search

gtxaspec / wz_mini_hacks

wz camera mods... make your camera better.
1.33k stars 114 forks source link

Busybox httpd only binding to localhost #675

Closed mcondren closed 1 year ago

mcondren commented 1 year ago

Hello. I just updated to the latest and added the new Web Server lines to my config file but I can't get to the web server. I used netcat on the camera and can get to it there. So I am assuming its only binding to 127.0.0.1. Not sure why. My config is below.

#wz_mini configuration

ENABLE_SELFHOSTED_MODE="true"
#### W E B CAMERA###
##THIS MODE DISABLES EVERYTHING AND IT WILL
## WORK AS A WEB CAMERA FOR YOUR PC ***ONLY***
WEB_CAM_ENABLE="false"
WEB_CAM_BIT_RATE="8000"
WEB_CAM_FPS_RATE="25"

#####NETWORKING#####
CUSTOM_HOSTNAME="frontyard"

ENABLE_USB_ETH="false"
ENABLE_USB_ETH_MODULE_AUTODETECT="true"
ENABLE_USB_ETH_MODULE_MANUAL=""

ENABLE_USB_DIRECT="false"
USB_DIRECT_MAC_ADDR="02:01:02:03:04:08"

ENABLE_USB_RNDIS="false"

ENABLE_IPV6="false"

ENABLE_WIREGUARD="false"
WIREGUARD_IPV4=""
WIREGUARD_PEER_ENDPOINT=""
WIREGUARD_PEER_PUBLIC_KEY=""
WIREGUARD_PEER_ALLOWED_IPS=""
WIREGUARD_PEER_KEEP_ALIVE=""

ENABLE_IPTABLES="false"

ENABLE_NFSv4="false"

ENABLE_RTL8189FS_DRIVER="true"
ENABLE_ATBM603X_DRIVER="true"

##### NETWORK INTERFACE BONDING #####
BONDING_ENABLED="false"
BONDING_PRIMARY_INTERFACE="eth0"
BONDING_SECONDARY_INTERFACE="wlan0"
BONDING_LINK_MONITORING_FREQ_MS="100"
BONDING_DOWN_DELAY_MS="5000"
BONDING_UP_DELAY_MS="5000"
BONDING_FAIL_OVER_MAC="0"

#####ACCESSORIES#####
REMOTE_SPOTLIGHT="false"
REMOTE_SPOTLIGHT_HOST="0.0.0.0"

#####VIDEO STREAM#####
RTSP_LOGIN="admin"
RTSP_PASSWORD="5265871"
RTSP_PORT="8554"

RTSP_HI_RES_ENABLED="false"
RTSP_HI_RES_ENABLE_AUDIO="false"
RTSP_HI_RES_FPS="20"
RTSP_HI_RES_MAX_BITRATE="2000"
RTSP_HI_RES_TARGET_BITRATE="1024"
RTSP_HI_RES_ENC_PARAMETER="2"

RTSP_LOW_RES_ENABLED="false"
RTSP_LOW_RES_ENABLE_AUDIO="false"
RTSP_LOW_RES_FPS="10"
RTSP_LOW_RES_MAX_BITRATE=""
RTSP_LOW_RES_TARGET_BITRATE=""
RTSP_LOW_RES_ENC_PARAMETER="2"

VIDEO_0_MAX_BITRATE=""
VIDEO_0_TARGET_BITRATE=""
VIDEO_0_ENC_PARAMETER=""
VIDEO_0_FPS=""

VIDEO_1_MAX_BITRATE=""
VIDEO_1_TARGET_BITRATE=""
VIDEO_1_ENC_PARAMETER=""
VIDEO_1_FPS=""

GO2RTC_SERVER_ENABLED="true"
GO2RTC_HI_RES_ENABLED="true"
GO2RTC_HI_RES_ENABLE_AUDIO="true"
GO2RTC_LOW_RES_ENABLED="true"
GO2RTC_LOW_RES_ENABLE_AUDIO="false"

#####RTMP STREAMING#####
#### REQUIRES RTSP ####
### AND RTSP AUDIO ###
RTMP_STREAM_ENABLED="false"
RTMP_STREAM_FEED="video1_unicast"
RMTP_STREAM_SERVICE="youtube"
RTMP_STREAM_DISABLE_AUDIO="false"
RTMP_STREAM_YOUTUBE_KEY=""
RTMP_STREAM_TWITCH_KEY=""
RTMP_STREAM_FACEBOOK_KEY=""

#####GENERAL#####
LIBCALLBACK_ENABLE="true"
ENABLE_SWAP="true"
ENABLE_USB_STORAGE="false"
ENABLE_EXT4="false"
ENABLE_CIFS="false"
DISABLE_FW_UPGRADE="true"
AUDIO_PROMPT_VOLUME="50"
ENABLE_MP4_WRITE="false"
NIGHT_DROP_DISABLE="true"
DISABLE_MOTOR="false"
ENABLE_FSCK_ON_BOOT="true"

#####DEBUG#####
#drops you to a shell via serial, doesn't load app_init.sh
DEBUG_ENABLED="false"
DEBUG_INITRAMFS_ENABLED="false"
DEBUG_PASSWORD="false"

####WEB####
WEB_SERVER_ENABLED="true"
WEB_SERVER_AUTH="true"
WEB_SERVER_LOGIN="admin"
WEB_SERVER_PASSWORD="XXXXX"

#####SCRIPTING#####
CUSTOM_SCRIPT_PATH=""
mcondren commented 1 year ago

Sorry for the noise. For whatever reason this seems to be a platform issue for me. The page won't load in Safari or Chrome in IOS (regardless of whether I have it set to fetch the mobile version or the desktop version of the page), but will load fine on a Desktop (Chrome). Not sure why but that fixed my issue.