search

gregsaun / bear_extruder_and_x_axis

An improved extruder and X axis for Prusa i3 printers
GNU General Public License v3.0
339 stars 87 forks source link

Hemera fan knocks on the x-motor-end #47

Closed knickohr closed 4 years ago

knickohr commented 4 years ago

I build up my new Bear 2.1 with the BEARmera. There is maybe a little problem with the dimensions of some parts. The Hemera fan knocks on the x-motor-end while going left to the startup position. So, until there is no endstop switch (MK3s) the fan drives into the left side. On the second picture you see, there is some space left between the x-motor-end and the x- carriage.

Thomas

IMG_0184 IMG_0185 IMG_0186

gregsaun commented 4 years ago

It is because you are using the old X ends, you need to use the new ones from the dev branch.

knickohr commented 4 years ago

Really ? I'm sure I've use the ones from the dev.

knickohr commented 4 years ago

Ahhh, OK. I see. So I also used the wrong x end idler and the x carriage ?

Any other wrong parts ?

gregsaun commented 4 years ago

Not that I see. Sorry, should be easier soon as everything will be available from the github.

knickohr commented 4 years ago

x carriage back is different too, x carriage and x end idler are OK. Seems I mixed parts. Or I used an earlier dev version ?

gregsaun commented 4 years ago

No it was available at the same time as the BearMera files. You have to get the X ends, X carriage back and cable guide back from the dev branch.

knickohr commented 4 years ago

OK, all the parts with date "2 months ago".

gregsaun commented 4 years ago

This is correct, if you check the X end motor for example you will see that the shape of the arm is different than yours.

knickohr commented 4 years ago

Fixed ! :-) IMG_2142