search

gregsaun / bear_extruder_and_x_axis

An improved extruder and X axis for Prusa i3 printers
GNU General Public License v3.0
341 stars 87 forks source link

request x_end_idler scad #44

Closed CsepregiArtur closed 4 years ago

CsepregiArtur commented 4 years ago

Hello

can you please share the x_end_idler scad?

I made an upgrade from an anet A8 but my steel rods are longer, I didn't take that in count that, now I want to test out the printer, but the rods are too long :(. I would need the scad to modify in that part to be able to fit the longer rods. this would be only a temporary solution, after that, I want to cut the rods, but still, now I'm not sure its oke all the setup.

gregsaun commented 4 years ago

I have no SCAD files, everything is designed under Fusion 360. You can find the Fusion 360 source file here with the whole assembly : https://github.com/gregsaun/bear_extruder_and_x_axis/blob/master/src/bear_extruder_x_axis.f3z

gregsaun commented 4 years ago

Oops closed too quickly :)

CsepregiArtur commented 4 years ago

Thank you!!!!!

On Thu, 23 Jan 2020 at 12:30, Grégoire Saunier notifications@github.com wrote:

Closed #44 https://github.com/gregsaun/bear_extruder_and_x_axis/issues/44.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/gregsaun/bear_extruder_and_x_axis/issues/44?email_source=notifications&email_token=AK3PEB44SJUYNPPKGFJK23TQ7FWUDA5CNFSM4KIX6OSKYY3PNVWWK3TUL52HS4DFWZEXG43VMVCXMZLOORHG65DJMZUWGYLUNFXW5KTDN5WW2ZLOORPWSZGOWE3ZXLA#event-2973211564, or unsubscribe https://github.com/notifications/unsubscribe-auth/AK3PEBZFAMUZF33ROJ65B5TQ7FWUDANCNFSM4KIX6OSA .