search

greearb / ath10k-ct

Stand-alone ath10k driver based on Candela Technologies Linux kernel.
111 stars 41 forks source link

ATH10K Wave2 AP mode no beacon #207

Open NathanKuo0821 opened 2 years ago

NathanKuo0821 commented 2 years ago

Description of the problem (how to configure, how to reproduce, how often it happens). We use QCA9984 2.4G as AP mode on PowerPC with CT driver and CT firmware. When the AP starts up, we will find that the AP does not send any beacon, and we will see from the firmware status that the PDEV reset counter keeps increasing. Any idea why this problem occurs?

Software (OS, Firmware version, kernel, driver, etc) Firmware version:10.4b-ct-9984-fH-13-774502ee5 Driver : backports.git v5.7.5-1-0-g34b56f34 Kerenl : 4.1.35-rt41-

Hardware (NIC chipset, platform, etc) PowerPC

Logs (dmesg, maybe supplicant and/or hostap) hostapd_log.txt firmware_status_log.txt hostapd_conf.txt ath10k_init_log.txt nework_config.txt

greearb commented 2 years ago

Does your system work if you use upstream driver and firmware?

NathanKuo0821 commented 2 years ago

Hi Greearb,

We used the upstream driver and ath10k firmware 'https://github.com/kvalo/ath10k-firmware/tree/master/QCA9984/hw1.0' and then the issue still exists , Do you think this is hardware RF or software issue? Can you give me some advice? Very thanks.

Nathan Kuo

greearb commented 2 years ago

Try using known-working x86-64 hardware so that you can at least debug your basic configuration, then once that is working, you can try your specific board.

Thanks, Ben

On 9/12/22 11:21 PM, NathanKuo0821 wrote:

Hi Greearb,

We used the upstream driver and ath10k firmware 'https://github.com/kvalo/ath10k-firmware/tree/master/QCA9984/hw1.0 https://urldefense.proofpoint.com/v2/url?u=https-3A__github.com_kvalo_ath10k-2Dfirmware_tree_master_QCA9984_hw1.0&d=DwMCaQ&c=euGZstcaTDllvimEN8b7jXrwqOf-v5A_CdpgnVfiiMM&r=HYKqseB9xg-u2kz3egvegqfgyXnEBhQotXfR3iCfdgM&m=JRmkBPnwhfs4D3Ez1m5_3W9QgbX1wJ51azOhFWN3loM&s=uqkH2BaiGh3OdQMGacuQR4w7eKMFxfqILIv3nYE9qTE&e=' and then the issue still exists , Do you think this is hardware RF or software issue? Can you give me some advice? Very thanks.

Nathan Kuo

— Reply to this email directly, view it on GitHub https://urldefense.proofpoint.com/v2/url?u=https-3A__github.com_greearb_ath10k-2Dct_issues_207-23issuecomment-2D1244952281&d=DwMCaQ&c=euGZstcaTDllvimEN8b7jXrwqOf-v5A_CdpgnVfiiMM&r=HYKqseB9xg-u2kz3egvegqfgyXnEBhQotXfR3iCfdgM&m=JRmkBPnwhfs4D3Ez1m5_3W9QgbX1wJ51azOhFWN3loM&s=N1f-iImXupcNk2sUU9GroolFTBQyJfYuwtnOcEpxPk0&e=, or unsubscribe https://urldefense.proofpoint.com/v2/url?u=https-3A__github.com_notifications_unsubscribe-2Dauth_AACHNKVK3MRKFXYOHDEVFU3V6AMNZANCNFSM6AAAAAAQFPDMRU&d=DwMCaQ&c=euGZstcaTDllvimEN8b7jXrwqOf-v5A_CdpgnVfiiMM&r=HYKqseB9xg-u2kz3egvegqfgyXnEBhQotXfR3iCfdgM&m=JRmkBPnwhfs4D3Ez1m5_3W9QgbX1wJ51azOhFWN3loM&s=px7iZ3Wk8noKYRguyTNPa0A-IMOZ0oCF_ytlNIQ2_XA&e=. You are receiving this because you commented.Message ID: @.***>

-- Ben Greear @.***> Candela Technologies Inc http://www.candelatech.com