Can't open step file - Githubissues

gregdavill / d20-hardware

Hardware design files for the icosahedran d20 build.

BSD 2-Clause "Simplified" License

84 stars 9 forks source link

Can't open step file #1

Closed FesixGermany closed 3 years ago

FesixGermany commented 3 years ago

It seems that (at least for me) there is a problem with the step file of the enclosure, even after half an hour FreeCAD and Fusion 360 are both still opening/uploading the file.

gregdavill commented 3 years ago

Okay, let me check. I exported it from Fusion360, but didn't check opening it before uploading.

gregdavill commented 3 years ago

Opened up fine here. But it did take Fusion 360 around 2 hours on my laptop... Capture

STEP is probably not a great format to store the entire assembly.. I'll remove the individual LED panels from the STEP file, But also upload a f3d with the entire assembly

FesixGermany commented 3 years ago

I only waited about 30 minutes and because I opened bigger files in the past (17MB isn't that big) I thought something was wrong with the file. Maybe a good idea to have seperate files, thanks for checking!

gregdavill commented 3 years ago

In https://github.com/gregdavill/d20-hardware/commit/25068dbbbbd1506a0a4d3820a07ad3c2272220ee I've added some more options so hopefully there is an option that loads up a bit quicker :)