[bug] Integration Lost Connection with printer

[Rplanasr]

Describe the bug

The connection with the printer is lost after a few hours, for it to work again the "reload" bambu lab operation must be performed in integration entries in Home Assistant (devices and services)

To Reproduce

1 just waiting a few hours while printing

Expected Behaviour

Solve the issue

What device are you using?

X1C

Diagnostic Output

{
  "home_assistant": {
    "installation_type": "Home Assistant OS",
    "version": "2023.12.3",
    "dev": false,
    "hassio": true,
    "virtualenv": false,
    "python_version": "3.11.6",
    "docker": true,
    "arch": "aarch64",
    "timezone": "America/Lima",
    "os_name": "Linux",
    "os_version": "6.1.58-haos-raspi",
    "supervisor": "2023.12.0",
    "host_os": "Home Assistant OS 11.2",
    "docker_version": "24.0.7",
    "chassis": "embedded",
    "run_as_root": true
  },
  "custom_components": {
    "dwains_dashboard": {
      "version": "3.6.0",
      "requirements": []
    },
    "grocy": {
      "version": "v4.11.1",
      "requirements": [
        "pygrocy==2.0.0"
      ]
    },
    "hacs": {
      "version": "1.33.0",
      "requirements": [
        "aiogithubapi>=22.10.1"
      ]
    },
    "bhyve": {
      "version": "3.2.2",
      "requirements": []
    },
    "bambu_lab": {
      "version": "1.9.2",
      "requirements": []
    },
    "spotcast": {
      "version": "v3.6.30",
      "requirements": []
    },
    "alexa_media": {
      "version": "4.6.5",
      "requirements": [
        "alexapy==1.27.6",
        "packaging>=20.3",
        "wrapt>=1.14.0"
      ]
    }
  },
  "integration_manifest": {
    "domain": "bambu_lab",
    "name": "Bambu Lab",
    "codeowners": [
      "@greghesp",
      "@AdrianGarside"
    ],
    "config_flow": true,
    "dependencies": [
      "device_automation",
      "mqtt",
      "ffmpeg"
    ],
    "documentation": "https://github.com/greghesp/ha-bambulab",
    "iot_class": "local_push",
    "issue_tracker": "https://github.com/greghesp/ha-bambulab/issues",
    "ssdp": [
      {
        "st": "urn:bambulab-com:device:3dprinter:1"
      }
    ],
    "version": "1.9.2",
    "is_built_in": false
  },
  "data": {
    "push_all": null,
    "get_version": {
      "command": "get_version",
      "module": [
        {
          "hw_ver": "",
          "name": "ota",
          "sn": "",
          "sw_ver": "01.07.01.00"
        },
        {
          "hw_ver": "AP05",
          "name": "rv1126",
          "sn": "**REDACTED**",
          "sw_ver": "00.00.28.44"
        },
        {
          "hw_ver": "TH09",
          "name": "th",
          "sn": "**REDACTED**",
          "sw_ver": "00.00.07.12"
        },
        {
          "hw_ver": "MC07",
          "name": "mc",
          "sn": "**REDACTED**",
          "sw_ver": "00.00.22.33/00.00.22.33"
        },
        {
          "hw_ver": "",
          "name": "xm",
          "sn": "",
          "sw_ver": "00.01.02.02"
        },
        {
          "hw_ver": "AMS08",
          "name": "ams/0",
          "sn": "**REDACTED**",
          "sw_ver": "00.00.06.40"
        },
        {
          "hw_ver": "AMS08",
          "name": "ams/1",
          "sn": "**REDACTED**",
          "sw_ver": "00.00.06.40"
        },
        {
          "hw_ver": "AHB01",
          "name": "ahb",
          "sn": "**REDACTED**",
          "sw_ver": "00.00.00.42"
        }
      ],
      "sequence_id": "0"
    }
  }
}

Log Extracts

No response

Other Information

No response

[AdrianGarside]

Upgrade to 2.0.1. This issue with the X1 was just fixed in that release.

[Rplanasr]

Thank you very much!, great job I appreciate so much your work.

Regards

Obtener Outlook para Androidhttps://aka.ms/ghei36

---

From: AdrianGarside @.> Sent: Saturday, December 23, 2023 12:45:31 PM To: greghesp/ha-bambulab @.> Cc: Rplanasr @.>; Author @.> Subject: Re: [greghesp/ha-bambulab] [bug] Integration Lost Connection with printer (Issue #333)

Upgrade to 2.0.1. This issue with the X1 was just fixed in that release.

— Reply to this email directly, view it on GitHubhttps://github.com/greghesp/ha-bambulab/issues/333#issuecomment-1868339497, or unsubscribehttps://github.com/notifications/unsubscribe-auth/BE4GNLNTXC5FIGH77PNBCBLYK4KDXAVCNFSM6AAAAABBA4TKWGVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTQNRYGMZTSNBZG4. You are receiving this because you authored the thread.Message ID: @.***>