search

gruetter / openzwave-control-panel

Automatically exported from code.google.com/p/openzwave-control-panel
1 stars 0 forks source link

Adding more than 3 nodes isn't possible #4

Open GoogleCodeExporter opened 8 years ago

GoogleCodeExporter commented 8 years ago 
What steps will reproduce the problem?
1. Add 3 nodes via openzwave-control-panel(besides controller)
2. Adding 4th doesn't work, it gets combined with another node and both are 
switched simultaniously.
3. Expected is that last noded is added, however it doesn't show up in 
ozw-control-panel, even after closing and initializing again.

What version of the product are you using? On what operating system?
uname -a:
Linux EAUROUGE 3.0.0-12-server #20~lucid1build2-Ubuntu SMP Thu Oct 13 17:40:47 
UTC 2011 x86_64 GNU/Linux
Ubuntu Linux 10.04.2
Overview obtained via ozw-control-panel:
1*  Static Controller       Unknown: id=0086 Unknown: type=0002, id=0001                2:03:51
2   Routing Slave       Unknown: id=0060 Unknown: type=0004, id=0002            off 2:05:06
3   Routing Slave       Unknown: id=010f Unknown: type=0100, id=0104                0   2:03:53
4   Routing Slave       Unknown: id=001e Unknown: type=0002, id=0001            Home    3   2:03:51

openzwave version: Last Changed Rev: 379
openzwave-controlpanel version: Last Changed Rev: 20

Controller used: Aeon Labs Z-stick rev2(1)
Modules used:
1 Everspring 158 plugin module(2)
1 Fibaro FGS211(3)
1 Fibaro FGD211(3)
1 Homeseer HSM100-multisensor(4)
(n) denotes nodenumber.

Please provide any additional information below.
Also worth noting is that naming a node seems to be shifted by one, naming 
node2 names node3, naming node3 names node4.
Switching nodes does work as well as setting dimmer-values.

Original issue reported on code.google.com by j.hoeks...@gmail.com on 22 Jan 2012 at 8:30

GoogleCodeExporter commented 8 years ago 
To follow up on this issue, the issue with adding a module seems to lie either 
with openzwave or the controlpanel. Adding it via the controller works without 
any problem.
The naming issue seems to be a clear off by one issue, to clarify the current 
output on ozwcp:
1*  Static Controller       Unknown: id=0086 Unknown: type=0002, id=0001                22:54:52
2   Routing Slave       Unknown: id=0060 Unknown: type=0004, 
id=0002 Everspring  Home    off 22:57:53
3   Routing Slave       Unknown: id=010f Unknown: type=0100, 
id=0104 FGD211  Home    0   22:54:54
4   Routing Slave       Unknown: id=001e Unknown: type=0002, 
id=0001 EZMotion    Home    7   22:54:52
5   Routing Slave       Unknown: id=010f Unknown: type=0400, 
id=0104 FGS211  BedRoom off 22:54:56
I can name node 5 by naming it selecting node 4, so it actually names n+1 
instead of selected n.

Original comment by j.hoeks...@gmail.com on 23 Jan 2012 at 9:59

GoogleCodeExporter commented 8 years ago 
Does this still happen or has it been resolved?

Original comment by glsatz on 18 Dec 2012 at 5:29