greearb
commented
4 years ago That warning was fixed by Petr earlier today and should get into OpenWrt shortly.
Closed evilbulgarian closed 4 years ago
greearb
commented
4 years ago That warning was fixed by Petr earlier today and should get into OpenWrt shortly.
Please provide this info. See this link for more info on how to gather debug info: http://www.candelatech.com/ath10k-bugs.php
Description of the problem (how to configure, how to reproduce, how often it happens). Over time my wifi has some issues or my router reboots, I see the below trace in dmesg.. Software (OS, Firmware version, kernel, driver, etc)
Logs (dmesg, maybe supplicant and/or hostap)
BusyBox v1.30.1 () built-in shell (ash)
| |.-----.-----.-----.| | | |.----.| | | - || | -| || | | || || | |___|| |_||||____||| |__| |__| W I R E L E S S F R E E D O M
OpenWrt 19.07.2, r10947-65030d81f3
root@wifi01:~# cat /var/log/ lastlog wtmp root@wifi01:~# cat /var/ .uci/ dropbear-ef755c3f/ log/ overlay/ state/ TZ etc/ luci-indexcache resolv.conf sysinfo/ board.json hosts/ luci-modulecache/ resolv.conf.auto tmp/ dhcp.leases lib/ opkg-EdoDII/ run/ usr/ dnsmasq.d/ lock/ opkg-lists/ shm/ root@wifi01:~# cat /var/lo lock/ log/ root@wifi01:~# cat /var/log/ lastlog wtmp root@wifi01:~# cat /var/log/lastlog root@wifi01:~# dmesg [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.14.171 (builder@buildhost) (gcc version 7.5.0 (OpenWrt GCC 7.5.0 r10947-65030d81f3)) #0 SMP Thu Feb 27 21:05:12 2020 [ 0.000000] CPU: ARMv7 Processor [512f04d0] revision 0 (ARMv7), cr=10c5787d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] OF: fdt: Machine model: ZyXEL NBG6817 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] On node 0 totalpages: 122880 [ 0.000000] free_area_init_node: node 0, pgdat c0a27880, node_mem_map ddc39000 [ 0.000000] Normal zone: 960 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 122880 pages, LIFO batch:31 [ 0.000000] random: get_random_bytes called from 0xc09008dc with crng_init=0 [ 0.000000] percpu: Embedded 15 pages/cpu s29388 r8192 d23860 u61440 [ 0.000000] pcpu-alloc: s29388 r8192 d23860 u61440 alloc=15*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 121920 [ 0.000000] Kernel command line: rootfstype=squashfs,ext4 rootwait noinitrd root=/dev/mmcblk0p8 [ 0.000000] Bootloader command line (ignored): board=NBG6817 root=/dev/mmcblk0p8 rootwait zld_ver=2.04 console=ttyHSL1,115200n8 mtdparts=m25p80:0xC0000(SBL)ro,0x40000(TZ)ro,0x40000(RPM)ro,0x80000(u-boot)ro,0x10000(env)ro,0x10000(ART)ro,0x10000(dualflag),0x210000(reserved) [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Memory: 479432K/491520K available (4975K kernel code, 160K rwdata, 756K rodata, 1024K init, 235K bss, 12088K reserved, 0K cma-reserved, 0K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xde800000 - 0xff800000 ( 528 MB) [ 0.000000] lowmem : 0xc0000000 - 0xde000000 ( 480 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0208000 - 0xc07dbe98 (5968 kB) [ 0.000000] .init : 0xc0900000 - 0xc0a00000 (1024 kB) [ 0.000000] .data : 0xc0a00000 - 0xc0a28180 ( 161 kB) [ 0.000000] .bss : 0xc0a2a000 - 0xc0a64e18 ( 236 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] clocksource: dg_timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 305801671480 ns [ 0.000008] sched_clock: 32 bits at 6MHz, resolution 160ns, wraps every 343597383600ns [ 0.000022] Switching to timer-based delay loop, resolution 160ns [ 0.000213] Calibrating delay loop (skipped), value calculated using timer frequency.. 12.50 BogoMIPS (lpj=62500) [ 0.000238] pid_max: default: 32768 minimum: 301 [ 0.000364] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000380] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000889] CPU: Testing write buffer coherency: ok [ 0.001656] Setting up static identity map for 0x42300000 - 0x42300060 [ 0.001811] Hierarchical SRCU implementation. [ 0.002547] smp: Bringing up secondary CPUs ... [ 0.004372] smp: Brought up 1 node, 2 CPUs [ 0.004391] SMP: Total of 2 processors activated (25.00 BogoMIPS). [ 0.004402] CPU: All CPU(s) started in SVC mode. [ 0.014103] VFP support v0.3: implementor 51 architecture 64 part 4d variant 2 rev 0 [ 0.014265] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.014291] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.014396] pinctrl core: initialized pinctrl subsystem [ 0.015388] NET: Registered protocol family 16 [ 0.015689] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.017049] cpuidle: using governor ladder [ 0.017118] cpuidle: using governor menu [ 0.039959] msm_bus_fabric_init_driver [ 0.041455] usbcore: registered new interface driver usbfs [ 0.041540] usbcore: registered new interface driver hub [ 0.041627] usbcore: registered new device driver usb [ 0.041691] pps_core: LinuxPPS API ver. 1 registered [ 0.041703] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti giometti@linux.it [ 0.041735] PTP clock support registered [ 0.043448] clocksource: Switched to clocksource dg_timer [ 0.046675] NET: Registered protocol family 2 [ 0.047273] TCP established hash table entries: 4096 (order: 2, 16384 bytes) [ 0.047312] TCP bind hash table entries: 4096 (order: 3, 32768 bytes) [ 0.047370] TCP: Hash tables configured (established 4096 bind 4096) [ 0.047461] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 0.047489] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 0.047666] NET: Registered protocol family 1 [ 0.047713] PCI: CLS 0 bytes, default 64 [ 0.048900] No memory allocated for crashlog [ 0.049176] workingset: timestamp_bits=30 max_order=17 bucket_order=0 [ 0.054297] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.054314] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. [ 0.060911] io scheduler noop registered [ 0.060929] io scheduler deadline registered (default) [ 0.062316] qcom-pcie 1b500000.pci: 1b500000.pci supply vdda not found, using dummy regulator [ 0.062432] qcom-pcie 1b500000.pci: 1b500000.pci supply vdda_phy not found, using dummy regulator [ 0.062532] qcom-pcie 1b500000.pci: 1b500000.pci supply vdda_refclk not found, using dummy regulator [ 0.063283] OF: PCI: host bridge /soc/pci@1b500000 ranges: [ 0.063328] OF: PCI: IO 0x0fe00000..0x0fefffff -> 0x0fe00000 [ 0.063353] OF: PCI: MEM 0x08000000..0x0fdfffff -> 0x08000000 [ 0.171587] qcom-pcie 1b500000.pci: link up [ 0.171761] qcom-pcie 1b500000.pci: PCI host bridge to bus 0000:00 [ 0.171783] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.171805] pci_bus 0000:00: root bus resource [io 0x0000-0xfffff] (bus address [0xfe00000-0xfefffff]) [ 0.171820] pci_bus 0000:00: root bus resource [mem 0x08000000-0x0fdfffff] [ 0.171837] pci_bus 0000:00: scanning bus [ 0.171883] pci 0000:00:00.0: [17cb:0101] type 01 class 0x060400 [ 0.171968] pci 0000:00:00.0: calling 0xc030d3c0 [ 0.172038] pci 0000:00:00.0: supports D1 [ 0.172049] pci 0000:00:00.0: PME# supported from D0 D1 D3hot [ 0.172065] pci 0000:00:00.0: PME# disabled [ 0.172315] pci_bus 0000:00: fixups for bus [ 0.172339] PCI: bus0: Fast back to back transfers disabled [ 0.172358] pci 0000:00:00.0: scanning [bus 01-ff] behind bridge, pass 0 [ 0.172482] pci_bus 0000:01: scanning bus [ 0.172659] pci 0000:01:00.0: [168c:0046] type 00 class 0x028000 [ 0.173009] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit] [ 0.173475] pci 0000:01:00.0: calling 0xc030d3c0 [ 0.174224] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 0.174265] pci 0000:01:00.0: PME# disabled [ 0.174604] pci_bus 0000:01: fixups for bus [ 0.174675] PCI: bus1: Fast back to back transfers disabled [ 0.174692] pci_bus 0000:01: bus scan returning with max=01 [ 0.174710] pci 0000:00:00.0: scanning [bus 01-ff] behind bridge, pass 1 [ 0.174727] pci_bus 0000:00: bus scan returning with max=ff [ 0.174776] pci 0000:00:00.0: BAR 8: assigned [mem 0x08000000-0x081fffff] [ 0.174803] pci 0000:01:00.0: BAR 0: assigned [mem 0x08000000-0x081fffff 64bit] [ 0.174933] pci 0000:00:00.0: PCI bridge to [bus 01-ff] [ 0.174956] pci 0000:00:00.0: bridge window [mem 0x08000000-0x081fffff] [ 0.174988] pci 0000:00:00.0: calling 0xc055fae4 [ 0.175188] pcieport 0000:00:00.0: assign IRQ: got 67 [ 0.175484] pcieport 0000:00:00.0: AER enabled with IRQ 35 [ 0.175601] pci 0000:01:00.0: calling 0xc055fae4 [ 0.176021] qcom-pcie 1b700000.pci: 1b700000.pci supply vdda not found, using dummy regulator [ 0.176139] qcom-pcie 1b700000.pci: 1b700000.pci supply vdda_phy not found, using dummy regulator [ 0.176235] qcom-pcie 1b700000.pci: 1b700000.pci supply vdda_refclk not found, using dummy regulator [ 0.176949] OF: PCI: host bridge /soc/pci@1b700000 ranges: [ 0.176987] OF: PCI: IO 0x31e00000..0x31efffff -> 0x31e00000 [ 0.177010] OF: PCI: MEM 0x2e000000..0x31dfffff -> 0x2e000000 [ 0.286888] qcom-pcie 1b700000.pci: link up [ 0.287033] qcom-pcie 1b700000.pci: PCI host bridge to bus 0001:00 [ 0.287053] pci_bus 0001:00: root bus resource [bus 00-ff] [ 0.287068] pci_bus 0001:00: root bus resource [mem 0x2e000000-0x31dfffff] [ 0.287082] pci_bus 0001:00: scanning bus [ 0.287124] pci 0001:00:00.0: [17cb:0101] type 01 class 0x060400 [ 0.287194] pci 0001:00:00.0: calling 0xc030d3c0 [ 0.287256] pci 0001:00:00.0: supports D1 [ 0.287266] pci 0001:00:00.0: PME# supported from D0 D1 D3hot [ 0.287279] pci 0001:00:00.0: PME# disabled [ 0.287516] pci_bus 0001:00: fixups for bus [ 0.287534] PCI: bus0: Fast back to back transfers disabled [ 0.287552] pci 0001:00:00.0: scanning [bus 01-ff] behind bridge, pass 0 [ 0.287668] pci_bus 0001:01: scanning bus [ 0.287853] pci 0001:01:00.0: [168c:0046] type 00 class 0x028000 [ 0.288224] pci 0001:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit] [ 0.288721] pci 0001:01:00.0: calling 0xc030d3c0 [ 0.289412] pci 0001:01:00.0: PME# supported from D0 D3hot D3cold [ 0.289456] pci 0001:01:00.0: PME# disabled [ 0.289796] pci_bus 0001:01: fixups for bus [ 0.289872] PCI: bus1: Fast back to back transfers disabled [ 0.289887] pci_bus 0001:01: bus scan returning with max=01 [ 0.289903] pci 0001:00:00.0: scanning [bus 01-ff] behind bridge, pass 1 [ 0.289920] pci_bus 0001:00: bus scan returning with max=ff [ 0.289957] pci 0001:00:00.0: BAR 8: assigned [mem 0x2e000000-0x2e1fffff] [ 0.289981] pci 0001:01:00.0: BAR 0: assigned [mem 0x2e000000-0x2e1fffff 64bit] [ 0.290114] pci 0001:00:00.0: PCI bridge to [bus 01-ff] [ 0.290134] pci 0001:00:00.0: bridge window [mem 0x2e000000-0x2e1fffff] [ 0.290162] pci 0001:00:00.0: calling 0xc055fae4 [ 0.290340] pcieport 0001:00:00.0: assign IRQ: got 100 [ 0.290623] pcieport 0001:00:00.0: AER enabled with IRQ 68 [ 0.290727] pci 0001:01:00.0: calling 0xc055fae4 [ 0.292923] L2 @ QSB rate. Forcing new rate. [ 0.293130] L2 @ 384000 KHz [ 0.293301] CPU0 @ 800000 KHz [ 0.293314] CPU1 @ QSB rate. Forcing new rate. [ 0.293440] CPU1 @ 384000 KHz [ 0.297462] gsbi 16300000.gsbi: GSBI port protocol: 6 crci: 0 [ 0.298857] gsbi 1a200000.gsbi: GSBI port protocol: 3 crci: 0 [ 0.300312] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled [ 0.302870] msm_serial 16340000.serial: msm_serial: detected port #0 [ 0.302971] msm_serial 16340000.serial: uartclk = 7372800 [ 0.303054] 16340000.serial: ttyMSM0 at MMIO 0x16340000 (irq = 101, base_baud = 460800) is a MSM [ 0.303092] msm_serial: console setup on port #0 [ 1.050262] console [ttyMSM0] enabled [ 1.055082] msm_serial: driver initialized [ 1.063528] loop: module loaded [ 1.065048] spi_qup 1a280000.spi: IN:block:16, fifo:64, OUT:block:16, fifo:64 [ 1.067047] m25p80 spi0.0: mx25u3235f (4096 Kbytes) [ 1.072845] 13 qcom-smem partitions found on MTD device spi0.0 [ 1.077554] Creating 13 MTD partitions on "spi0.0": [ 1.083369] 0x000000000000-0x000000020000 : "0:SBL1" [ 1.089052] 0x000000020000-0x000000040000 : "0:MIBIB" [ 1.094163] 0x000000040000-0x000000060000 : "0:SBL2" [ 1.099010] 0x000000060000-0x0000000a0000 : "0:SBL3" [ 1.104121] 0x0000000a0000-0x0000000b0000 : "0:DDRCONFIG" [ 1.109031] 0x0000000b0000-0x0000000c0000 : "0:SSD" [ 1.114386] 0x0000000c0000-0x000000100000 : "0:TZ" [ 1.118970] 0x000000100000-0x000000140000 : "0:RPM" [ 1.123897] 0x000000140000-0x0000001c0000 : "0:APPSBL" [ 1.128602] 0x0000001c0000-0x0000001d0000 : "0:APPSBLENV" [ 1.133892] 0x0000001d0000-0x0000001e0000 : "0:ART" [ 1.139301] 0x0000001e0000-0x0000001f0000 : "0:DUAL_FLAG" [ 1.144058] 0x0000001f0000-0x000000400000 : "0:RESERVED" [ 1.150548] libphy: GPIO Bitbanged MDIO: probed [ 1.175681] switch0: Atheros AR8337 rev. 2 switch registered on gpio-0 [ 2.035773] ar8327: qca,phy-rgmii-en is not specified [ 2.036167] libphy: Fixed MDIO Bus: probed [ 2.041341] ipq806x-gmac-dwmac 37200000.ethernet: PTP uses main clock [ 2.044200] stmmac - user ID: 0x10, Synopsys ID: 0x37 [ 2.050313] ipq806x-gmac-dwmac 37200000.ethernet: Ring mode enabled [ 2.055431] ipq806x-gmac-dwmac 37200000.ethernet: DMA HW capability register supported [ 2.061425] ipq806x-gmac-dwmac 37200000.ethernet: Enhanced/Alternate descriptors [ 2.069475] ipq806x-gmac-dwmac 37200000.ethernet: Enabled extended descriptors [ 2.077056] ipq806x-gmac-dwmac 37200000.ethernet: RX Checksum Offload Engine supported [ 2.084066] ipq806x-gmac-dwmac 37200000.ethernet: COE Type 2 [ 2.091888] ipq806x-gmac-dwmac 37200000.ethernet: TX Checksum insertion supported [ 2.097778] ipq806x-gmac-dwmac 37200000.ethernet: Wake-Up On Lan supported [ 2.105163] ipq806x-gmac-dwmac 37200000.ethernet (unnamed net_device) (uninitialized): device MAC address b2:ee:f2:4b:dc:a1 [ 2.111869] ipq806x-gmac-dwmac 37200000.ethernet: Enable RX Mitigation via HW Watchdog Timer [ 2.124596] ipq806x-gmac-dwmac 37400000.ethernet: PTP uses main clock [ 2.131748] stmmac - user ID: 0x10, Synopsys ID: 0x37 [ 2.137998] ipq806x-gmac-dwmac 37400000.ethernet: Ring mode enabled [ 2.142930] ipq806x-gmac-dwmac 37400000.ethernet: DMA HW capability register supported [ 2.149073] ipq806x-gmac-dwmac 37400000.ethernet: Enhanced/Alternate descriptors [ 2.157070] ipq806x-gmac-dwmac 37400000.ethernet: Enabled extended descriptors [ 2.164630] ipq806x-gmac-dwmac 37400000.ethernet: RX Checksum Offload Engine supported [ 2.171581] ipq806x-gmac-dwmac 37400000.ethernet: COE Type 2 [ 2.179563] ipq806x-gmac-dwmac 37400000.ethernet: TX Checksum insertion supported [ 2.185374] ipq806x-gmac-dwmac 37400000.ethernet: Wake-Up On Lan supported [ 2.192680] ipq806x-gmac-dwmac 37400000.ethernet (unnamed net_device) (uninitialized): device MAC address de:6a:30:04:0a:d7 [ 2.199529] ipq806x-gmac-dwmac 37400000.ethernet: Enable RX Mitigation via HW Watchdog Timer [ 2.211236] i2c /dev entries driver [ 2.220070] Calibration not found. [ 2.223500] Speed bin: 0 [ 2.225903] PVS bin: 4 [ 2.229822] cpuidle: enable-method property 'qcom,kpss-acc-v1' found operations [ 2.230753] cpuidle: enable-method property 'qcom,kpss-acc-v1' found operations [ 2.238991] mmci-pl18x 12400000.sdcc: mmc0: PL180 manf 51 rev0 at 0x12400000 irq 34,0 (pio) [ 2.245437] mmci-pl18x 12400000.sdcc: DMA channels RX dma0chan1, TX dma0chan2 [ 2.314488] sdhci: Secure Digital Host Controller Interface driver [ 2.314518] sdhci: Copyright(c) Pierre Ossman [ 2.319558] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.325491] NET: Registered protocol family 10 [ 2.331365] Segment Routing with IPv6 [ 2.334127] NET: Registered protocol family 17 [ 2.337775] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 2.342562] 8021q: 802.1Q VLAN Support v1.8 [ 2.355309] Registering SWP/SWPB emulation handler [ 2.374631] qcom_rpm 108000.rpm: RPM firmware 3.0.16777364 [ 2.389426] s1a: supplied by regulator-dummy [ 2.389513] s1a: Bringing 0uV into 1050000-1050000uV [ 2.393026] s1b: supplied by regulator-dummy [ 2.397869] s1b: Bringing 0uV into 1050000-1050000uV [ 2.402213] s2a: supplied by regulator-dummy [ 2.407055] s2a: Bringing 0uV into 775000-775000uV [ 2.411412] s2b: supplied by regulator-dummy [ 2.415918] s2b: Bringing 0uV into 775000-775000uV [ 2.424555] hctosys: unable to open rtc device (rtc0) [ 2.425789] Waiting for root device /dev/mmcblk0p8... [ 2.449626] mmc0: new high speed MMC card at address 0001 [ 2.450261] mmcblk0: mmc0:0001 S10004 3.56 GiB [ 2.454446] mmcblk0boot0: mmc0:0001 S10004 partition 1 4.00 MiB [ 2.458572] mmcblk0boot1: mmc0:0001 S10004 partition 2 4.00 MiB [ 2.464488] mmcblk0rpmb: mmc0:0001 S10004 partition 3 4.00 MiB, chardev (248:0) [ 2.471925] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 [ 2.485497] VFS: Mounted root (squashfs filesystem) readonly on device 179:8. [ 2.486350] Freeing unused kernel memory: 1024K [ 2.892081] init: Console is alive [ 2.892210] init: - watchdog - [ 2.908982] random: fast init done [ 3.232538] kmodloader: loading kernel modules from /etc/modules-boot.d/ [ 3.250270] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.251856] SCSI subsystem initialized [ 3.257722] libata version 3.00 loaded. [ 3.259993] ehci-platform: EHCI generic platform driver [ 3.262035] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.264930] ohci-platform: OHCI generic platform driver [ 3.401778] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 3.401878] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 3.406672] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x0000000002010010 [ 3.413977] xhci-hcd xhci-hcd.0.auto: irq 106, io mem 0x11000000 [ 3.423834] hub 1-0:1.0: USB hub found [ 3.429366] hub 1-0:1.0: 1 port detected [ 3.433162] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 3.437043] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 3.442279] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed [ 3.449989] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 3.456814] hub 2-0:1.0: USB hub found [ 3.464859] hub 2-0:1.0: 1 port detected [ 3.468526] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 3.472405] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3 [ 3.477901] xhci-hcd xhci-hcd.1.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x0000000002010010 [ 3.485347] xhci-hcd xhci-hcd.1.auto: irq 107, io mem 0x10000000 [ 3.495016] hub 3-0:1.0: USB hub found [ 3.500885] hub 3-0:1.0: 1 port detected [ 3.504668] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 3.508511] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4 [ 3.513880] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed [ 3.521419] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. [ 3.528313] hub 4-0:1.0: USB hub found [ 3.536397] hub 4-0:1.0: 1 port detected [ 3.540988] kmodloader: done loading kernel modules from /etc/modules-boot.d/ [ 3.550682] init: - preinit - [ 3.777774] random: jshn: uninitialized urandom read (4 bytes read) [ 3.858358] random: jshn: uninitialized urandom read (4 bytes read) [ 4.028940] random: jshn: uninitialized urandom read (4 bytes read) [ 5.130689] Generic PHY fixed-0:01: attached PHY driver [Generic PHY] (mii_bus:phy_addr=fixed-0:01, irq=POLL) [ 5.132326] dwmac1000: Master AXI performs any burst length [ 5.139718] ipq806x-gmac-dwmac 37400000.ethernet eth1: IEEE 1588-2008 Advanced Timestamp supported [ 5.145265] ipq806x-gmac-dwmac 37400000.ethernet eth1: registered PTP clock [ 5.154964] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 5.165857] urandom_read: 2 callbacks suppressed [ 5.165860] random: procd: uninitialized urandom read (4 bytes read) [ 6.233967] ipq806x-gmac-dwmac 37400000.ethernet eth1: Link is Up - 1Gbps/Full - flow control off [ 6.234058] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 8.440766] EXT4-fs (loop0): recovery complete [ 8.441837] EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null) [ 8.446699] mount_root: switching to ext4 overlay [ 8.477190] urandom-seed: Seeding with /etc/urandom.seed [ 8.568429] procd: - early - [ 8.568590] procd: - watchdog - [ 9.207767] procd: - watchdog - [ 9.208285] procd: - ubus - [ 9.225357] random: ubusd: uninitialized urandom read (4 bytes read) [ 9.261328] random: ubusd: uninitialized urandom read (4 bytes read) [ 9.261836] random: ubusd: uninitialized urandom read (4 bytes read) [ 9.268464] procd: - init - [ 9.463900] urngd: v1.0.2 started. [ 9.484839] kmodloader: loading kernel modules from /etc/modules.d/ [ 9.486547] random: crng init done [ 9.487287] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 9.490252] random: 1 urandom warning(s) missed due to ratelimiting [ 9.496354] Loading modules backported from Linux version v4.19.98-0-gd183c8e2647a [ 9.505099] Backport generated by backports.git v4.19.98-1-0-g8204eb99 [ 9.513784] ip_tables: (C) 2000-2006 Netfilter Core Team [ 9.521486] nf_conntrack version 0.5.0 (8192 buckets, 32768 max) [ 9.540485] xt_time: kernel timezone is -0000 [ 9.553483] PPP generic driver version 2.4.2 [ 9.554370] NET: Registered protocol family 24 [ 9.562121] ath10k_pci 0000:01:00.0: assign IRQ: got 67 [ 9.562143] ath10k 4.19 driver, optimized for CT firmware, probing pci device: 0x46. [ 9.562544] ath10k_pci 0000:01:00.0: enabling device (0140 -> 0142) [ 9.569115] ath10k_pci 0000:01:00.0: enabling bus mastering [ 9.569564] ath10k_pci 0000:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0 [ 9.747463] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/fwcfg-pci-0000:01:00.0.txt failed with error -2 [ 9.747511] ath10k_pci 0000:01:00.0: Falling back to user helper [ 9.840997] firmware ath10k!fwcfg-pci-0000:01:00.0.txt: firmware_loading_store: map pages failed [ 9.843064] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/QCA9984/hw1.0/ct-firmware-5.bin failed with error -2 [ 9.848922] ath10k_pci 0000:01:00.0: Falling back to user helper [ 9.891953] firmware ath10k!QCA9984!hw1.0!ct-firmware-5.bin: firmware_loading_store: map pages failed [ 9.892175] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/QCA9984/hw1.0/ct-firmware-2.bin failed with error -2 [ 9.900226] ath10k_pci 0000:01:00.0: Falling back to user helper [ 9.927517] firmware ath10k!QCA9984!hw1.0!ct-firmware-2.bin: firmware_loading_store: map pages failed [ 9.927699] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/QCA9984/hw1.0/firmware-6.bin failed with error -2 [ 9.935806] ath10k_pci 0000:01:00.0: Falling back to user helper [ 9.961304] firmware ath10k!QCA9984!hw1.0!firmware-6.bin: firmware_loading_store: map pages failed [ 10.104871] ath10k_pci 0000:01:00.0: qca9984/qca9994 hw1.0 target 0x01000000 chip_id 0x00000000 sub 168c:cafe [ 10.104904] ath10k_pci 0000:01:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 0 [ 10.115534] ath10k_pci 0000:01:00.0: firmware ver 10.4b-ct-9984-fW-012-17ba98334 api 5 features mfp,peer-flow-ctrl,txstatus-noack,wmi-10.x-CT,ratemask-CT,regdump-CT,txrate-CT,flush-all-CT,pingpong-CT,ch-regs-CT,nop-CT,set-special-CT,tx-rc-CT,cust-stats-CT,txrate2-CT,beacon-cb-CT,wmi-block-ack-CT,wmi-bcn-rc-CT crc32 877928bc [ 12.450400] ath10k_pci 0000:01:00.0: board_file api 2 bmi_id 0:1 crc32 85498734 [ 18.310978] ath10k_pci 0000:01:00.0: 10.4 wmi init: vdevs: 16 peers: 48 tid: 96 [ 18.311005] ath10k_pci 0000:01:00.0: msdu-desc: 2500 skid: 32 [ 18.392838] ath10k_pci 0000:01:00.0: wmi print 'P 48/48 V 16 K 144 PH 176 T 186 msdu-desc: 2500 sw-crypt: 0 ct-sta: 0' [ 18.393692] ath10k_pci 0000:01:00.0: wmi print 'free: 81784 iram: 23220 sram: 14440' [ 18.652032] ath10k_pci 0000:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 32 raw 0 hwcrypto 1 [ 18.756916] ath: EEPROM regdomain: 0x0 [ 18.756932] ath: EEPROM indicates default country code should be used [ 18.756941] ath: doing EEPROM country->regdmn map search [ 18.756960] ath: country maps to regdmn code: 0x3a [ 18.756973] ath: Country alpha2 being used: US [ 18.756983] ath: Regpair used: 0x3a [ 18.762468] ath10k_pci 0001:01:00.0: assign IRQ: got 100 [ 18.762506] ath10k 4.19 driver, optimized for CT firmware, probing pci device: 0x46. [ 18.763617] ath10k_pci 0001:01:00.0: enabling device (0140 -> 0142) [ 18.769584] ath10k_pci 0001:01:00.0: enabling bus mastering [ 18.770270] ath10k_pci 0001:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0 [ 18.945323] ath10k_pci 0001:01:00.0: Direct firmware load for ath10k/fwcfg-pci-0001:01:00.0.txt failed with error -2 [ 18.945356] ath10k_pci 0001:01:00.0: Falling back to user helper [ 19.079412] firmware ath10k!fwcfg-pci-0001:01:00.0.txt: firmware_loading_store: map pages failed [ 19.080013] ath10k_pci 0001:01:00.0: Direct firmware load for ath10k/QCA9984/hw1.0/ct-firmware-5.bin failed with error -2 [ 19.087341] ath10k_pci 0001:01:00.0: Falling back to user helper [ 19.113923] firmware ath10k!QCA9984!hw1.0!ct-firmware-5.bin: firmware_loading_store: map pages failed [ 19.114077] ath10k_pci 0001:01:00.0: Direct firmware load for ath10k/QCA9984/hw1.0/ct-firmware-2.bin failed with error -2 [ 19.122122] ath10k_pci 0001:01:00.0: Falling back to user helper [ 19.175618] firmware ath10k!QCA9984!hw1.0!ct-firmware-2.bin: firmware_loading_store: map pages failed [ 19.175804] ath10k_pci 0001:01:00.0: Direct firmware load for ath10k/QCA9984/hw1.0/firmware-6.bin failed with error -2 [ 19.183928] ath10k_pci 0001:01:00.0: Falling back to user helper [ 19.220199] firmware ath10k!QCA9984!hw1.0!firmware-6.bin: firmware_loading_store: map pages failed [ 19.220340] ath10k_pci 0001:01:00.0: qca9984/qca9994 hw1.0 target 0x01000000 chip_id 0x00000000 sub 168c:cafe [ 19.228171] ath10k_pci 0001:01:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 0 [ 19.240386] ath10k_pci 0001:01:00.0: firmware ver 10.4b-ct-9984-fW-012-17ba98334 api 5 features mfp,peer-flow-ctrl,txstatus-noack,wmi-10.x-CT,ratemask-CT,regdump-CT,txrate-CT,flush-all-CT,pingpong-CT,ch-regs-CT,nop-CT,set-special-CT,tx-rc-CT,cust-stats-CT,txrate2-CT,beacon-cb-CT,wmi-block-ack-CT,wmi-bcn-rc-CT crc32 877928bc [ 21.615527] ath10k_pci 0001:01:00.0: board_file api 2 bmi_id 0:2 crc32 85498734 [ 27.561894] ath10k_pci 0001:01:00.0: 10.4 wmi init: vdevs: 16 peers: 48 tid: 96 [ 27.561921] ath10k_pci 0001:01:00.0: msdu-desc: 2500 skid: 32 [ 27.645936] ath10k_pci 0001:01:00.0: wmi print 'P 48/48 V 16 K 144 PH 176 T 186 msdu-desc: 2500 sw-crypt: 0 ct-sta: 0' [ 27.646820] ath10k_pci 0001:01:00.0: wmi print 'free: 81784 iram: 23220 sram: 14440' [ 27.918192] ath10k_pci 0001:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 32 raw 0 hwcrypto 1 [ 28.016969] ath: EEPROM regdomain: 0x0 [ 28.016983] ath: EEPROM indicates default country code should be used [ 28.016994] ath: doing EEPROM country->regdmn map search [ 28.017012] ath: country maps to regdmn code: 0x3a [ 28.017025] ath: Country alpha2 being used: US [ 28.017035] ath: Regpair used: 0x3a [ 28.025993] kmodloader: done loading kernel modules from /etc/modules.d/ [ 30.436435] Generic PHY fixed-0:01: attached PHY driver [Generic PHY] (mii_bus:phy_addr=fixed-0:01, irq=POLL) [ 30.437144] dwmac1000: Master AXI performs any burst length [ 30.445393] ipq806x-gmac-dwmac 37400000.ethernet eth1: IEEE 1588-2008 Advanced Timestamp supported [ 30.450808] ipq806x-gmac-dwmac 37400000.ethernet eth1: registered PTP clock [ 30.459924] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 30.468459] br-DMZ: port 1(eth1.173) entered blocking state [ 30.472497] br-DMZ: port 1(eth1.173) entered disabled state [ 30.478224] device eth1.173 entered promiscuous mode [ 30.483516] device eth1 entered promiscuous mode [ 30.489874] IPv6: ADDRCONF(NETDEV_UP): br-DMZ: link is not ready [ 30.511483] br-GUEST: port 1(eth1.192) entered blocking state [ 30.511507] br-GUEST: port 1(eth1.192) entered disabled state [ 30.516446] device eth1.192 entered promiscuous mode [ 30.523088] IPv6: ADDRCONF(NETDEV_UP): br-GUEST: link is not ready [ 30.550125] br-WIFI: port 1(eth1.172) entered blocking state [ 30.550150] br-WIFI: port 1(eth1.172) entered disabled state [ 30.555098] device eth1.172 entered promiscuous mode [ 30.561496] IPv6: ADDRCONF(NETDEV_UP): br-WIFI: link is not ready [ 30.567524] IPv6: ADDRCONF(NETDEV_UP): eth1.1: link is not ready [ 31.514049] ipq806x-gmac-dwmac 37400000.ethernet eth1: Link is Up - 1Gbps/Full - flow control off [ 37.222747] ath10k_pci 0001:01:00.0: 10.4 wmi init: vdevs: 16 peers: 48 tid: 96 [ 37.222774] ath10k_pci 0001:01:00.0: msdu-desc: 2500 skid: 32 [ 37.306832] ath10k_pci 0001:01:00.0: wmi print 'P 48/48 V 16 K 144 PH 176 T 186 msdu-desc: 2500 sw-crypt: 0 ct-sta: 0' [ 37.307703] ath10k_pci 0001:01:00.0: wmi print 'free: 81784 iram: 23220 sram: 14440' [ 37.744282] ath10k_pci 0001:01:00.0: Firmware lacks feature flag indicating a retry limit of > 2 is OK, requested limit: 4 [ 37.744512] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready [ 37.758800] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 37.761094] IPv6: ADDRCONF(NETDEV_CHANGE): eth1.1: link becomes ready [ 37.766512] br-WIFI: port 1(eth1.172) entered blocking state [ 37.772885] br-WIFI: port 1(eth1.172) entered forwarding state [ 37.778948] br-DMZ: port 1(eth1.173) entered blocking state [ 37.784321] br-DMZ: port 1(eth1.173) entered forwarding state [ 37.790025] br-GUEST: port 1(eth1.192) entered blocking state [ 37.795691] br-GUEST: port 1(eth1.192) entered forwarding state [ 37.802733] IPv6: ADDRCONF(NETDEV_CHANGE): br-WIFI: link becomes ready [ 37.807254] IPv6: ADDRCONF(NETDEV_CHANGE): br-DMZ: link becomes ready [ 37.813841] IPv6: ADDRCONF(NETDEV_CHANGE): br-GUEST: link becomes ready [ 37.820608] br-WIFI: port 2(wlan1) entered blocking state [ 37.826696] br-WIFI: port 2(wlan1) entered disabled state [ 37.832347] device wlan1 entered promiscuous mode [ 38.221088] ath10k_pci 0001:01:00.0: NOTE: Firmware DBGLOG output disabled in debug_mask: 0x10000000 [ 43.751011] ath10k_pci 0000:01:00.0: 10.4 wmi init: vdevs: 16 peers: 48 tid: 96 [ 43.751040] ath10k_pci 0000:01:00.0: msdu-desc: 2500 skid: 32 [ 43.832919] ath10k_pci 0000:01:00.0: wmi print 'P 48/48 V 16 K 144 PH 176 T 186 msdu-desc: 2500 sw-crypt: 0 ct-sta: 0' [ 43.833755] ath10k_pci 0000:01:00.0: wmi print 'free: 81784 iram: 23220 sram: 14440' [ 44.190574] ath10k_pci 0000:01:00.0: Firmware lacks feature flag indicating a retry limit of > 2 is OK, requested limit: 4 [ 44.190839] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 44.204216] br-DMZ: port 2(wlan0) entered blocking state [ 44.206342] br-DMZ: port 2(wlan0) entered disabled state [ 44.212089] device wlan0 entered promiscuous mode [ 44.550520] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready [ 44.550860] br-WIFI: port 2(wlan1) entered blocking state [ 44.556081] br-WIFI: port 2(wlan1) entered forwarding state [ 44.571112] br-DMZ: port 3(wlan1-1) entered blocking state [ 44.571164] br-DMZ: port 3(wlan1-1) entered disabled state [ 44.576521] device wlan1-1 entered promiscuous mode [ 44.587410] IPv6: ADDRCONF(NETDEV_UP): wlan1-1: link is not ready [ 44.587449] br-DMZ: port 3(wlan1-1) entered blocking state [ 44.592484] br-DMZ: port 3(wlan1-1) entered forwarding state [ 44.665609] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1-1: link becomes ready [ 44.667221] br-GUEST: port 2(wlan1-2) entered blocking state [ 44.671034] br-GUEST: port 2(wlan1-2) entered disabled state [ 44.677212] device wlan1-2 entered promiscuous mode [ 44.691185] IPv6: ADDRCONF(NETDEV_UP): wlan1-2: link is not ready [ 44.691222] br-GUEST: port 2(wlan1-2) entered blocking state [ 44.696321] br-GUEST: port 2(wlan1-2) entered forwarding state [ 44.721278] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1-2: link becomes ready [ 45.115739] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 45.116072] br-DMZ: port 2(wlan0) entered blocking state [ 45.121189] br-DMZ: port 2(wlan0) entered forwarding state [ 45.137269] br-WIFI: port 3(wlan0-1) entered blocking state [ 45.137304] br-WIFI: port 3(wlan0-1) entered disabled state [ 45.141848] device wlan0-1 entered promiscuous mode [ 45.160481] IPv6: ADDRCONF(NETDEV_UP): wlan0-1: link is not ready [ 45.160519] br-WIFI: port 3(wlan0-1) entered blocking state [ 45.165611] br-WIFI: port 3(wlan0-1) entered forwarding state [ 45.203925] br-WIFI: port 3(wlan0-1) entered disabled state [ 45.264642] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0-1: link becomes ready [ 45.264796] br-WIFI: port 3(wlan0-1) entered blocking state [ 45.270071] br-WIFI: port 3(wlan0-1) entered forwarding state [ 45.278254] br-GUEST: port 3(wlan0-2) entered blocking state [ 45.281434] br-GUEST: port 3(wlan0-2) entered disabled state [ 45.287426] device wlan0-2 entered promiscuous mode [ 45.305540] IPv6: ADDRCONF(NETDEV_UP): wlan0-2: link is not ready [ 45.305577] br-GUEST: port 3(wlan0-2) entered blocking state [ 45.310609] br-GUEST: port 3(wlan0-2) entered forwarding state [ 45.340919] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0-2: link becomes ready [ 45.343406] br-DMZ: port 4(wlan0-3) entered blocking state [ 45.346447] br-DMZ: port 4(wlan0-3) entered disabled state [ 45.352054] device wlan0-3 entered promiscuous mode [ 45.367131] IPv6: ADDRCONF(NETDEV_UP): wlan0-3: link is not ready [ 45.367167] br-DMZ: port 4(wlan0-3) entered blocking state [ 45.372209] br-DMZ: port 4(wlan0-3) entered forwarding state [ 45.472672] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0-3: link becomes ready [ 53.787746] ath10k_pci 0000:01:00.0: Invalid peer id 1 or peer stats buffer, peer: db384000 sta: (null) [48089.651096] ath10k_pci 0000:01:00.0: Invalid VHT mcs 15 peer stats [571811.526509] ------------[ cut here ]------------ [571811.526570] WARNING: CPU: 1 PID: 2385 at backports-4.19.98-1/net/wireless/util.c:1147 0xbf25fd88 [cfg80211@bf25b000+0x37000] [571811.531097] invalid rate bw=4, mcs=15, nss=4 [571811.541600] Modules linked in: pppoe ppp_async ath10k_pci ath10k_core ath pppox ppp_generic nf_conntrack_ipv6 mac80211 iptable_nat ipt_REJECT ipt_MASQUERADE cfg80211 xt_time xt_tcpudp xt_state xt_nat xt_multiport xt_mark xt_mac xt_limit xt_conntrack xt_comment xt_TCPMSS xt_REDIRECT xt_LOG xt_FLOWOFFLOAD xt_CT slhc nf_reject_ipv4 nf_nat_redirect nf_nat_masquerade_ipv4 nf_conntrack_ipv4 nf_nat_ipv4 nf_nat nf_log_ipv4 nf_flow_table_hw nf_flow_table nf_defrag_ipv6 nf_defrag_ipv4 nf_conntrack_rtcache nf_conntrack iptable_mangle iptable_filter ip_tables crc_ccitt compat ledtrig_usbport nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables ip6t_REJECT x_tables nf_reject_ipv6 leds_gpio xhci_plat_hcd xhci_pci xhci_hcd dwc3 dwc3_of_simple ohci_platform ohci_hcd phy_qcom_dwc3 ahci ehci_platform [571811.594357] sd_mod ahci_platform libahci_platform libahci libata scsi_mod ehci_hcd gpio_button_hotplug ext4 mbcache jbd2 crc32c_generic [571811.616602] CPU: 1 PID: 2385 Comm: hostapd Not tainted 4.14.171 #0 [571811.628899] Hardware name: Generic DT based system [571811.634984] Function entered at [] from []
[571811.639838] Function entered at [] from []
[571811.645742] Function entered at [] from []
[571811.651644] Function entered at [] from []
[571811.657544] Function entered at [] from []
[571811.663489] Function entered at [] from []
[571811.669355] Function entered at [] from []
[571811.675257] Function entered at [] from []
[571811.681159] Function entered at [] from []
[571811.687079] Function entered at [] from []
[571811.692964] Function entered at [] from []
[571811.698865] Function entered at [] from []
[571811.704772] Function entered at [] from []
[571811.710672] Function entered at [] from []
[571811.716573] Function entered at [] from []
[571811.722474] Function entered at [] from []
[571811.728377] Function entered at [] from []
[571811.734280] Function entered at [] from []
[571811.740186] Function entered at [] from []
[571811.746086] Function entered at [] from []
[571811.752079] ---[ end trace 930655c73d61c5bc ]---