[Feature] Set bed temperature

[Riincewiind]

Describe the feature

Currently I can only read out the temperature from the X1C, but not set it. I would like to set also the temperature of the bed.

usecase: I am printing a lot with ABS. When the bed cools down after a print, the printed object pops off the bed. The strain in the object sometimes leaves white marks/shadows (visible e.g. on black ABS), which can be easily removed by simply heating up the object again for some minutes on the bed. So i would like to realize an automation that gets triggered after print is finished, then waits until bed temperature is below 40°C for some minutes, then heats up to 100°C for 10min, then cools down finally.

What device is this for?

X1C

Other Information

No response

[sabaatworld]

I would like to +1 this feature request. Somehow the Panda touch display is able to do it, so I suppose it should be possible with local API. It would be pretty useful with various automations.

[AdrianGarside]

It will be possible to add this. But Bambu is almost certainly going to block this at some point given their statements after Panda Touch got announced.

[tool666schism]

Would love to see the ability to set nozzle temperature added as well

[TomN7]

I'd like to +1 this as well - I hoped to create an automation that could set the bed temperature of my P1S and then send me a notification when the chamber had reached a warm enough ambient temperature for printing ABS (using a zigbee temperature sensor).

[MarcelLieb]

I would love this feature too. The P1S currently doesn't have a dedicated feature for filament drying, but by being able to set the bed temperature via Home Assistant, I could implement a similar feature myself.

[Nocturneit]

+1 on this feature

[roomonthethird]

+1