search

grzegorz914 / homebridge-openwebif-tv

Homebridge plugin for Sat Receivers with openWebIf interface, publish as independent external platform accessory.
MIT License
6 stars 2 forks source link

Broken Automation with latest Versions 3.7.36 #47

Closed ghost closed 3 years ago

ghost commented 3 years ago

Using nodejs 15.12 and npm 7.7.4.

Same Problem as the last time. My Automation turns on my Sony TV when my recievier is turned on. But when switching the enigma on, it switches immediately off again and on and off. Goes a bit crazy :D

This brakes my automation. The last Version that works for me is 3.7.25

Greetings.

grzegorz914 commented 3 years ago

Try 3.7.37

ghost commented 3 years ago

Works again! Thank you! 🙂

ghost commented 3 years ago

Since i Update nodejs to 15.13 my problems are back again. Also with your Version 3.7.37. So i think something changed in node. The enigma is constantly turning on an off again. Would be nice if you could check on that.

Greets

grzegorz914 commented 3 years ago

latest version is 3.7.56

ghost commented 3 years ago

I know. Even with the latest Version the Enigma goes crazy.

grzegorz914 commented 3 years ago

all is tested on two box Formuler F4 and Ultimo 4K openATV 6.4 and 6.5 all working correct, may be enable debug mode and get the log.

grzegorz914 commented 3 years ago

only node 10, 12, 14, 16 are supported

ghost commented 3 years ago

Thats what the log shows:

homebridge.log (1).txt

grzegorz914 commented 3 years ago

You get some error from Your Bravia TV, are U using HDMI CEC?

ghost commented 3 years ago

No CEC is deactivated. The tv is got enabled by Homekit automation when the openwebif receiver is turned on. And thats the Problem. The Receiver keeps turning on and off on it's own.

grzegorz914 commented 3 years ago

your automation logic must be wrong because set the receiver power off direct after power on, can You get the automation logic here?

ghost commented 3 years ago

Very Basic. Receiver turns on and the automation turns on the tv. Nothing more. Even if i turn off the automation the receiver goes crazy. Trying to downgrade my node Version to 14. Will report in a minute.

grzegorz914 commented 3 years ago

try update to.57 and get feedback

ghost commented 3 years ago

Works better then before.

I deactiveded two automation and it works. So i Think it was not really your problem. Sorry for that. Will make more test this week. Closing the issue. Thank you for your Help!

Wesołych Świąt