48 V 16 K 144 PH 176 T 186 msdu-desc: 2500 sw-crypt: 0 ct-sta: 0' [sri lis 16 21:35:46 2019] ath10k_pci 0000:06:00.0: wmi print 'free: 128804 iram: 23924 sram: 44084' [sri lis 16 21:35:47 2019] ath10k_pci 0000:06:00.0: Firmware lacks feature flag indicating a retry limit of > 2 is OK, requested limit: 4 [sri lis 16 21:35:47 2019] ath10k_pci 0000:06:00.0: ath10k_pci ATH10K_DBG_BUFFER: [sri lis 16 21:35:47 2019] ath10k: [0000]: 00000993 13FC0007 60002070 00000010 00000030 004E0001 000009E0 17FC3C2A [sri lis 16 21:35:47 2019] ath10k: [0008]: 61100001 01000004 00010000 14640000 00000001 000009E1 17FC582E 00000003 [sri lis 16 21:35:47 2019] ath10k: [0016]: 0000001E 0000094C 0000094C 00000000 000009E1 17FC582E 00000012 0000001E [sri lis 16 21:35:47 2019] ath10k: [0024]: 0000094C 0000094C 00000000 000009E1 17FC582E 00000045 0000001E 0000094C [sri lis 16 21:35:47 2019] ath10k: [0032]: 0000094C 00000000 000009E1 17FC582E 00000067 0000001E 0000094C 0000094C [sri lis 16 21:35:47 2019] ath10k: [0040]: 00000000 00000A04 17FC3C2A 61100001 01000001 01010000 14640000 00000002 [sri lis 16 21:35:47 2019] ath10k: [0048]: 00000A04 13FC5822 9110B000 00000001 00000001 00000001 00000A04 1400587C [sri lis 16 21:35:47 2019] ath10k: [0056]: 51100001 000EE260 000003FC 00000001 004505F0 00000A04 1000587A 0042CD10 [sri lis 16 21:35:47 2019] ath10k: [0064]: 004505F0 FF000001 00000000 00000A04 14006403 00000000 01000000 00000000 [sri lis 16 21:35:47 2019] ath10k: [0072]: 00000000 004505F0 00000A04 14006402 71103331 00000000 00000100 00000001 [sri lis 16 21:35:47 2019] ath10k: [0080]: 00000000 00000A04 14006402 71103332 00000000 00000100 0042AA08 00000000 [sri lis 16 21:35:47 2019] ath10k: [0088]: 00000A04 1400587D 51100002 000EE260 00000057 00000000 004505F0 00000A04 [sri lis 16 21:35:47 2019] ath10k: [0096]: 1000587B 0042CD10 004505F0 00000000 0042AA08 00000A25 17FC3C2A 61100001 [sri lis 16 21:35:47 2019] ath10k: [0104]: 01000001 01010000 14640000 00000002 00000A25 13FC5822 9110B000 00000001 [sri lis 16 21:35:47 2019] ath10k: [0112]: 00000001 00000001 00000A45 17FC3C2A 61100001 01000001 01010000 14640000 [sri lis 16 21:35:47 2019] ath10k: [0120]: 00000002 00000A45 13FC5822 9110B000 00000001 00000001 00000001 00000A66 [sri lis 16 21:35:47 2019] ath10k: [0128]: 17FC3C2A 61100001 01000001 01010000 14640000 00000002 00000A66 13FC5822 [sri lis 16 21:35:47 2019] ath10k: [0136]: 9110B000 00000001 00000001 00000001 00000A85 17FC3C2A 61100001 01000001 [sri lis 16 21:35:47 2019] ath10k: [0144]: 01010000 14640000 00000002 00000A85 13FC5822 9110B000 00000001 00000001 [sri lis 16 21:35:47 2019] ath10k: [0152]: 00000001 00000AA6 17FC3C2A 61100001 01000001 01010000 14640000 00000002 [sri lis 16 21:35:47 2019] ath10k: [0160]: 00000AA6 13FC5822 9110B000 00000001 00000001 00000001 00000AC6 17FC3C2A [sri lis 16 21:35:47 2019] ath10k: [0168]: 61100001 01000001 01010000 14640000 00000002 00000AC6 13FC5822 9110B000 [sri lis 16 21:35:47 2019] ath10k: [0176]: 00000001 00000001 00000001 00000AE7 17FC3C2A 61100001 01000001 01010000 [sri lis 16 21:35:47 2019] ath10k: [0184]: 14640000 00000002 00000AE7 13FC5822 9110B000 00000001 00000001 00000001 [sri lis 16 21:35:47 2019] ath10k: [0192]: 00000B07 17FC3C2A 61100001 01000001 01010000 14640000 00000002 00000B07 [sri lis 16 21:35:47 2019] ath10k: [0200]: 13FC5822 9110B000 00000001 00000001 00000001 00000B28 17FC3C2A 61100001 [sri lis 16 21:35:47 2019] ath10k: [0208]: 01000001 01010000 14640000 00000002 00000B28 13FC5822 9110B000 00000001 [sri lis 16 21:35:47 2019] ath10k: [0216]: 00000001 00000001 00000B48 17FC3C2A 61100001 01000001 01010000 14640000 [sri lis 16 21:35:47 2019] ath10k: [0224]: 00000002 00000B48 13FC5822 9110B000 00000001 00000001 00000001 00000B69 [sri lis 16 21:35:47 2019] ath10k: [0232]: 17FC3C2A 61100001 01000001 01010000 14640000 00000002 00000B69 13FC5822 [sri lis 16 21:35:47 2019] ath10k: [0240]: 9110B000 00000001 00000001 00000001 00000B6A 1400587C 51100001 000EE260 [sri lis 16 21:35:47 2019] ath10k: [0248]: 000003FC 00000001 004505F0 00000B6A 1000587A 0042CD10 004505F0 FF000001 [sri lis 16 21:35:47 2019] ath10k: [0256]: 00000000 00000B6B 14006403 00000000 01000000 00000000 00000000 004505F0 [sri lis 16 21:35:47 2019] ath10k: [0264]: 00000B6B 10005881 00003112 0042CD10 00000003 FFFFFFFF 00000B6B 10005881 [sri lis 16 21:35:47 2019] ath10k: [0272]: 00003112 0042CD10 0000000E 00000000 [sri lis 16 21:35:47 2019] ath10k_pci 0000:06:00.0: ATH10K_END

gs@gs-server:~/Music/linux-ct-5.2$ git rev-parse HEAD 56b6398df85ba4610f33dfa6d0fa8351fb4285e6

VHT80 hostpad - conf

sudo cat /etc/hostapd/hostapd.conf

For more options, please visit the following:

https://w1.fi/cgit/hostap/plain/hostapd/hostapd.conf

driver=nl80211 logger_syslog=-1 logger_syslog_level=2 logger_stdout=-1 logger_stdout_level=2

a=5GHz, g=2.4GHz

hw_mode=a

channel=0 turns on ACS survey

channel=100

Please take the following into consideration:

Country code (ISO/IEC 3166-1). Used to set regulatory domain.

Set as needed to indicate country in which device is operating.

This can limit available channels and transmit power.

country_code=AU

Enable IEEE 802.11d. This advertises the country_code and the set of allowed

channels and transmit power levels based on the regulatory limits. The

country_code setting must be configured with the correct country for

IEEE 802.11d functions.

(default: 0 = disabled)

ieee80211d=1

Enable IEEE 802.11h. This enables radar detection and DFS support if

available. DFS support is required on outdoor 5 GHz channels in most countries

of the world. This can be used only with ieee80211d=1.

(default: 0 = disabled)

ieee80211h=1 interface=wlp6s0 ctrl_interface=/var/run/hostapd ctrl_interface_group=0 disassoc_low_ack=1 preamble=1 wmm_enabled=1 macaddr_acl=0 auth_algs=1 ignore_broadcast_ssid=0

Put a 3 here if you want both WPA/WPA2

wpa=2 wpa_passphrase=Ciganja01! wpa_key_mgmt=WPA-PSK wpa_pairwise=TKIP rsn_pairwise=CCMP ssid=test-ssid ieee80211n=1 ht_capab=[HT40+][LDPC][SHORT-GI-20][SHORT-GI-40][TX-STBC][RX-STBC1][DSSS_CCK-40] ieee80211ac=1 vht_oper_chwidth=1 vht_oper_centr_freq_seg0_idx=155 vht_capab=[RXLDPC][SHORT-GI-80][SHORT-GI-160][TX-STBC-2BY1][SU-BEAMFORMER][SU-BEAMFORMEE][MU-BEAMFORMER][MU-BEAMFORMEE][RX-ANTENNA-PATTERN][TX-ANTENNA-PATTERN][RX-STBC1][MAX-MPDU-11454][MAX-A-MPDU-LEN-EXP7]

VHT80Mhz - DFS: working

sudo -i hostapd -dd /etc/hostapd/hostapd.conf random: getrandom() support available Configuration file: /etc/hostapd/hostapd.conf ctrl_interface_group=0 nl80211: Supported cipher 00-0f-ac:1 nl80211: Supported cipher 00-0f-ac:5 nl80211: Supported cipher 00-0f-ac:2 nl80211: Supported cipher 00-0f-ac:4 nl80211: Supported cipher 00-0f-ac:6 nl80211: Supported cipher 00-0f-ac:13 nl80211: Supported cipher 00-0f-ac:11 nl80211: Supported cipher 00-0f-ac:12 nl80211: Supported cipher 00-0f-ac:8 nl80211: Supported cipher 00-0f-ac:9 nl80211: Supported cipher 00-0f-ac:10 nl80211: Using driver-based off-channel TX nl80211: Driver-advertised extended capabilities (default) - hexdump(len=8): 04 00 00 00 00 00 00 40 nl80211: Driver-advertised extended capabilities mask (default) - hexdump(len=8): 04 00 00 00 00 00 00 40 nl80211: use P2P_DEVICE support nl80211: interface wlp6s0 in phy phy0 nl80211: Set mode ifindex 7 iftype 3 (AP) nl80211: Failed to set interface 7 to mode 3: -16 (Device or resource busy) nl80211: Try mode change after setting interface down nl80211: Set mode ifindex 7 iftype 3 (AP) nl80211: Mode change succeeded while interface is down nl80211: Setup AP(wlp6s0) - device_ap_sme=0 use_monitor=0 nl80211: Subscribe to mgmt frames with AP handle 0x5583ef41f7c0 nl80211: Register frame type=0xb0 (WLAN_FC_STYPE_AUTH) nl_handle=0x5583ef41f7c0 match= nl80211: Register frame type=0x0 (WLAN_FC_STYPE_ASSOC_REQ) nl_handle=0x5583ef41f7c0 match= nl80211: Register frame type=0x20 (WLAN_FC_STYPE_REASSOC_REQ) nl_handle=0x5583ef41f7c0 match= nl80211: Register frame type=0xa0 (WLAN_FC_STYPE_DISASSOC) nl_handle=0x5583ef41f7c0 match= nl80211: Register frame type=0xc0 (WLAN_FC_STYPE_DEAUTH) nl_handle=0x5583ef41f7c0 match= nl80211: Register frame type=0x40 (WLAN_FC_STYPE_PROBE_REQ) nl_handle=0x5583ef41f7c0 match= nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x5583ef41f7c0 match=04 nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x5583ef41f7c0 match=0501 nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x5583ef41f7c0 match=0503 nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x5583ef41f7c0 match=0504 nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x5583ef41f7c0 match=06 nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x5583ef41f7c0 match=08 nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x5583ef41f7c0 match=09 nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x5583ef41f7c0 match=0a nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x5583ef41f7c0 match=11 nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x5583ef41f7c0 match=12 nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x5583ef41f7c0 match=7f rfkill: initial event: idx=0 type=1 op=0 soft=0 hard=0 nl80211: Add own interface ifindex 7 (ifidx_reason -1) nl80211: if_indices[16]: 7(-1) phy: phy0 BSS count 1, BSSID mask 00:00:00:00:00:00 (0 bits) wlp6s0: interface state UNINITIALIZED->COUNTRY_UPDATE Previous country code AU, new country code AU nl80211: Regulatory information - country=AU (DFS-ETSI) nl80211: 2400-2483 @ 40 MHz 36 mBm nl80211: 5150-5250 @ 80 MHz 23 mBm (no outdoor) nl80211: 5250-5350 @ 80 MHz 20 mBm (no outdoor) (DFS) nl80211: 5470-5600 @ 80 MHz 27 mBm (DFS) nl80211: 5650-5730 @ 80 MHz 27 mBm (DFS) nl80211: 5730-5850 @ 80 MHz 36 mBm nl80211: 57000-66000 @ 2160 MHz 43 mBm (no outdoor) nl80211: Mode IEEE 802.11a: 5180 5200 5220 5240 5260[NO_IR][RADAR] 5280[NO_IR][RADAR] 5300[NO_IR][RADAR] 5320[NO_IR][RADAR] 5500[NO_IR][RADAR] 5520[NO_IR][RADAR] 5540[NO_IR][RADAR] 5560[NO_IR][RADAR] 5580[NO_IR][RADAR] Allowed channel: mode=2 chan=36 freq=5180 MHz max_tx_power=23 dBm Allowed channel: mode=2 chan=40 freq=5200 MHz max_tx_power=23 dBm Allowed channel: mode=2 chan=44 freq=5220 MHz max_tx_power=23 dBm Allowed channel: mode=2 chan=48 freq=5240 MHz max_tx_power=23 dBm Allowed channel: mode=2 chan=52 freq=5260 MHz max_tx_power=20 dBm (DFS state = usable) Allowed channel: mode=2 chan=56 freq=5280 MHz max_tx_power=20 dBm (DFS state = usable) Allowed channel: mode=2 chan=60 freq=5300 MHz max_tx_power=20 dBm (DFS state = usable) Allowed channel: mode=2 chan=64 freq=5320 MHz max_tx_power=20 dBm (DFS state = usable) Allowed channel: mode=2 chan=100 freq=5500 MHz max_tx_power=27 dBm (DFS state = usable) Allowed channel: mode=2 chan=104 freq=5520 MHz max_tx_power=27 dBm (DFS state = usable) Allowed channel: mode=2 chan=108 freq=5540 MHz max_tx_power=27 dBm (DFS state = usable) Allowed channel: mode=2 chan=112 freq=5560 MHz max_tx_power=27 dBm (DFS state = usable) Allowed channel: mode=2 chan=116 freq=5580 MHz max_tx_power=27 dBm (DFS state = usable) Allowed channel: mode=2 chan=132 freq=5660 MHz max_tx_power=27 dBm (DFS state = usable) Allowed channel: mode=2 chan=136 freq=5680 MHz max_tx_power=27 dBm (DFS state = usable) Allowed channel: mode=2 chan=140 freq=5700 MHz max_tx_power=27 dBm (DFS state = usable) Allowed channel: mode=2 chan=144 freq=5720 MHz max_tx_power=27 dBm (DFS state = usable) Allowed channel: mode=2 chan=149 freq=5745 MHz max_tx_power=36 dBm Allowed channel: mode=2 chan=153 freq=5765 MHz max_tx_power=36 dBm Allowed channel: mode=2 chan=157 freq=5785 MHz max_tx_power=36 dBm Allowed channel: mode=2 chan=161 freq=5805 MHz max_tx_power=36 dBm Allowed channel: mode=2 chan=165 freq=5825 MHz max_tx_power=36 dBm ACS: Automatic channel selection started, this may take a bit ACS: Scanning 1 / 5 wlp6s0: nl80211: scan request nl80211: Passive scan requested nl80211: Scan frequency 5180 MHz nl80211: Scan frequency 5200 MHz nl80211: Scan frequency 5220 MHz nl80211: Scan frequency 5240 MHz nl80211: Scan frequency 5260 MHz nl80211: Scan frequency 5280 MHz nl80211: Scan frequency 5300 MHz nl80211: Scan frequency 5320 MHz nl80211: Scan frequency 5500 MHz nl80211: Scan frequency 5520 MHz nl80211: Scan frequency 5540 MHz nl80211: Scan frequency 5560 MHz nl80211: Scan frequency 5580 MHz nl80211: Scan frequency 5660 MHz nl80211: Scan frequency 5680 MHz nl80211: Scan frequency 5700 MHz nl80211: Scan frequency 5720 MHz nl80211: Scan frequency 5745 MHz nl80211: Scan frequency 5765 MHz nl80211: Scan frequency 5785 MHz nl80211: Scan frequency 5805 MHz nl80211: Scan frequency 5825 MHz Scan requested (ret=0) - scan timeout 10 seconds wlp6s0: interface state COUNTRY_UPDATE->ACS wlp6s0: ACS-STARTED Interface initialization will be completed in a callback (ACS) ctrl_iface not configured! RTM_NEWLINK: ifi_index=7 ifname=wlp6s0 operstate=2 linkmode=0 ifi_family=0 ifi_flags=0x1002 () nl80211: Ignore interface down event since interface wlp6s0 is up RTM_NEWLINK: ifi_index=7 ifname=wlp6s0 operstate=2 linkmode=0 ifi_family=0 ifi_flags=0x1003 ([UP]) nl80211: Event message available nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlp6s0 wlp6s0: nl80211: Scan trigger wlp6s0: Event SCAN_STARTED (47) received Unknown event 47 RTM_NEWLINK: ifi_index=7 ifname=wlp6s0 wext ifi_family=0 ifi_flags=0x1003 ([UP]) nl80211: Event message available nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlp6s0 wlp6s0: nl80211: New scan results available nl80211: Scan included frequencies: 5180 5200 5220 5240 5260 5280 5300 5320 5500 5520 5540 5560 5580 5660 5680 5700 5720 5745 5765 5785 5805 5825 wlp6s0: Event SCAN_RESULTS (3) received ACS: Using survey based algorithm (acs_num_scans=5) nl80211: Fetch survey data nl80211: Freq survey dump event (freq=5180 MHz noise=-105 channel_time=135 busy_time=0 tx_time=0 rx_time=0 filled=0007) nl80211: Freq survey dump event (freq=5200 MHz noise=-105 channel_time=135 busy_time=0 tx_time=0 rx_time=0 filled=0007) nl80211: Freq survey dump event (freq=5220 MHz noise=-106 channel_time=134 busy_time=0 tx_time=0 rx_time=0 filled=0007) nl80211: Freq survey dump event (freq=5240 MHz noise=-106 channel_time=134 busy_time=0 tx_time=0 rx_time=0 filled=0007) nl80211: Freq survey dump event (freq=5260 MHz noise=-106 channel_time=134 busy_time=0 tx_time=0 rx_time=0 filled=0007) nl80211: Freq survey dump event (freq=5280 MHz noise=-105 channel_time=135 busy_time=0 tx_time=0 rx_time=0 filled=0007) nl80211: Freq survey dump event (freq=5300 MHz noise=-105 channel_time=134 busy_time=0 tx_time=0 rx_time=0 filled=0007) nl80211: Freq survey dump event (freq=5320 MHz noise=-105 channel_time=134 busy_time=0 tx_time=0 rx_time=0 filled=0007) nl80211: Freq survey dump event (freq=5500 MHz noise=-104 channel_time=134 busy_time=6 tx_time=0 rx_time=0 filled=0007) nl80211: Freq survey dump event (freq=5520 MHz noise=-103 channel_time=141 busy_time=0 tx_time=0 rx_time=0 filled=0007) nl80211: Freq survey dump event (freq=5540 MHz noise=-104 channel_time=140 busy_time=1 tx_time=0 rx_time=0 filled=0007) nl80211: Freq survey dump event (freq=5560 MHz noise=-103 channel_time=140 busy_time=0 tx_time=0 rx_time=0 filled=0007) nl80211: Freq survey dump event (freq=5580 MHz noise=-103 channel_time=140 busy_time=0 tx_time=0 rx_time=0 filled=0007) nl80211: Freq survey dump event (freq=5660 MHz noise=-103 channel_time=140 busy_time=0 tx_time=0 rx_time=0 filled=0007) nl80211: Freq survey dump event (freq=5680 MHz noise=-103 channel_time=140 busy_time=0 tx_time=0 rx_time=0 filled=0007) nl80211: Freq survey dump event (freq=5700 MHz noise=-103 channel_time=140 busy_time=0 tx_time=0 rx_time=0 filled=0007) nl80211: Freq survey dump event (freq=5720 MHz noise=-102 channel_time=141 busy_time=0 tx_time=0 rx_time=0 filled=0007) nl80211: Freq survey dump event (freq=5745 MHz noise=-103 channel_time=140 busy_time=0 tx_time=0 rx_time=0 filled=0007) nl80211: Freq survey dump event (freq=5765 MHz noise=0 channel_time=21 busy_time=12 tx_time=0 rx_time=0 filled=0007) nl80211: Freq survey dump event (freq=5785 MHz noise=-103 channel_time=139 busy_time=0 tx_time=0 rx_time=0 filled=0007) nl80211: Freq survey dump event (freq=5805 MHz noise=-103 channel_time=140 busy_time=0 tx_time=0 rx_time=0 filled=0007) nl80211: Freq survey dump event (freq=5825 MHz noise=-102 channel_time=139 busy_time=0 tx_time=0 rx_time=0 filled=0007) wlp6s0: Event SURVEY (46) received ACS: Scanning 2 / 5 wlp6s0: nl80211: scan request nl80211: Passive scan requested nl80211: Scan frequency 5180 MHz nl80211: Scan frequency 5200 MHz nl80211: Scan frequency 5220 MHz nl80211: Scan frequency 5240 MHz nl80211: Scan frequency 5260 MHz nl80211: Scan frequency 5280 MHz nl80211: Scan frequency 5300 MHz nl80211: Scan frequency 5320 MHz nl80211: Scan frequency 5500 MHz nl80211: Scan frequency 5520 MHz nl80211: Scan frequency 5540 MHz nl80211: Scan frequency 5560 MHz nl80211: Scan frequency 5580 MHz nl80211: Scan frequency 5660 MHz nl80211: Scan frequency 5680 MHz nl80211: Scan frequency 5700 MHz nl80211: Scan frequency 5720 MHz nl80211: Scan frequency 5745 MHz nl80211: Scan frequency 5765 MHz nl80211: Scan frequency 5785 MHz nl80211: Scan frequency 5805 MHz nl80211: Scan frequency 5825 MHz Scan requested (ret=0) - scan timeout 30 seconds nl80211: Event message available nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlp6s0 wlp6s0: nl80211: Scan trigger wlp6s0: Event SCAN_STARTED (47) received Unknown event 47 RTM_NEWLINK: ifi_index=7 ifname=wlp6s0 wext ifi_family=0 ifi_flags=0x1003 ([UP]) nl80211: Event message available nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlp6s0 wlp6s0: nl80211: New scan results available nl80211: Scan included frequencies: 5180 5200 5220 5240 5260 5280 5300 5320 5500 5520 5540 5560 5580 5660 5680 5700 5720 5745 5765 5785 5805 5825 wlp6s0: Event SCAN_RESULTS (3) received ACS: Using survey based algorithm (acs_num_scans=5) nl80211: Fetch survey data nl80211: Freq survey dump event (freq=5180 MHz noise=-105 channel_time=133 busy_time=0 tx_time=0 rx_time=0 filled=0007) nl80211: Freq survey dump event (freq=5200 MHz noise=-106 channel_time=141 busy_time=0 tx_time=0 rx_time=0 filled=0007) nl80211: Freq survey dump event (freq=5220 MHz noise=-106 channel_time=140 busy_time=0 tx_time=0 rx_time=0 filled=0007) nl80211: Freq survey dump event (freq=5240 MHz noise=-105 channel_time=140 busy_time=0 tx_time=0 rx_time=0 filled=0007) nl80211: Freq survey dump event (freq=5260 MHz noise=-105 channel_time=140 busy_time=0 tx_time=0 rx_time=0 filled=0007) nl80211: Freq survey dump event (freq=5280 MHz noise=-106 channel_time=141 busy_time=0 tx_time=0 rx_time=0 filled=0007) nl80211: Freq survey dump event (freq=5300 MHz noise=-105 channel_time=140 busy_time=0 tx_time=0 rx_time=0 filled=0007) nl80211: Freq survey dump event (freq=5320 MHz noise=-105 channel_time=140 busy_time=0 tx_time=0 rx_time=0 filled=0007) nl80211: Freq survey dump event (freq=5500 MHz noise=-104 channel_time=140 busy_time=2 tx_time=0 rx_time=0 filled=0007) nl80211: Freq survey dump event (freq=5520 MHz noise=-103 channel_time=141 busy_time=0 tx_time=0 rx_time=0 filled=0007) nl80211: Freq survey dump event (freq=5540 MHz noise=-104 channel_time=140 busy_time=0 tx_time=0 rx_time=0 filled=0007) nl80211: Freq survey dump event (freq=5560 MHz noise=-103 channel_time=140 busy_time=0 tx_time=0 rx_time=0 filled=0007) nl80211: Freq survey dump event (freq=5580 MHz noise=-103 channel_time=140 busy_time=0 tx_time=0 rx_time=0 filled=0007) nl80211: Freq survey dump event (freq=5660 MHz noise=-103 channel_time=140 busy_time=0 tx_time=0 rx_time=0 filled=0007) nl80211: Freq survey dump event (freq=5680 MHz noise=-102 channel_time=140 busy_time=0 tx_time=0 rx_time=0 filled=0007) nl80211: Freq survey dump event (freq=5700 MHz noise=-103 channel_time=140 busy_time=0 tx_time=0 rx_time=0 filled=0007) nl80211: Freq survey dump event (freq=5720 MHz noise=-103 channel_time=141 busy_time=0 tx_time=0 rx_time=0 filled=0007) nl80211: Freq survey dump event (freq=5745 MHz noise=-103 channel_time=140 busy_time=0 tx_time=0 rx_time=0 filled=0007) nl80211: Freq survey dump event (freq=5765 MHz noise=0 channel_time=21 busy_time=12 tx_time=0 rx_time=0 filled=0007) nl80211: Freq survey dump event (freq=5785 MHz noise=-103 channel_time=139 busy_time=0 tx_time=0 rx_time=0 filled=0007) nl80211: Freq survey dump event (freq=5805 MHz noise=-103 channel_time=140 busy_time=0 tx_time=0 rx_time=0 filled=0007) nl80211: Freq survey dump event (freq=5825 MHz noise=-104 channel_time=139 busy_time=0 tx_time=0 rx_time=0 filled=0007) wlp6s0: Event SURVEY (46) received ACS: Scanning 3 / 5 wlp6s0: nl80211: scan request nl80211: Passive scan requested nl80211: Scan frequency 5180 MHz nl80211: Scan frequency 5200 MHz nl80211: Scan frequency 5220 MHz nl80211: Scan frequency 5240 MHz nl80211: Scan frequency 5260 MHz nl80211: Scan frequency 5280 MHz nl80211: Scan frequency 5300 MHz nl80211: Scan frequency 5320 MHz nl80211: Scan frequency 5500 MHz nl80211: Scan frequency 5520 MHz nl80211: Scan frequency 5540 MHz nl80211: Scan frequency 5560 MHz nl80211: Scan frequency 5580 MHz nl80211: Scan frequency 5660 MHz nl80211: Scan frequency 5680 MHz nl80211: Scan frequency 5700 MHz nl80211: Scan frequency 5720 MHz nl80211: Scan frequency 5745 MHz nl80211: Scan frequency 5765 MHz nl80211: Scan frequency 5785 MHz nl80211: Scan frequency 5805 MHz nl80211: Scan frequency 5825 MHz Scan requested (ret=0) - scan timeout 30 seconds nl80211: Event message available nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlp6s0 wlp6s0: nl80211: Scan trigger wlp6s0: Event SCAN_STARTED (47) received Unknown event 47 RTM_NEWLINK: ifi_index=7 ifname=wlp6s0 wext ifi_family=0 ifi_flags=0x1003 ([UP]) nl80211: Event message available nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlp6s0 wlp6s0: nl80211: New scan results available nl80211: Scan included frequencies: 5180 5200 5220 5240 5260 5280 5300 5320 5500 5520 5540 5560 5580 5660 5680 5700 5720 5745 5765 5785 5805 5825 wlp6s0: Event SCAN_RESULTS (3) received ACS: Using survey based algorithm (acs_num_scans=5) nl80211: Fetch survey data nl80211: Freq survey dump event (freq=5180 MHz noise=-106 channel_time=141 busy_time=0 tx_time=0 rx_time=0 filled=0007) nl80211: Freq survey dump event (freq=5200 MHz noise=-105 channel_time=141 busy_time=0 tx_time=0 rx_time=0 filled=0007) nl80211: Freq survey dump event (freq=5220 MHz noise=-106 channel_time=140 busy_time=0 tx_time=0 rx_time=0 filled=0007) nl80211: Freq survey dump event (freq=5240 MHz noise=-106 channel_time=140 busy_time=0 tx_time=0 rx_time=0 filled=0007) nl80211: Freq survey dump event (freq=5260 MHz noise=-106 channel_time=140 busy_time=0 tx_time=0 rx_time=0 filled=0007) nl80211: Freq survey dump event (freq=5280 MHz noise=-106 channel_time=141 busy_time=0 tx_time=0 rx_time=0 filled=0007) nl80211: Freq survey dump event (freq=5300 MHz noise=-106 channel_time=140 busy_time=0 tx_time=0 rx_time=0 filled=0007) nl80211: Freq survey dump event (freq=5320 MHz noise=-105 channel_time=140 busy_time=0 tx_time=0 rx_time=0 filled=0007) nl80211: Freq survey dump event (freq=5500 MHz noise=-104 channel_time=140 busy_time=4 tx_time=0 rx_time=0 filled=0007) nl80211: Freq survey dump event (freq=5520 MHz noise=-104 channel_time=141 busy_time=0 tx_time=0 rx_time=0 filled=0007) nl80211: Freq survey dump event (freq=5540 MHz noise=-104 channel_time=140 busy_time=0 tx_time=0 rx_time=0 filled=0007) nl80211: Freq survey dump event (freq=5560 MHz noise=-103 channel_time=140 busy_time=0 tx_time=0 rx_time=0 filled=0007) nl80211: Freq survey dump event (freq=5580 MHz noise=-104 channel_time=140 busy_time=0 tx_time=0 rx_time=0 filled=0007) nl80211: Freq survey dump event (freq=5660 MHz noise=-103 channel_time=140 busy_time=0 tx_time=0 rx_time=0 filled=0007) nl80211: Freq survey dump event (freq=5680 MHz noise=-103 channel_time=140 busy_time=0 tx_time=0 rx_time=0 filled=0007) nl80211: Freq survey dump event (freq=5700 MHz noise=-103 channel_time=140 busy_time=0 tx_time=0 rx_time=0 filled=0007) nl80211: Freq survey dump event (freq=5720 MHz noise=-103 channel_time=141 busy_time=0 tx_time=0 rx_time=0 filled=0007) nl80211: Freq survey dump event (freq=5745 MHz noise=-103 channel_time=140 busy_time=0 tx_time=0 rx_time=0 filled=0007) nl80211: Freq survey dump event (freq=5765 MHz noise=0 channel_time=21 busy_time=12 tx_time=0 rx_time=0 filled=0007) nl80211: Freq survey dump event (freq=5785 MHz noise=-103 channel_time=139 busy_time=0 tx_time=0 rx_time=0 filled=0007) nl80211: Freq survey dump event (freq=5805 MHz noise=-103 channel_time=140 busy_time=0 tx_time=0 rx_time=0 filled=0007) nl80211: Freq survey dump event (freq=5825 MHz noise=-103 channel_time=140 busy_time=0 tx_time=0 rx_time=0 filled=0007) wlp6s0: Event SURVEY (46) received ACS: Scanning 4 / 5 wlp6s0: nl80211: scan request nl80211: Passive scan requested nl80211: Scan frequency 5180 MHz nl80211: Scan frequency 5200 MHz nl80211: Scan frequency 5220 MHz nl80211: Scan frequency 5240 MHz nl80211: Scan frequency 5260 MHz nl80211: Scan frequency 5280 MHz nl80211: Scan frequency 5300 MHz nl80211: Scan frequency 5320 MHz nl80211: Scan frequency 5500 MHz nl80211: Scan frequency 5520 MHz nl80211: Scan frequency 5540 MHz nl80211: Scan frequency 5560 MHz nl80211: Scan frequency 5580 MHz nl80211: Scan frequency 5660 MHz nl80211: Scan frequency 5680 MHz nl80211: Scan frequency 5700 MHz nl80211: Scan frequency 5720 MHz nl80211: Scan frequency 5745 MHz nl80211: Scan frequency 5765 MHz nl80211: Scan frequency 5785 MHz nl80211: Scan frequency 5805 MHz nl80211: Scan frequency 5825 MHz Scan requested (ret=0) - scan timeout 30 seconds nl80211: Event message available nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlp6s0 wlp6s0: nl80211: Scan trigger wlp6s0: Event SCAN_STARTED (47) received Unknown event 47 RTM_NEWLINK: ifi_index=7 ifname=wlp6s0 wext ifi_family=0 ifi_flags=0x1003 ([UP]) nl80211: Event message available nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlp6s0 wlp6s0: nl80211: New scan results available nl80211: Scan included frequencies: 5180 5200 5220 5240 5260 5280 5300 5320 5500 5520 5540 5560 5580 5660 5680 5700 5720 5745 5765 5785 5805 5825 wlp6s0: Event SCAN_RESULTS (3) received ACS: Using survey based algorithm (acs_num_scans=5) nl80211: Fetch survey data nl80211: Freq survey dump event (freq=5180 MHz noise=-106 channel_time=141 busy_time=0 tx_time=0 rx_time=0 filled=0007) nl80211: Freq survey dump event (freq=5200 MHz noise=-106 channel_time=141 busy_time=0 tx_time=0 rx_time=0 filled=0007) nl80211: Freq survey dump event (freq=5220 MHz noise=-106 channel_time=140 busy_time=0 tx_time=0 rx_time=0 filled=0007) nl80211: Freq survey dump event (freq=5240 MHz noise=-106 channel_time=140 busy_time=0 tx_time=0 rx_time=0 filled=0007) nl80211: Freq survey dump event (freq=5260 MHz noise=-106 channel_time=140 busy_time=0 tx_time=0 rx_time=0 filled=0007) nl80211: Freq survey dump event (freq=5280 MHz noise=-106 channel_time=141 busy_time=0 tx_time=0 rx_time=0 filled=0007) nl80211: Freq survey dump event (freq=5300 MHz noise=-106 channel_time=140 busy_time=0 tx_time=0 rx_time=0 filled=0007) nl80211: Freq survey dump event (freq=5320 MHz noise=-105 channel_time=140 busy_time=0 tx_time=0 rx_time=0 filled=0007) nl80211: Freq survey dump event (freq=5500 MHz noise=-104 channel_time=141 busy_time=5 tx_time=0 rx_time=0 filled=0007) nl80211: Freq survey dump event (freq=5520 MHz noise=-104 channel_time=141 busy_time=1 tx_time=0 rx_time=0 filled=0007) nl80211: Freq survey dump event (freq=5540 MHz noise=-103 channel_time=140 busy_time=0 tx_time=0 rx_time=0 filled=0007) nl80211: Freq survey dump event (freq=5560 MHz noise=-103 channel_time=140 busy_time=0 tx_time=0 rx_time=0 filled=0007) nl80211: Freq survey dump event (freq=5580 MHz noise=-103 channel_time=140 busy_time=0 tx_time=0 rx_time=0 filled=0007) nl80211: Freq survey dump event (freq=5660 MHz noise=-103 channel_time=140 busy_time=0 tx_time=0 rx_time=0 filled=0007) nl80211: Freq survey dump event (freq=5680 MHz noise=-103 channel_time=140 busy_time=0 tx_time=0 rx_time=0 filled=0007) nl80211: Freq survey dump event (freq=5700 MHz noise=-104 channel_time=140 busy_time=0 tx_time=0 rx_time=0 filled=0007) nl80211: Freq survey dump event (freq=5720 MHz noise=-103 channel_time=140 busy_time=0 tx_time=0 rx_time=0 filled=0007) nl80211: Freq survey dump event (freq=5745 MHz noise=-103 channel_time=140 busy_time=0 tx_time=0 rx_time=0 filled=0007) nl80211: Freq survey dump event (freq=5765 MHz noise=-100 channel_time=58 busy_time=34 tx_time=0 rx_time=0 filled=0007) nl80211: Freq survey dump event (freq=5785 MHz noise=-103 channel_time=140 busy_time=0 tx_time=0 rx_time=0 filled=0007) nl80211: Freq survey dump event (freq=5805 MHz noise=-103 channel_time=140 busy_time=0 tx_time=0 rx_time=0 filled=0007) nl80211: Freq survey dump event (freq=5825 MHz noise=-103 channel_time=139 busy_time=0 tx_time=0 rx_time=0 filled=0007) wlp6s0: Event SURVEY (46) received ACS: Scanning 5 / 5 wlp6s0: nl80211: scan request nl80211: Passive scan requested nl80211: Scan frequency 5180 MHz nl80211: Scan frequency 5200 MHz nl80211: Scan frequency 5220 MHz nl80211: Scan frequency 5240 MHz nl80211: Scan frequency 5260 MHz nl80211: Scan frequency 5280 MHz nl80211: Scan frequency 5300 MHz nl80211: Scan frequency 5320 MHz nl80211: Scan frequency 5500 MHz nl80211: Scan frequency 5520 MHz nl80211: Scan frequency 5540 MHz nl80211: Scan frequency 5560 MHz nl80211: Scan frequency 5580 MHz nl80211: Scan frequency 5660 MHz nl80211: Scan frequency 5680 MHz nl80211: Scan frequency 5700 MHz nl80211: Scan frequency 5720 MHz nl80211: Scan frequency 5745 MHz nl80211: Scan frequency 5765 MHz nl80211: Scan frequency 5785 MHz nl80211: Scan frequency 5805 MHz nl80211: Scan frequency 5825 MHz Scan requested (ret=0) - scan timeout 30 seconds nl80211: Event message available nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlp6s0 wlp6s0: nl80211: Scan trigger wlp6s0: Event SCAN_STARTED (47) received Unknown event 47 RTM_NEWLINK: ifi_index=7 ifname=wlp6s0 wext ifi_family=0 ifi_flags=0x1003 ([UP]) nl80211: Event message available nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlp6s0 wlp6s0: nl80211: New scan results available nl80211: Scan included frequencies: 5180 5200 5220 5240 5260 5280 5300 5320 5500 5520 5540 5560 5580 5660 5680 5700 5720 5745 5765 5785 5805 5825 wlp6s0: Event SCAN_RESULTS (3) received ACS: Using survey based algorithm (acs_num_scans=5) nl80211: Fetch survey data nl80211: Freq survey dump event (freq=5180 MHz noise=-105 channel_time=141 busy_time=0 tx_time=0 rx_time=0 filled=0007) nl80211: Freq survey dump event (freq=5200 MHz noise=-106 channel_time=141 busy_time=0 tx_time=0 rx_time=0 filled=0007) nl80211: Freq survey dump event (freq=5220 MHz noise=-106 channel_time=140 busy_time=0 tx_time=0 rx_time=0 filled=0007) nl80211: Freq survey dump event (freq=5240 MHz noise=-106 channel_time=140 busy_time=0 tx_time=0 rx_time=0 filled=0007) nl80211: Freq survey dump event (freq=5260 MHz noise=-106 channel_time=140 busy_time=0 tx_time=0 rx_time=0 filled=0007) nl80211: Freq survey dump event (freq=5280 MHz noise=-106 channel_time=141 busy_time=0 tx_time=0 rx_time=0 filled=0007) nl80211: Freq survey dump event (freq=5300 MHz noise=-106 channel_time=140 busy_time=0 tx_time=0 rx_time=0 filled=0007) nl80211: Freq survey dump event (freq=5320 MHz noise=-105 channel_time=140 busy_time=0 tx_time=0 rx_time=0 filled=0007) nl80211: Freq survey dump event (freq=5500 MHz noise=-104 channel_time=141 busy_time=4 tx_time=0 rx_time=0 filled=0007) nl80211: Freq survey dump event (freq=5520 MHz noise=-104 channel_time=141 busy_time=0 tx_time=0 rx_time=0 filled=0007) nl80211: Freq survey dump event (freq=5540 MHz noise=-103 channel_time=140 busy_time=0 tx_time=0 rx_time=0 filled=0007) nl80211: Freq survey dump event (freq=5560 MHz noise=-104 channel_time=140 busy_time=0 tx_time=0 rx_time=0 filled=0007) nl80211: Freq survey dump event (freq=5580 MHz noise=-104 channel_time=140 busy_time=0 tx_time=0 rx_time=0 filled=0007) nl80211: Freq survey dump event (freq=5660 MHz noise=-103 channel_time=140 busy_time=0 tx_time=0 rx_time=0 filled=0007) nl80211: Freq survey dump event (freq=5680 MHz noise=-103 channel_time=140 busy_time=0 tx_time=0 rx_time=0 filled=0007) nl80211: Freq survey dump event (freq=5700 MHz noise=-103 channel_time=140 busy_time=0 tx_time=0 rx_time=0 filled=0007) nl80211: Freq survey dump event (freq=5720 MHz noise=-103 channel_time=140 busy_time=0 tx_time=0 rx_time=0 filled=0007) nl80211: Freq survey dump event (freq=5745 MHz noise=-103 channel_time=140 busy_time=0 tx_time=0 rx_time=0 filled=0007) nl80211: Freq survey dump event (freq=5765 MHz noise=0 channel_time=21 busy_time=12 tx_time=0 rx_time=0 filled=0007) nl80211: Freq survey dump event (freq=5785 MHz noise=-103 channel_time=140 busy_time=23 tx_time=0 rx_time=0 filled=0007) nl80211: Freq survey dump event (freq=5805 MHz noise=-103 channel_time=140 busy_time=0 tx_time=0 rx_time=0 filled=0007) nl80211: Freq survey dump event (freq=5825 MHz noise=-103 channel_time=140 busy_time=0 tx_time=0 rx_time=0 filled=0007) wlp6s0: Event SURVEY (46) received ACS: Trying survey-based ACS ACS: Survey analysis for channel 36 (5180 MHz) ACS: 1: min_nf=-106 interference_factor=1e-21 nf=-105 time=135 busy=0 rx=0 ACS: 2: min_nf=-106 interference_factor=1e-21 nf=-105 time=133 busy=0 rx=0 ACS: 3: min_nf=-106 interference_factor=6.30957e-22 nf=-106 time=141 busy=0 rx=0 ACS: 4: min_nf=-106 interference_factor=6.30957e-22 nf=-106 time=141 busy=0 rx=0 ACS: 5: min_nf=-106 interference_factor=1e-21 nf=-105 time=141 busy=0 rx=0 ACS: interference factor average: 8.52383e-22 ACS: Survey analysis for channel 40 (5200 MHz) ACS: 1: min_nf=-106 interference_factor=1e-21 nf=-105 time=135 busy=0 rx=0 ACS: 2: min_nf=-106 interference_factor=6.30957e-22 nf=-106 time=141 busy=0 rx=0 ACS: 3: min_nf=-106 interference_factor=1e-21 nf=-105 time=141 busy=0 rx=0 ACS: 4: min_nf=-106 interference_factor=6.30957e-22 nf=-106 time=141 busy=0 rx=0 ACS: 5: min_nf=-106 interference_factor=6.30957e-22 nf=-106 time=141 busy=0 rx=0 ACS: interference factor average: 7.78574e-22 ACS: Survey analysis for channel 44 (5220 MHz) ACS: 1: min_nf=-106 interference_factor=6.30957e-22 nf=-106 time=134 busy=0 rx=0 ACS: 2: min_nf=-106 interference_factor=6.30957e-22 nf=-106 time=140 busy=0 rx=0 ACS: 3: min_nf=-106 interference_factor=6.30957e-22 nf=-106 time=140 busy=0 rx=0 ACS: 4: min_nf=-106 interference_factor=6.30957e-22 nf=-106 time=140 busy=0 rx=0 ACS: 5: min_nf=-106 interference_factor=6.30957e-22 nf=-106 time=140 busy=0 rx=0 ACS: interference factor average: 6.30957e-22 ACS: Survey analysis for channel 48 (5240 MHz) ACS: 1: min_nf=-106 interference_factor=6.30957e-22 nf=-106 time=134 busy=0 rx=0 ACS: 2: min_nf=-106 interference_factor=1e-21 nf=-105 time=140 busy=0 rx=0 ACS: 3: min_nf=-106 interference_factor=6.30957e-22 nf=-106 time=140 busy=0 rx=0 ACS: 4: min_nf=-106 interference_factor=6.30957e-22 nf=-106 time=140 busy=0 rx=0 ACS: 5: min_nf=-106 interference_factor=6.30957e-22 nf=-106 time=140 busy=0 rx=0 ACS: interference factor average: 7.04766e-22 ACS: Survey analysis for channel 52 (5260 MHz) ACS: 1: min_nf=-106 interference_factor=6.30957e-22 nf=-106 time=134 busy=0 rx=0 ACS: 2: min_nf=-106 interference_factor=1e-21 nf=-105 time=140 busy=0 rx=0 ACS: 3: min_nf=-106 interference_factor=6.30957e-22 nf=-106 time=140 busy=0 rx=0 ACS: 4: min_nf=-106 interference_factor=6.30957e-22 nf=-106 time=140 busy=0 rx=0 ACS: 5: min_nf=-106 interference_factor=6.30957e-22 nf=-106 time=140 busy=0 rx=0 ACS: interference factor average: 7.04766e-22 ACS: Survey analysis for channel 56 (5280 MHz) ACS: 1: min_nf=-106 interference_factor=1e-21 nf=-105 time=135 busy=0 rx=0 ACS: 2: min_nf=-106 interference_factor=6.30957e-22 nf=-106 time=141 busy=0 rx=0 ACS: 3: min_nf=-106 interference_factor=6.30957e-22 nf=-106 time=141 busy=0 rx=0 ACS: 4: min_nf=-106 interference_factor=6.30957e-22 nf=-106 time=141 busy=0 rx=0 ACS: 5: min_nf=-106 interference_factor=6.30957e-22 nf=-106 time=141 busy=0 rx=0 ACS: interference factor average: 7.04766e-22 ACS: Survey analysis for channel 60 (5300 MHz) ACS: 1: min_nf=-106 interference_factor=1e-21 nf=-105 time=134 busy=0 rx=0 ACS: 2: min_nf=-106 interference_factor=1e-21 nf=-105 time=140 busy=0 rx=0 ACS: 3: min_nf=-106 interference_factor=6.30957e-22 nf=-106 time=140 busy=0 rx=0 ACS: 4: min_nf=-106 interference_factor=6.30957e-22 nf=-106 time=140 busy=0 rx=0 ACS: 5: min_nf=-106 interference_factor=6.30957e-22 nf=-106 time=140 busy=0 rx=0 ACS: interference factor average: 7.78574e-22 ACS: Survey analysis for channel 64 (5320 MHz) ACS: 1: min_nf=-105 interference_factor=1e-21 nf=-105 time=134 busy=0 rx=0 ACS: 2: min_nf=-105 interference_factor=1e-21 nf=-105 time=140 busy=0 rx=0 ACS: 3: min_nf=-105 interference_factor=1e-21 nf=-105 time=140 busy=0 rx=0 ACS: 4: min_nf=-105 interference_factor=1e-21 nf=-105 time=140 busy=0 rx=0 ACS: 5: min_nf=-105 interference_factor=1e-21 nf=-105 time=140 busy=0 rx=0 ACS: interference factor average: 1e-21 ACS: Survey analysis for channel 100 (5500 MHz) ACS: 1: min_nf=-104 interference_factor=0.0447761 nf=-104 time=134 busy=6 rx=0 ACS: 2: min_nf=-104 interference_factor=0.0142857 nf=-104 time=140 busy=2 rx=0 ACS: 3: min_nf=-104 interference_factor=0.0285714 nf=-104 time=140 busy=4 rx=0 ACS: 4: min_nf=-104 interference_factor=0.035461 nf=-104 time=141 busy=5 rx=0 ACS: 5: min_nf=-104 interference_factor=0.0283688 nf=-104 time=141 busy=4 rx=0 ACS: interference factor average: 0.0302926 ACS: Survey analysis for channel 104 (5520 MHz) ACS: 1: min_nf=-104 interference_factor=2.51189e-21 nf=-103 time=141 busy=0 rx=0 ACS: 2: min_nf=-104 interference_factor=2.51189e-21 nf=-103 time=141 busy=0 rx=0 ACS: 3: min_nf=-104 interference_factor=1.58489e-21 nf=-104 time=141 busy=0 rx=0 ACS: 4: min_nf=-104 interference_factor=0.0070922 nf=-104 time=141 busy=1 rx=0 ACS: 5: min_nf=-104 interference_factor=1.58489e-21 nf=-104 time=141 busy=0 rx=0 ACS: interference factor average: 0.00141844 ACS: Survey analysis for channel 108 (5540 MHz) ACS: 1: min_nf=-104 interference_factor=0.00714286 nf=-104 time=140 busy=1 rx=0 ACS: 2: min_nf=-104 interference_factor=1.58489e-21 nf=-104 time=140 busy=0 rx=0 ACS: 3: min_nf=-104 interference_factor=1.58489e-21 nf=-104 time=140 busy=0 rx=0 ACS: 4: min_nf=-104 interference_factor=2.51189e-21 nf=-103 time=140 busy=0 rx=0 ACS: 5: min_nf=-104 interference_factor=2.51189e-21 nf=-103 time=140 busy=0 rx=0 ACS: interference factor average: 0.00142857 ACS: Survey analysis for channel 112 (5560 MHz) ACS: 1: min_nf=-104 interference_factor=2.51189e-21 nf=-103 time=140 busy=0 rx=0 ACS: 2: min_nf=-104 interference_factor=2.51189e-21 nf=-103 time=140 busy=0 rx=0 ACS: 3: min_nf=-104 interference_factor=2.51189e-21 nf=-103 time=140 busy=0 rx=0 ACS: 4: min_nf=-104 interference_factor=2.51189e-21 nf=-103 time=140 busy=0 rx=0 ACS: 5: min_nf=-104 interference_factor=1.58489e-21 nf=-104 time=140 busy=0 rx=0 ACS: interference factor average: 2.32649e-21 ACS: Survey analysis for channel 116 (5580 MHz) ACS: 1: min_nf=-104 interference_factor=2.51189e-21 nf=-103 time=140 busy=0 rx=0 ACS: 2: min_nf=-104 interference_factor=2.51189e-21 nf=-103 time=140 busy=0 rx=0 ACS: 3: min_nf=-104 interference_factor=1.58489e-21 nf=-104 time=140 busy=0 rx=0 ACS: 4: min_nf=-104 interference_factor=2.51189e-21 nf=-103 time=140 busy=0 rx=0 ACS: 5: min_nf=-104 interference_factor=1.58489e-21 nf=-104 time=140 busy=0 rx=0 ACS: interference factor average: 2.14109e-21 ACS: Survey analysis for channel 132 (5660 MHz) ACS: 1: min_nf=-103 interference_factor=2.51189e-21 nf=-103 time=140 busy=0 rx=0 ACS: 2: min_nf=-103 interference_factor=2.51189e-21 nf=-103 time=140 busy=0 rx=0 ACS: 3: min_nf=-103 interference_factor=2.51189e-21 nf=-103 time=140 busy=0 rx=0 ACS: 4: min_nf=-103 interference_factor=2.51189e-21 nf=-103 time=140 busy=0 rx=0 ACS: 5: min_nf=-103 interference_factor=2.51189e-21 nf=-103 time=140 busy=0 rx=0 ACS: interference factor average: 2.51189e-21 ACS: Survey analysis for channel 136 (5680 MHz) ACS: 1: min_nf=-103 interference_factor=2.51189e-21 nf=-103 time=140 busy=0 rx=0 ACS: 2: min_nf=-103 interference_factor=3.98107e-21 nf=-102 time=140 busy=0 rx=0 ACS: 3: min_nf=-103 interference_factor=2.51189e-21 nf=-103 time=140 busy=0 rx=0 ACS: 4: min_nf=-103 interference_factor=2.51189e-21 nf=-103 time=140 busy=0 rx=0 ACS: 5: min_nf=-103 interference_factor=2.51189e-21 nf=-103 time=140 busy=0 rx=0 ACS: interference factor average: 2.80572e-21 ACS: Survey analysis for channel 140 (5700 MHz) ACS: 1: min_nf=-104 interference_factor=2.51189e-21 nf=-103 time=140 busy=0 rx=0 ACS: 2: min_nf=-104 interference_factor=2.51189e-21 nf=-103 time=140 busy=0 rx=0 ACS: 3: min_nf=-104 interference_factor=2.51189e-21 nf=-103 time=140 busy=0 rx=0 ACS: 4: min_nf=-104 interference_factor=1.58489e-21 nf=-104 time=140 busy=0 rx=0 ACS: 5: min_nf=-104 interference_factor=2.51189e-21 nf=-103 time=140 busy=0 rx=0 ACS: interference factor average: 2.32649e-21 ACS: Survey analysis for channel 144 (5720 MHz) ACS: 1: min_nf=-103 interference_factor=3.98107e-21 nf=-102 time=141 busy=0 rx=0 ACS: 2: min_nf=-103 interference_factor=2.51189e-21 nf=-103 time=141 busy=0 rx=0 ACS: 3: min_nf=-103 interference_factor=2.51189e-21 nf=-103 time=141 busy=0 rx=0 ACS: 4: min_nf=-103 interference_factor=2.51189e-21 nf=-103 time=140 busy=0 rx=0 ACS: 5: min_nf=-103 interference_factor=2.51189e-21 nf=-103 time=140 busy=0 rx=0 ACS: interference factor average: 2.80572e-21 ACS: Survey analysis for channel 149 (5745 MHz) ACS: 1: min_nf=-103 interference_factor=2.51189e-21 nf=-103 time=140 busy=0 rx=0 ACS: 2: min_nf=-103 interference_factor=2.51189e-21 nf=-103 time=140 busy=0 rx=0 ACS: 3: min_nf=-103 interference_factor=2.51189e-21 nf=-103 time=140 busy=0 rx=0 ACS: 4: min_nf=-103 interference_factor=2.51189e-21 nf=-103 time=140 busy=0 rx=0 ACS: 5: min_nf=-103 interference_factor=2.51189e-21 nf=-103 time=140 busy=0 rx=0 ACS: interference factor average: 2.51189e-21 ACS: Survey analysis for channel 153 (5765 MHz) ACS: 1: min_nf=-100 interference_factor=2.14286 nf=0 time=21 busy=12 rx=0 ACS: 2: min_nf=-100 interference_factor=2.14286 nf=0 time=21 busy=12 rx=0 ACS: 3: min_nf=-100 interference_factor=2.14286 nf=0 time=21 busy=12 rx=0 ACS: 4: min_nf=-100 interference_factor=0.586207 nf=-100 time=58 busy=34 rx=0 ACS: 5: min_nf=-100 interference_factor=2.14286 nf=0 time=21 busy=12 rx=0 ACS: interference factor average: 1.83153 ACS: Survey analysis for channel 157 (5785 MHz) ACS: 1: min_nf=-103 interference_factor=2.51189e-21 nf=-103 time=139 busy=0 rx=0 ACS: 2: min_nf=-103 interference_factor=2.51189e-21 nf=-103 time=139 busy=0 rx=0 ACS: 3: min_nf=-103 interference_factor=2.51189e-21 nf=-103 time=139 busy=0 rx=0 ACS: 4: min_nf=-103 interference_factor=2.51189e-21 nf=-103 time=140 busy=0 rx=0 ACS: 5: min_nf=-103 interference_factor=0.164286 nf=-103 time=140 busy=23 rx=0 ACS: interference factor average: 0.0328571 ACS: Survey analysis for channel 161 (5805 MHz) ACS: 1: min_nf=-103 interference_factor=2.51189e-21 nf=-103 time=140 busy=0 rx=0 ACS: 2: min_nf=-103 interference_factor=2.51189e-21 nf=-103 time=140 busy=0 rx=0 ACS: 3: min_nf=-103 interference_factor=2.51189e-21 nf=-103 time=140 busy=0 rx=0 ACS: 4: min_nf=-103 interference_factor=2.51189e-21 nf=-103 time=140 busy=0 rx=0 ACS: 5: min_nf=-103 interference_factor=2.51189e-21 nf=-103 time=140 busy=0 rx=0 ACS: interference factor average: 2.51189e-21 ACS: Survey analysis for channel 165 (5825 MHz) ACS: 1: min_nf=-104 interference_factor=3.98107e-21 nf=-102 time=139 busy=0 rx=0 ACS: 2: min_nf=-104 interference_factor=1.58489e-21 nf=-104 time=139 busy=0 rx=0 ACS: 3: min_nf=-104 interference_factor=2.51189e-21 nf=-103 time=140 busy=0 rx=0 ACS: 4: min_nf=-104 interference_factor=2.51189e-21 nf=-103 time=139 busy=0 rx=0 ACS: 5: min_nf=-104 interference_factor=2.51189e-21 nf=-103 time=140 busy=0 rx=0 ACS: interference factor average: 2.62032e-21 ACS: Survey analysis for selected bandwidth 80 MHz ACS: channel 36: total interference = 7.4167e-22 ACS: Channel 40: not allowed as primary channel for HT40 ACS: Channel 44: not allowed as primary channel for VHT80 ACS: Channel 48: not allowed as primary channel for HT40 ACS: channel 52: total interference = 7.97027e-22 ACS: Channel 56: not allowed as primary channel for HT40 ACS: Channel 60: not allowed as primary channel for VHT80 ACS: Channel 64: not allowed as primary channel for HT40 ACS: channel 100: total interference = 0.00828491 ACS: Channel 104: not allowed as primary channel for HT40 ACS: Channel 108: not allowed as primary channel for VHT80 ACS: Channel 112: not allowed as primary channel for HT40 ACS: Channel 116: not enough bandwidth ACS: channel 132: total interference = 2.61246e-21 ACS: Channel 136: not allowed as primary channel for HT40 ACS: Channel 140: not allowed as primary channel for HT40 ACS: Channel 144: not allowed as primary channel for HT40 ACS: * channel 149: total interference = 0.466096 ACS: Channel 153: not allowed as primary channel for HT40 ACS: Channel 157: not allowed as primary channel for VHT80 ACS: Channel 161: not allowed as primary channel for HT40 ACS: Channel 165: not allowed as primary channel for HT40 ACS: Ideal channel is 36 (5180 MHz) with total interference factor of 7.4167e-22 ACS: Adjusting VHT center frequency wlp6s0: ACS-COMPLETED freq=5180 channel=36 Disable HT capability [DSSS_CCK-40] on 5 GHz band hw vht capab: 0x339b79fa, conf vht capab: 0x338818f2 wlp6s0: interface state ACS->HT_SCAN Scan for neighboring BSSes prior to enabling 40 MHz channel 40 MHz affected channel range: [5170,5210] MHz wlp6s0: nl80211: scan request nl80211: Passive scan requested nl80211: Scan frequency 5180 MHz nl80211: Scan frequency 5200 MHz Scan requested (ret=0) - scan timeout 30 seconds Interface initialization will be completed in a callback nl80211: Event message available nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlp6s0 wlp6s0: nl80211: Scan trigger wlp6s0: Event SCAN_STARTED (47) received Unknown event 47 RTM_NEWLINK: ifi_index=7 ifname=wlp6s0 wext ifi_family=0 ifi_flags=0x1003 ([UP]) nl80211: Event message available nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlp6s0 wlp6s0: nl80211: New scan results available nl80211: Scan included frequencies: 5180 5200 wlp6s0: Event SCAN_RESULTS (3) received nl80211: Received scan results (1 BSSes) HT40: control channel: 36 secondary channel: 40 Completing interface initialization Mode: IEEE 802.11a Channel: 36 Frequency: 5180 MHz DFS 0 channels required radar detection nl80211: Set freq 5180 (ht_enabled=1, vht_enabled=1, he_enabled=0, bandwidth=80 MHz, cf1=5210 MHz, cf2=0 MHz)

freq=5180
he_enabled=0
vht_enabled=1
ht_enabled=1
bandwidth=80
channel_width=3
center_freq1=5210
center_freq2=0 RATE[0] rate=60 flags=0x1 RATE[1] rate=90 flags=0x0 RATE[2] rate=120 flags=0x1 RATE[3] rate=180 flags=0x0 RATE[4] rate=240 flags=0x1 RATE[5] rate=360 flags=0x0 RATE[6] rate=480 flags=0x0 RATE[7] rate=540 flags=0x0 hostapd_setup_bss(hapd=0x5583ef416fe0 (wlp6s0), first=1) wlp6s0: Flushing old station entries nl80211: flush -> DEL_STATION wlp6s0 (all) wlp6s0: Deauthenticate all stations nl80211: send_mlme - da= ff:ff:ff:ff:ff:ff noack=0 freq=0 no_cck=0 offchanok=0 wait_time=0 fc=0xc0 (WLAN_FC_STYPE_DEAUTH) nlmode=3 nl80211: send_mlme -> send_frame nl80211: send_frame - Use bss->freq=5180 nl80211: send_frame -> send_frame_cmd nl80211: CMD_FRAME freq=5180 wait=0 no_cck=0 no_ack=0 offchanok=0 CMD_FRAME - hexdump(len=26): c0 00 00 00 ff ff ff ff ff ff 04 f0 21 49 44 26 04 f0 21 49 44 26 00 00 02 00 nl80211: Frame command failed: ret=-16 (Device or resource busy) (freq=5180 wait=0) wpa_driver_nl80211_set_key: ifindex=7 (wlp6s0) alg=0 addr=(nil) key_idx=0 set_tx=0 seq_len=0 key_len=0 wpa_driver_nl80211_set_key: ifindex=7 (wlp6s0) alg=0 addr=(nil) key_idx=1 set_tx=0 seq_len=0 key_len=0 wpa_driver_nl80211_set_key: ifindex=7 (wlp6s0) alg=0 addr=(nil) key_idx=2 set_tx=0 seq_len=0 key_len=0 wpa_driver_nl80211_set_key: ifindex=7 (wlp6s0) alg=0 addr=(nil) key_idx=3 set_tx=0 seq_len=0 key_len=0 Using interface wlp6s0 with hwaddr 04:f0:21:49:44:26 and ssid "test-ssid" Deriving WPA PSK based on passphrase SSID - hexdump_ascii(len=9): 74 65 73 74 2d 73 73 69 64 test-ssid
PSK (ASCII passphrase) - hexdump_ascii(len=10): [REMOVED] PSK (from passphrase) - hexdump(len=32): [REMOVED] random: Got 20/20 random bytes Get randomness: len=32 entropy=0 GMK - hexdump(len=32): [REMOVED] Get randomness: len=32 entropy=0 Key Counter - hexdump(len=32): [REMOVED] WPA: Delay group state machine start until Beacon frames have been configured nl80211: Set beacon (beacon_set=0) nl80211: Beacon head - hexdump(len=60): 80 00 00 00 ff ff ff ff ff ff 04 f0 21 49 44 26 04 f0 21 49 44 26 00 00 00 00 00 00 00 00 00 00 64 00 31 00 00 09 74 65 73 74 2d 73 73 69 64 01 08 8c 12 98 24 b0 48 60 6c 03 01 24 nl80211: Beacon tail - hexdump(len=161): 07 12 41 55 20 24 04 17 34 04 14 64 05 1b 84 04 1b 95 05 24 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 0c 00 3b 02 80 00 2d 1a ef 01 1b ff ff ff ff 00 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 00 00 00 3d 16 24 05 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 7f 08 04 00 00 02 00 00 00 40 bf 0c f2 18 88 33 aa ff 18 06 aa ff 18 06 c0 05 01 2a 00 fc ff c3 04 02 2e 2e 2e dd 18 00 50 f2 02 01 01 01 00 03 a4 00 00 27 a4 00 00 42 43 5e 00 62 32 2f 00 nl80211: ifindex=7 nl80211: beacon_int=100 nl80211: beacon_rate=0 nl80211: rate_type=0 nl80211: dtim_period=2 nl80211: ssid=test-ssid
beacon_int=100
dtim_period=2 nl80211: hidden SSID not in use nl80211: privacy=1 nl80211: auth_algs=0x1 nl80211: wpa_version=0x2 nl80211: key_mgmt_suites=0x2 nl80211: pairwise_ciphers=0x10 nl80211: group_cipher=0x10 nl80211: SMPS mode - off nl80211: beacon_ies - hexdump(len=10): 7f 08 04 00 00 02 00 00 00 40 nl80211: proberesp_ies - hexdump(len=10): 7f 08 04 00 00 02 00 00 00 40 nl80211: assocresp_ies - hexdump(len=10): 7f 08 04 00 00 02 00 00 00 40 nl80211: multicast to unicast disabled on interface wlp6s0 WPA: Start group state machine to set initial keys WPA: group state machine entering state GTK_INIT (VLAN-ID 0) Get randomness: len=16 entropy=0 GTK - hexdump(len=16): [REMOVED] WPA: group state machine entering state SETKEYSDONE (VLAN-ID 0) wpa_driver_nl80211_set_key: ifindex=7 (wlp6s0) alg=3 addr=0x5583ef351fd8 key_idx=1 set_tx=1 seq_len=0 key_len=16 nl80211: KEY_DATA - hexdump(len=16): [REMOVED] broadcast key nl80211: Set wlp6s0 operstate 0->1 (UP) netlink: Operstate: ifindex=7 linkmode=-1 (no change), operstate=6 (IF_OPER_UP) nl80211: TX queue param set: queue=0 aifs=1 cw_min=3 cw_max=7 burst_time=15 --> res=0 nl80211: TX queue param set: queue=1 aifs=1 cw_min=7 cw_max=15 burst_time=30 --> res=0 nl80211: TX queue param set: queue=2 aifs=3 cw_min=15 cw_max=63 burst_time=0 --> res=0 nl80211: TX queue param set: queue=3 aifs=7 cw_min=15 cw_max=1023 burst_time=0 --> res=0 wlp6s0: interface state HT_SCAN->ENABLED wlp6s0: AP-ENABLED wlp6s0: Setup of interface done. RTM_NEWLINK: ifi_index=7 ifname=wlp6s0 operstate=6 linkmode=0 ifi_family=0 ifi_flags=0x11043 ([UP][RUNNING][LOWER_UP]) VLAN: RTM_NEWLINK: ifi_index=7 ifname=wlp6s0 ifi_family=0 ifi_flags=0x11043 ([UP][RUNNING][LOWER_UP]) VLAN: vlan_newlink(wlp6s0) nl80211: Event message available nl80211: BSS Event 59 (NL80211_CMD_FRAME) received for wlp6s0 nl80211: MLME event 59 (NL80211_CMD_FRAME) on wlp6s0(04:f0:21:49:44:26) A1=ff:ff:ff:ff:ff:ff A2=f0:18:98:46:ab:db nl80211: MLME event frame - hexdump(len=97): 40 00 00 00 ff ff ff ff ff ff f0 18 98 46 ab db ff ff ff ff ff ff 70 23 00 00 01 08 0c 12 18 24 30 48 60 6c 2d 1a ef 01 17 ff ff ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 7f 08 00 00 00 80 00 00 00 40 6b 07 0f ff ff ff ff ff ff bf 0c b2 59 82 0f ea ff 00 00 ea ff 00 00 nl80211: Frame event nl80211: RX frame da=ff:ff:ff:ff:ff:ff sa=f0:18:98:46:ab:db bssid=ff:ff:ff:ff:ff:ff freq=5180 ssi_signal=-42 fc=0x40 seq_ctrl=0x2370 stype=4 (WLAN_FC_STYPE_PROBE_REQ) len=97 nl80211: send_mlme - da= f0:18:98:46:ab:db noack=1 freq=0 no_cck=0 offchanok=0 wait_time=0 fc=0x50 (WLAN_FC_STYPE_PROBE_RESP) nlmode=3 nl80211: send_mlme -> send_frame nl80211: send_frame - Use bss->freq=5180 nl80211: send_frame -> send_frame_cmd nl80211: CMD_FRAME freq=5180 wait=0 no_cck=0 no_ack=1 offchanok=0 CMD_FRAME - hexdump(len=221): 50 00 00 00 f0 18 98 46 ab db 04 f0 21 49 44 26 04 f0 21 49 44 26 00 00 00 00 00 00 00 00 00 00 64 00 31 00 00 09 74 65 73 74 2d 73 73 69 64 01 08 8c 12 98 24 b0 48 60 6c 03 01 24 07 12 41 55 20 24 04 17 34 04 14 64 05 1b 84 04 1b 95 05 24 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 0c 00 3b 02 80 00 2d 1a ef 01 1b ff ff ff ff 00 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 00 00 00 3d 16 24 05 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 7f 08 04 00 00 02 00 00 00 40 bf 0c f2 18 88 33 aa ff 18 06 aa ff 18 06 c0 05 01 2a 00 fc ff c3 04 02 2e 2e 2e dd 18 00 50 f2 02 01 01 01 00 03 a4 00 00 27 a4 00 00 42 43 5e 00 62 32 2f 00 nl80211: Frame TX command accepted (no ACK); cookie 0x0 nl80211: Event message available nl80211: BSS Event 59 (NL80211_CMD_FRAME) received for wlp6s0 nl80211: MLME event 59 (NL80211_CMD_FRAME) on wlp6s0(04:f0:21:49:44:26) A1=ff:ff:ff:ff:ff:ff A2=f0:18:98:46:ab:db nl80211: MLME event frame - hexdump(len=97): 40 00 00 00 ff ff ff ff ff ff f0 18 98 46 ab db ff ff ff ff ff ff 80 23 00 00 01 08 0c 12 18 24 30 48 60 6c 2d 1a ef 01 17 ff ff ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 7f 08 00 00 00 80 00 00 00 40 6b 07 0f ff ff ff ff ff ff bf 0c b2 59 82 0f ea ff 00 00 ea ff 00 00 nl80211: Frame event

I don't have time to dig into this problem, but I did test 160Mhz 9984 using our firmware and driver recently and it worked OK. Others have also used 160Mhz mode on openwrt (see recently opened bugs, it has issues with 1x1 160Mhz stations it seems, haven't had time to fix that either)

can you give me your working hostapd configuration and iw phy info and iw reg get? i have this output for country_ AU Frequencies:

5180 MHz [36] (23.0 dBm)
5200 MHz [40] (23.0 dBm)
5220 MHz [44] (23.0 dBm)
5240 MHz [48] (23.0 dBm)
5260 MHz [52] (20.0 dBm) (no IR, radar detection)
5280 MHz [56] (20.0 dBm) (no IR, radar detection)
5300 MHz [60] (20.0 dBm) (no IR, radar detection)
5320 MHz [64] (20.0 dBm) (no IR, radar detection)
5500 MHz [100] (27.0 dBm) (no IR, radar detection)
5520 MHz [104] (27.0 dBm) (no IR, radar detection)
5540 MHz [108] (27.0 dBm) (no IR, radar detection)
5560 MHz [112] (27.0 dBm) (no IR, radar detection)
5580 MHz [116] (27.0 dBm) (no IR, radar detection)
5600 MHz [120] (disabled)
5620 MHz [124] (disabled)
5640 MHz [128] (disabled)
5660 MHz [132] (27.0 dBm) (no IR, radar detection)
5680 MHz [136] (27.0 dBm) (no IR, radar detection)
5700 MHz [140] (27.0 dBm) (no IR, radar detection)
5720 MHz [144] (27.0 dBm) (radar detection)
5745 MHz [149] (30.0 dBm)
5765 MHz [153] (30.0 dBm)
5785 MHz [157] (30.0 dBm)
5805 MHz [161] (30.0 dBm)
5825 MHz [165] (30.0 dBm)
5845 MHz [169] (disabled)
5865 MHz [173] (disabled) Supported commands:

fixed! To be able to have 160MHZ, we need to enable DFS support in kernel: ap ~ # dmesg ... [ 2.850086] ath10k_pci 0000:04:00.0: debug 1 debugfs 1 tracing 0 dfs 0 testmode 0 ... now i enabled [ 2.850086] ath10k_pci 0000:04:00.0: debug 1 debugfs 1 tracing 0 dfs 1 testmode 0

The output indicates that DFS is disabled (“dfs 0”). To enable DFS you must enable following options:

“Configure standard kernel features (expert users)” under “General Setup” “cfg80211 certification onus” under “Networking support > Wireless” “Atheros DFS support for certified platforms” under “Device Drivers > Network device support > Wireless LAN > Atheros Wireless Cards” Re-compile the kernel and verify if the kernel output indicates DFS support. Then, re-enable DFS and choose a higher channel of your liking.

Thnx to http://pisarenko.net/blog/2015/05/05/updates-to-the-802-dot-11ac-guide/

Please, enable DFS in your linux-5.2-ct kernel configuration!!!

This fix works only with regular driver from linux-ct-5.2/ ath10k drivers, and transfer rate is a disaster. So i'm searching to resolve it with ath10k-c drivers.

greearb / ath10k-ct

start-radar: ops->start-radar-detection failed: -16 #100

Description of the problem (how to configure, how to reproduce, how often it happens).

Installed ubuntu version 19.10, downloaded kernel source (https://github.com/greearb/linux-ct-5.2),

reboot to that kernel

copy four co files to /usr/lib/modules/5.2.14+/kernel/drivers/net/wireless/ath/ath10k/

Software (OS, Firmware version, kernel, driver, etc)

Firmware_version: firmware-5-ct-non-commercial-htt-mgt.bin

board: -rw-r--r-- 1 root root 157648 lis 13 19:14 /lib/firmware/ath10k/QCA9984/hw1.0/board-2.bin

Ath10k driver

Hardware (NIC chipset, platform, etc)

hostapd -v

cat /etc/hostapd/hostapd.conf

ERROR

sudo -i hostapd -dd /etc/hostapd/hostapd.conf

dmesg -T

hostpad:sudo -i hostapd -dd /etc/hostapd/hostapd.conf

dmesg

VHT80 hostpad - conf

For more options, please visit the following:

https://w1.fi/cgit/hostap/plain/hostapd/hostapd.conf

a=5GHz, g=2.4GHz

channel=0 turns on ACS survey

channel=100

Please take the following into consideration:

Country code (ISO/IEC 3166-1). Used to set regulatory domain.

Set as needed to indicate country in which device is operating.

This can limit available channels and transmit power.

Enable IEEE 802.11d. This advertises the country_code and the set of allowed

channels and transmit power levels based on the regulatory limits. The

country_code setting must be configured with the correct country for

IEEE 802.11d functions.

(default: 0 = disabled)

Enable IEEE 802.11h. This enables radar detection and DFS support if

available. DFS support is required on outdoor 5 GHz channels in most countries

of the world. This can be used only with ieee80211d=1.

(default: 0 = disabled)

Put a 3 here if you want both WPA/WPA2

VHT80Mhz - DFS: working

Please, enable DFS in your linux-5.2-ct kernel configuration!!!