new privacy block seems to create some instability when switching on and off display outputs

My bar is configured in sway like so:

bar {
        tray_output DP-3
        status_command i3status-rs
        font pango:FreeSans, FontAwesome 9.5
}

My i3status-rs configuration is as follows:

Click to expand

``` [theme] theme = "space-villain" [icons] icons = "awesome5" [[block]] block = "privacy" [[block.driver]] name = "v4l" [[block.driver]] name = "pipewire" [[block]] block = "temperature" idle = 60 chip = "amdgpu-pci-2f00" inputs = ["edge"] format = "GPU:$average" #icons_format = " " [[block]] block = "temperature" chip = "k10temp-pci-00c3" inputs = ["Tctl"] format = "CPU:$average" #cons_format = " " [[block]] block = "custom" command = "cat /sys/devices/platform/nct6687.2592/hwmon/hwmon*/fan2_input" interval = 4 format = "P:$text" [[block]] block = "disk_space" path = "/" format = "$used.eng(w:4)/$total.eng(w:4)" info_type = "available" alert_unit = "GB" interval = 20 warning = 100.0 alert = 30.0 [[block]] block = "disk_space" path = "/spoonstorage" format = "$used.eng(w:4)/$total.eng(w:4)" info_type = "available" alert_unit = "GB" interval = 20 warning = 20.0 alert = 10.0 [[block]] block = "memory" format = "$icon $mem_used_percents" [[block]] block = "cpu" interval = 1 [[block]] block = "load" interval = 1 [[block]] block = "sound" step_width = 0 format = "$output_description { $volume| }" signal = 4 [[block]] block = "net" device = "enp39s0" format = "$ip" [[block]] block = "net" device = "enp39s0" format = "$ipv6" # [[block]] # block = "net" # device = "vpn0" # format = "$icon $ip" # inactive_format = "$icon DOWN" # These don't seem to work for iface up or down # hide_missing = true # hide_inactive = true # if_command = "/home/$HOME/.config/i3status-rust/check_vpn.bash" [[block]] block = "net" device = "enp39s0" #format = "$graph_down:3;M*_b#350 $graph_up:3;M*_b#50" format = "$speed_down.eng(prefix:M) $speed_up.eng(prefix:M)" #format = "$graph_down $graph_up" [[block]] block = "backlight" cycle = [ 45, 100 ] invert_icons = true root_scaling = 2.4 device = "ddcci1[1,2,3,4]" [[block]] block = "backlight" cycle = [ 45, 100 ] invert_icons = true root_scaling = 2.4 device = "ddcci15" missing_format = "" [[block]] block = "hueshift" hue_shifter = "wl_gammarelay_rs" format = "G:$temperature" click_temp = 4800 #min_temp = 3000 [[block]] block = "time" interval = 1 #format = "%a %d/%m %R" format = "$timestamp.datetime(f:'%a %Y-%m-%d %I:%M:%S %p')" #cons_format = " " [block.theme_overrides] idle_fg = "#FFFFFF" [[block]] block = "battery" if_command = "test -e /sys/class/power_supply/BAT0" ```

My sway output configuration looks like this (I know this isn't a sway bug report, but I want to be as thorough as possible)

Click to expand

``` output { DP-1 position 1440 1440 mode 2560x1440@165Hz DP-1 adaptive_sync off DP-2 transform 90 DP-2 position 4000 790 mode 2560x1440@165Hz DP-2 adaptive_sync off DP-3 transform 270 DP-3 position 0 790 mode 2560x1440@165Hz DP-3 adaptive_sync off DP-4 position 1440 0 mode 2560x1440@165Hz DP-4 adaptive_sync off DP-5 position 5440 1750 mode 3840x1600@144Hz DP-5 adaptive_sync on DP-5 enable DP-6 position 5440 3350 mode 2048x1536@60Hz DP-6 scale 1.5 DP-6 enable } ```

When powering off DP-5 and DP-6 (my simrig, it's all on a power switch) with the privacy block enabled, the bar will become frozen and stop updating. EDIT: It's somewhat intermittent and I can't reproduce it every time but I have never experienced this behavior before until enabling this block.

The way sway handles this is essentially the same if I ran swaymsg output DP-5 disable && swaymsg output DP-6 disable, workspaces are moved to the other enabled outputs. If I power them back on they become enabled again. The bar does not recover if I turn them back on though. I have to run swaymsg reload to get it to relaunch i3status-rs for it to recover.

This frozen state does not happen when I don't have the privacy block enabled. I have not found a good way to produce any logs for this so any suggestions you have on getting some more verbosity out of sway/i3status-rs to debug this further are welcome.

Also I appreciate that this is a somewhat unique display layout and that this problem could be something entirely due to the way sway handles outputs, however since it only impacts the bar when the privacy block is enabled I'm starting here.

Thanks!

greshake / i3status-rust

new privacy block seems to create some instability when switching on and off display outputs #2012