Closed ctilley83 closed 4 years ago
I double checked my files and this is not an issue, it should clamp correctly.
Could you check that the bottom of the X carriage isn't broken and that you are using M3x10mm screws (sometimes people are confusing with M3x12mm screws)?
Something to check. For the lower single bearing, the X Carriage back is not clamping against the bearing. This results in significant slop. I'm using the Bondtech mosquito X carriage in optional parts, with the x carriage back in the mk3s printed parts in the dev branch. Maybe I'm mismatching by mistake?