Open sinatosk opened 8 months ago
I have a Bafang BBSHD 1000W which uses the IAP15W4K61S4 controller
with a "Bafang USB Programming cable"
using the command as root
stcgal
output is
Protocol detected: stc15 Target model: Name: IAP15W4K61S4 Magic: F56A Code flash: 61.0 KB EEPROM flash: 0.0 KB Target frequency: 18.461 MHz Target BSL version: 7.2.5T Target wakeup frequency: 36.677 KHz Target options: reset_pin_enabled=False clock_source=internal clock_gain=high watchdog_por_enabled=False watchdog_stop_idle=False watchdog_prescale=256 low_voltage_reset=True low_voltage_threshold=4 eeprom_lvd_inhibit=True eeprom_erase_enabled=False bsl_pindetect_enabled=False por_reset_delay=short rstout_por_state=high uart2_passthrough=False uart2_pin_mode=normal cpu_core_voltage=unknown
I then later flashed the controller with the following
stcgal -P stc15 -b 57600 -l 2400 -t 18432 /path/to/code_image.bin
i didn't save the output for that but it worked. I tried it with two controllers
The package I used on Arch Linux is here version 1.10 commit
I have a Bafang BBSHD 1000W which uses the IAP15W4K61S4 controller
with a "Bafang USB Programming cable"
using the command as root
stcgaloutput is
I then later flashed the controller with the following
stcgal -P stc15 -b 57600 -l 2400 -t 18432 /path/to/code_image.bini didn't save the output for that but it worked. I tried it with two controllers
The package I used on Arch Linux is here version 1.10 commit