can this tool flash stc32g12k128 chip?

[weiqifa0]

hello,this tool can flash stc32g12k128 chip? or,how can I modify for it ?

[weiqifa0]

stcgal -P stc8d -b 1500000 -l 2400 -p /dev/tty.usbserial-110 main.hex Waiting for MCU, please cycle power: done Target model: Name: STC32G12K128 Magic: F7E3 Code flash: 128.0 KB EEPROM flash: 0.0 KB Target frequency: 11.064 MHz Target BSL version: 7.4.5U Target wakeup frequency: 33.225 KHz Target ref. voltage: 1189 mV Target mfg. date: 2022-10-20 Target options: reset_pin_enabled=False clock_gain=high watchdog_por_enabled=False watchdog_stop_idle=True watchdog_prescale=256 low_voltage_reset=True low_voltage_threshold=1 eeprom_erase_enabled=True bsl_pindetect_enabled=False por_reset_delay=long rstout_por_state=high uart1_remap=False uart2_passthrough=True uart2_pin_mode=push-pull epwm_open_drain=True program_eeprom_split=0 Loading flash: 1455 bytes (Intel HEX) Invalid input file. MCU is an MCS-251, input file MUST specify a linear base address, i.e. contain a type 04 record. More information at: https://en.wikipedia.org/wiki/Intel_HEX Disconnected! (base) crisqifawei@CRISQIFAWEI-MC0 tiny51_os %

[weiqifa0]

(base) crisqifawei@CRISQIFAWEI-MC0 tiny51_os % (base) crisqifawei@CRISQIFAWEI-MC0 tiny51_os % stcgal -v usage: stcgal [-h] [-e] [-a] [-A {dtr,rts}] [-r RESETCMD] [-P {stc89,stc89a,stc12a,stc12b,stc12,stc15a,stc15,stc8,stc8d,stc8g,usb15,auto}] [-p PORT] [-b BAUD] [-l HANDSHAKE] [-o OPTION] [-t TRIM] [-D] [-V] [code_image] [eeprom_image] stcgal: error: unrecognized arguments: -v (base) crisqifawei@CRISQIFAWEI-MC0 tiny51_os % stcgal -V stcgal 1.8 (base) crisqifawei@CRISQIFAWEI-MC0 tiny51_os %

[weiqifa0]

I see this tool is support this cpu.

[blu-blue]

stcgal -P stc8d -b 1500000 -l 2400 -p /dev/tty.usbserial-110 main.hex Waiting for MCU, please cycle power: done Target model: Name: STC32G12K128 Magic: F7E3 Code flash: 128.0 KB EEPROM flash: 0.0 KB Target frequency: 11.064 MHz Target BSL version: 7.4.5U Target wakeup frequency: 33.225 KHz Target ref. voltage: 1189 mV Target mfg. date: 2022-10-20 Target options: reset_pin_enabled=False clock_gain=high watchdog_por_enabled=False watchdog_stop_idle=True watchdog_prescale=256 low_voltage_reset=True low_voltage_threshold=1 eeprom_erase_enabled=True bsl_pindetect_enabled=False por_reset_delay=long rstout_por_state=high uart1_remap=False uart2_passthrough=True uart2_pin_mode=push-pull epwm_open_drain=True program_eeprom_split=0 Loading flash: 1455 bytes (Intel HEX) Invalid input file. MCU is an MCS-251, input file MUST specify a linear base address, i.e. contain a type 04 record. More information at: https://en.wikipedia.org/wiki/Intel_HEX Disconnected! (base) crisqifawei@CRISQIFAWEI-MC0 tiny51_os %