Cannot get it to work

[reinhochstenbach]

Hi. I installed homebridge, added the bridge to my home app. Installed this enphase envoy plugin But am confused on how to proceed now. I somehow need to tell the plugin where to find the envoy I assume and how to use it? So I add new device in the plugin settings, and enter the ip mentioned by my router as the ip voor envoy. But I cannot see an accessory to add in home app. In log for homebridge I see this : [2/16/2023, 12:51:55 PM] [enphaseEnvoy] Device: 192.168.1.253 Envoy, start. [2/16/2023, 12:51:55 PM] [enphaseEnvoy] Device: 192.168.1.253 Envoy, requesting info.

[grzegorz914]

Look at this https://github.com/grzegorz914/homebridge-enphase-envoy/wiki#adding-to-homekit

[reinhochstenbach]

Each accessory needs to be manually paired. Open the Home app on your device. Tap the Home tab, then tap . Tap Add Accessory, and select I Don't Have a Code, Cannot Scan or More options. Select Your accessory and press add anyway. Enter the PIN or scan the QR code, this can be found in Homebridge UI or Homebridge logs. Complete the accessory setup.

There is no accessory to add...

[grzegorz914]

Please enable debug mode in plugin config advanced section restart HB and get the complete log

[reinhochstenbach]

Loading logs using "custom" method... CMD: pm2 logs --raw --out --lines 80 homebridge

[TAILING] Tailing last 80 lines for [homebridge] process (change the value with --lines option) /root/.pm2/logs/homebridge-out.log last 80 lines: [2/16/2023, 4:56:59 PM] [Ring] Initializing Ring platform... [2/16/2023, 4:56:59 PM] [enphaseEnvoy] Initializing enphaseEnvoy platform... [2/16/2023, 4:56:59 PM] [Ring] Configuring cached accessory d90xxxxxxxxxx Voordeur [2/16/2023, 4:56:59 PM] [Ring] [Circular] [2/16/2023, 4:56:59 PM] [Ring] Configuring cached accessory 889fdfdxxxxxx Beneden [2/16/2023, 4:56:59 PM] [Ring] [Circular] [2/16/2023, 4:56:59 PM] [Ring] Configuring cached accessory 889fdfdxxxxxx 'S-Hertogenbosch Mode [2/16/2023, 4:56:59 PM] [Ring] [Circular] [2/16/2023, 4:56:59 PM] [Ring] didFinishLaunching [2/16/2023, 4:56:59 PM] [enphaseEnvoy] didFinishLaunching [2/16/2023, 4:56:59 PM] [enphaseEnvoy] Device: xxx.xxx.x.xxx Envoy, start. [2/16/2023, 4:56:59 PM] [enphaseEnvoy] Device: xxx.xxx.x.xxx Envoy, requesting info. [2/16/2023, 4:56:59 PM] Publishing bridge accessory (name: Homebridge, publishInfo: { username: 'XX', port: 51826, pincode: '*-*-', category: 2, bind: undefined, mdns: undefined, addIdentifyingMaterial: true, advertiser: undefined }). Setup Payload: X-HM://xx Scan this code with your HomeKit app on your iOS device to pair with Homebridge:

Or enter this code with your HomeKit app on your iOS device to pair with Homebridge:

┌────────────┐     
│ xxx-xx-xxx  
└────────────┘     

[2/16/2023, 4:56:59 PM] Homebridge v1.6.0 (HAP v0.11.0) (Homebridge) is running on port 51826. [2/16/2023, 4:57:01 PM] [Ring] Found the following locations: [2/16/2023, 4:57:01 PM] [Ring] locationId: xxxxxxxx - 'S-Hertogenbosch [2/16/2023, 4:57:01 PM] [Ring] Configuring 1 cameras and 3 devices for location "'S-Hertogenbosch" - locationId: xxxxx [2/16/2023, 4:57:15 PM] [enphaseEnvoy] Device: 192.168.1.253 Envoy, start. [2/16/2023, 4:57:15 PM] [enphaseEnvoy] Device: 192.168.1.253 Envoy, requesting info. [2/16/2023, 4:57:30 PM] [enphaseEnvoy] Device: 192.168.1.253 Envoy, start. [2/16/2023, 4:57:30 PM] [enphaseEnvoy] Device: 192.168.1.253 Envoy, requesting info. [2/16/2023, 4:57:45 PM] [enphaseEnvoy] Device: 192.168.1.253 Envoy, start. [2/16/2023, 4:57:45 PM] [enphaseEnvoy] Device: 192.168.1.253 Envoy, requesting info. [2/16/2023, 4:58:00 PM] [enphaseEnvoy] Device: 192.168.1.253 Envoy, start. [2/16/2023, 4:58:00 PM] [enphaseEnvoy] Device: 192.168.1.253 Envoy, requesting info. [2/16/2023, 4:58:15 PM] [enphaseEnvoy] Device: 192.168.1.253 Envoy, start. [2/16/2023, 4:58:15 PM] [enphaseEnvoy] Device: 192.168.1.253 Envoy, requesting info. [2/16/2023, 4:58:31 PM] [enphaseEnvoy] Device: 192.168.1.253 Envoy, start. [2/16/2023, 4:58:31 PM] [enphaseEnvoy] Device: 192.168.1.253 Envoy, requesting info. [2/16/2023, 4:58:46 PM] [enphaseEnvoy] Device: 192.168.1.253 Envoy, start. [2/16/2023, 4:58:46 PM] [enphaseEnvoy] Device: 192.168.1.253 Envoy, requesting info. [2/16/2023, 4:59:01 PM] [enphaseEnvoy] Device: 192.168.1.253 Envoy, start. [2/16/2023, 4:59:01 PM] [enphaseEnvoy] Device: 192.168.1.253 Envoy, requesting info. [2/16/2023, 4:59:16 PM] [enphaseEnvoy] Device: 192.168.1.253 Envoy, start. [2/16/2023, 4:59:16 PM] [enphaseEnvoy] Device: 192.168.1.253 Envoy, requesting info.

[2/16/2023, 4:59:31 PM] [enphaseEnvoy] Device: 192.168.1.253 Envoy, start. [2/16/2023, 4:59:31 PM] [enphaseEnvoy] Device: 192.168.1.253 Envoy, requesting info. [2/16/2023, 4:59:47 PM] [enphaseEnvoy] Device: 192.168.1.253 Envoy, start. [2/16/2023, 4:59:47 PM] [enphaseEnvoy] Device: 192.168.1.253 Envoy, requesting info.

[grzegorz914]

It’s not a debug from my plugin, you need carefully read what I wrote in previous post.

[reinhochstenbach]

Ok. I try :-) Please enable debug mode in plugin config advanced section restart HB and get the complete log: I selected the settings for the plugin, enabled debug, restarted homebridge and copied what I saw in the log. Apparently there is another log where the debug for the plugin is?

So I entered shell, to find the logs for the plugin:

root@Homebridge:~/.homebridge # ls
.ring.json              auth.json               enphaseEnvoy
.uix-dashboard.json     backups                 persist
.uix-secrets            config.json
accessories             config.json-e
root@Homebridge:~/.homebridge # cd enphaseEnvoy/
root@Homebridge:~/.homebridge/enphaseEnvoy # ls
consumptionNetPowerPeak_1921681253      envoyId_1921681253
consumptionTotalPowerPeak_1921681253    productionPowerPeak_1921681253
root@Homebridge:~/.homebridge/enphaseEnvoy #

No clue as where to find the debug for the plugin?

Sorry if I am wasting your time, I am fairly new to this. Regards

[grzegorz914]

You need go to this points:

The log will be displayed in Config UI X log tab

[reinhochstenbach]

Thanks, i did those steps, but I do not have a homebridge config ui x log tab.:

[reinhochstenbach]

wow, I think i triggered something, by selecting the firmware 7.xx option and copying the enphase auth token key from the suggested site. There is tons of logs created now, but I cannot read it, it goes super fast.. :-(

[grzegorz914]

Use Controller or EVE app to display all service,, if You want to see this all values in log please enable log info in advanced settings.

[grzegorz914]

Ok, I close this as resolved.