search

gregsaun / prusa_i3_bear_upgrade

Stronger frame for Prusa i3 MK2(s), MK2.5 and MK3
GNU General Public License v3.0
960 stars 343 forks source link

optional LCD cover does not fit the lcd supports (version 2.1) #120

Closed domhardt closed 3 years ago

domhardt commented 3 years ago

The optional LCD cover with text has not enough space in the back to fit the lcd_support_a and lcd_support_b. I refer to the version 2.1

gregsaun commented 3 years ago

Hello, are you using the official Prusa LCD screen or an LDO Motor one?

domhardt commented 3 years ago

Hello, as I got my printer from someone else I had to re-check everything. All dimensions of my parts are identical to the components from the Fusion360 project of this repo. So in the next step I assembled the components in Fusion360 and there is not enough space in the LCD cover for the LCD support brackets. Please see the attached images and the Fusio360 project.

UPDATE I did the same with the original Prusa MK3S LCD cover and this part seems to fit. I will print this instead.

Bildschirmfoto 2021-01-23 um 00 46 18 Bildschirmfoto 2021-01-23 um 00 48 18

gregsaun commented 3 years ago

Oh I see, you are not using the correct mount. The custom cover comes with different mounts that are attached with 4 M3x10 screws. Check lcd_support_a and lcd_support_b here: https://github.com/gregsaun/prusa_i3_bear_upgrade/tree/master/optional_parts/lcd_cover/printed_parts/stl . (note the lcd_support_x_prusa is for original Prusa frame)

domhardt commented 3 years ago

Oh I see, you are not using the correct mount. The custom cover comes with different mounts that are attached with 4 M3x10 screws. Check lcd_support_a and lcd_support_b here: https://github.com/gregsaun/prusa_i3_bear_upgrade/tree/master/optional_parts/lcd_cover/printed_parts/stl . (note the lcd_support_x_prusa is for original Prusa frame)

Oh, sorry. This is my fault then. Thank you for clarifying that. I will close this issue then. Sorry for bothering you.

Keep on the good work!