bennimen
commented
4 years ago A quick sidenote: if it matters, I'm running windows 10 64-bit
Open bennimen opened 4 years ago
bennimen
commented
4 years ago A quick sidenote: if it matters, I'm running windows 10 64-bit
guillermo-navas-palencia
commented
4 years ago Hi @bennimen,
Thanks for your interest in this project. I think the best you can do is building the .dll following the steps described here: http://gnpalencia.org/cprior/getting_started.html#install-from-source. I mainly use the library on Linux, but I also tested it on Windows with Cygwin. Could you try to build your .dll and install it from source?
Guillermo
bennimen
commented
4 years ago Thanks for the response Guillermo!
I did try to compile the dll using those instructions, using both Cygwin and MinGW, as well as both 32- and 64-bit versions of python 3.7. It didn't quite work for me. The resulting compiled file seemed small compared to the one included in the github package. I understand that libraries tend to vary depending on the specs of the machine used to compile them, but the dll file that I ended up with was around 36 kb, whereas the one from the included in the package was around 360 kb; roughly a 10x difference.
Before compiling the dll and just trying to use the one from the source, I receive the original error.
Using the compiled version, it freezes on the second phase of the setup.py test at 3%, resulting in a bootloop of sorts and generating the same plot indefinitely.
Has anything like this ever happened before to your knowledge?
Thanks for the help! I was very excited when I found your project. This problem that I think your code will solve has been bugging me for months.
Hope all is well!
Ben
On Sun, Sep 6, 2020 at 10:14 PM Guillermo notifications@github.com wrote:
Hi @bennimen https://github.com/bennimen,
Thanks for your interest in this project. I think the best you can do is building the .dll following the steps described here: http://gnpalencia.org/cprior/getting_started.html#install-from-source. I mainly use the library on Linux, but I also tested it on Windows with Cygwin. Could you try to build your .dll and install it from source?
Guillermo
— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub https://github.com/guillermo-navas-palencia/cprior/issues/2#issuecomment-688146477, or unsubscribe https://github.com/notifications/unsubscribe-auth/ADGXULLD3XF5E7SY7N5NNLDSESI7DANCNFSM4Q47OW2Q .
guillermo-navas-palencia
commented
4 years ago The problem with the indefinite plot is related to Windows/pytest. I have encountered this issue in other libraries when the default option is to use plt.show() in matplotlib instead of plt.save(). If you reached that point, your compilation might be correct. Do the examples in the getting started section work for you? http://gnpalencia.org/cprior/getting_started.html#example
bennimen
commented
4 years ago That's reassuring then :).
The examples aren't working for me. Running the first example in the console, I'm not able make it past the second line to import BernoulliABTest:
from cprior import BernoulliABTest, BernoulliModel Traceback (most recent call last): File "
", line 1, in ImportError: cannot import name 'BernoulliABTest' from 'cprior' (C:\Users\New User\AppData\Local\Programs\Python\Python37-32\cprior__init__.py)
I'll see if I can dig around cprior to see why it can't import that. Is BernoulliABtest defined in the compiled library?
On Sun, Sep 6, 2020 at 10:59 PM Guillermo notifications@github.com wrote:
The problem with the indefinite plot is related to Windows/pytest. I have encountered this issue in other libraries when the default option is to use plt.show() in matplotlib instead of plt.save(). If you reached that point, your compilation might be correct. Do the examples in the getting started section work for you? http://gnpalencia.org/cprior/getting_started.html#example
— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub https://github.com/guillermo-navas-palencia/cprior/issues/2#issuecomment-688178575, or unsubscribe https://github.com/notifications/unsubscribe-auth/ADGXULNUJ2V6T7OYWXJ3STDSESOGXANCNFSM4Q47OW2Q .
guillermo-navas-palencia
commented
4 years ago OK, I see, this is an error in the docs. Try:
>>> from cprior.models import BernoulliModel
>>> from cprior.models import BernoulliABTestI think this should work. The example in the README.rst should also work.
bennimen
commented
4 years ago Guillermo! You're a wizard! That was it, thank you so much!
It ran and I received identical results to the examples.
My main reason for wanting to use your code was for the multivariate capabilities. I'm testing the other example from your github page and at the moment it seems to be calculating the iteration in the snippet of code directly after experiment.describe() call.
It's taking a while and is still running, but I imagine the calculation is pretty resource intensive.
I've very new to statistics and probabilities and I need to learn more about p-values and I need to dive into what the .rvs object could be.
I'm hoping to use your code to help me determine with a statistical significance the most probable variation to being the best amongst different variables.
I can calculate my alphas and betas.
What I was hoping to achieve was something along the lines of what this calculator does:
https://marketing.dynamicyield.com/bayesian-calculator/
And I believe once I dial in my understanding of probabilites, your code will do exactly what I'm looking for.
On Sun, Sep 6, 2020 at 11:37 PM Guillermo notifications@github.com wrote:
OK, I see, this is an error in the docs. Try:
from cprior.models import BernoulliModel>>> from cprior.models import BernoulliABTest
I think this should work
— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub https://github.com/guillermo-navas-palencia/cprior/issues/2#issuecomment-688202685, or unsubscribe https://github.com/notifications/unsubscribe-auth/ADGXULLBZLG3SVQCAJCY3RLSESSV5ANCNFSM4Q47OW2Q .
guillermo-navas-palencia
commented
4 years ago I'm glad it worked.
I think CPrior contains the main building blocks for your purposes. Let me know if you need any help going forward. On the other hand, I just ran the first example in README.rst and it took roughly 4 seconds. It might be a bit slower on Windows.
bennimen
commented
4 years ago Thank you for all of the help and responses Guillermo!
On Sun, Sep 6, 2020 at 10:14 PM Guillermo notifications@github.com wrote:
Hi @bennimen https://github.com/bennimen,
Thanks for your interest in this project. I think the best you can do is building the .dll following the steps described here: http://gnpalencia.org/cprior/getting_started.html#install-from-source. I mainly use the library on Linux, but I also tested it on Windows with Cygwin. Could you try to build your .dll and install it from source?
Guillermo
— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub https://github.com/guillermo-navas-palencia/cprior/issues/2#issuecomment-688146477, or unsubscribe https://github.com/notifications/unsubscribe-auth/ADGXULLD3XF5E7SY7N5NNLDSESI7DANCNFSM4Q47OW2Q .
Hello,
Super excited to see this project as I've been trying to figure out a solution for multivariate calculation for months!
I'm new to compiling libraries on windows. I'm getting errors when running the setup.py test.
It doesn't like the compiled .dll and I receive 15 errors. It seems to be having the same problem in each case with the .dll itself.
Has this problem arisen for anyone else?
C:\Users\New User\Downloads\Compressed\cprior-master>python setup.py test running test WARNING: Testing via this command is deprecated and will be removed in a future version. Users looking for a generic test entry point independent of test runner are encouraged to use tox. running egg_info writing cprior.egg-info\PKG-INFO writing dependency_links to cprior.egg-info\dependency_links.txt writing top-level names to cprior.egg-info\top_level.txt reading manifest file 'cprior.egg-info\SOURCES.txt' writing manifest file 'cprior.egg-info\SOURCES.txt' running build_ext ================================================= test session starts ================================================= platform win32 -- Python 3.7.3, pytest-6.0.1, py-1.9.0, pluggy-0.13.1 rootdir: C:\Users\New User\Downloads\Compressed\cprior-master collected 0 items / 15 errors
======================================================= ERRORS ======================================================== __ ERROR collecting tests/test_bernoulli.py _ tests\test_bernoulli.py:12: in
from cprior.models import BernoulliABTest
cprior\models__init.py:1: in
from .bernoulli import BernoulliABTest
cprior\models\bernoulli.py:10: in
from ..cdist import BetaABTest
cprior\cdist__init.py:1: in
from .beta import BetaABTest
cprior\cdist\beta.py:17: in
from .._lib.cprior import beta_cprior
cprior_lib\cprior.py:23: in
cprior = npct.load_library("cprior.dll", libabspath)
......\AppData\Local\Programs\Python\Python37-32\lib\site-packages\numpy\ctypeslib.py:152: in load_library
return ctypes.cdll[libpath]
......\AppData\Local\Programs\Python\Python37-32\lib\ctypes__init.py:431: in getitem
return getattr(self, name)
......\AppData\Local\Programs\Python\Python37-32\lib\ctypes__init.py:426: in getattr
dll = self._dlltype(name)
......\AppData\Local\Programs\Python\Python37-32\lib\ctypes__init.py:356: in init
self._handle = _dlopen(self._name, mode)
E OSError: [WinError 193] %1 is not a valid Win32 application
___ ERROR collecting tests/testbeta.py ____
tests\test_beta.py:10: in
from cprior._lib.cprior import beta_cprior
cprior_lib\cprior.py:23: in
cprior = npct.load_library("cprior.dll", libabspath)
......\AppData\Local\Programs\Python\Python37-32\lib\site-packages\numpy\ctypeslib.py:152: in load_library
return ctypes.cdll[libpath]
......\AppData\Local\Programs\Python\Python37-32\lib\ctypes__init.py:431: in getitem
return getattr(self, name)
......\AppData\Local\Programs\Python\Python37-32\lib\ctypes__init.py:426: in getattr__
dll = self._dlltype(name)
......\AppData\Local\Programs\Python\Python37-32\lib\ctypes__init.py:356: in init
self._handle = _dlopen(self.name, mode)
E OSError: [WinError 193] %1 is not a valid Win32 application
____ ERROR collecting tests/test_binomial.py ___
tests\test_binomial.py:12: in
from cprior.models import BinomialABTest
cprior\models\ init.py:1: in
from .bernoulli import BernoulliABTest
cprior\models\bernoulli.py:10: in
from ..cdist import BetaABTest
cprior\cdist\ init__.py:1: in
from .beta import BetaABTest
cprior\cdist\beta.py:17: in
from .._lib.cprior import beta_cprior
cprior_lib\cprior.py:23: in
cprior = npct.load_library("cprior.dll", libabspath)
......\AppData\Local\Programs\Python\Python37-32\lib\site-packages\numpy\ctypeslib.py:152: in load_library
return ctypes.cdll[libpath]
......\AppData\Local\Programs\Python\Python37-32\lib\ctypes\ init.py:431: in getitem
return getattr(self, name)
......\AppData\Local\Programs\Python\Python37-32\lib\ctypes\init.py:426: in getattr__
dll = self._dlltype(name)
......\AppData\Local\Programs\Python\Python37-32\lib\ctypes\init.py:356: in init__
self._handle = _dlopen(self._name, mode)
E OSError: [WinError 193] %1 is not a valid Win32 application
ERROR collecting tests/test_ci.py __
tests\test_ci.py:11: in
from cprior.cdist.ci import ci_interval
cprior\cdist__init.py:1: in
from .beta import BetaABTest
cprior\cdist\beta.py:17: in
from .._lib.cprior import beta_cprior
cprior_lib\cprior.py:23: in
cprior = npct.load_library("cprior.dll", libabspath)
......\AppData\Local\Programs\Python\Python37-32\lib\site-packages\numpy\ctypeslib.py:152: in load_library
return ctypes.cdll[libpath]
......\AppData\Local\Programs\Python\Python37-32\lib\ctypes__init.py:431: in getitem
return getattr(self, name)
......\AppData\Local\Programs\Python\Python37-32\lib\ctypes__init.py:426: in getattr
dll = self._dlltype(name)
......\AppData\Local\Programs\Python\Python37-32\lib\ctypes__init.py:356: in init__
self._handle = _dlopen(self._name, mode)
E OSError: [WinError 193] %1 is not a valid Win32 application
____ ERROR collecting tests/test_experiment.py __
tests\test_experiment.py:13: in
from cprior.experiment import Experiment
cprior\experiment__init.py:1: in
from .base import Experiment
cprior\experiment\base.py:16: in
from ..cdist.base import BayesMVTest
cprior\cdist__init.py:1: in
from .beta import BetaABTest
cprior\cdist\beta.py:17: in
from .._lib.cprior import beta_cprior
cprior_lib\cprior.py:23: in
cprior = npct.load_library("cprior.dll", libabspath)
......\AppData\Local\Programs\Python\Python37-32\lib\site-packages\numpy\ctypeslib.py:152: in load_library
return ctypes.cdll[libpath]
......\AppData\Local\Programs\Python\Python37-32\lib\ctypes__init.py:431: in getitem
return getattr(self, name)
......\AppData\Local\Programs\Python\Python37-32\lib\ctypes__init.py:426: in getattr
dll = self._dlltype(name)
......\AppData\Local\Programs\Python\Python37-32\lib\ctypes__init.py:356: in init
self._handle = _dlopen(self._name, mode)
E OSError: [WinError 193] %1 is not a valid Win32 application
___ ERROR collecting tests/test_exponential.py __
tests\test_exponential.py:12: in
from cprior.models import ExponentialABTest
cprior\models__init.py:1: in
from .bernoulli import BernoulliABTest
cprior\models\bernoulli.py:10: in
from ..cdist import BetaABTest
cprior\cdist__init.py:1: in
from .beta import BetaABTest
cprior\cdist\beta.py:17: in
from .._lib.cprior import beta_cprior
cprior_lib\cprior.py:23: in
cprior = npct.load_library("cprior.dll", libabspath)
......\AppData\Local\Programs\Python\Python37-32\lib\site-packages\numpy\ctypeslib.py:152: in load_library
return ctypes.cdll[libpath]
......\AppData\Local\Programs\Python\Python37-32\lib\ctypes__init.py:431: in getitem
return getattr(self, name)
......\AppData\Local\Programs\Python\Python37-32\lib\ctypes__init.py:426: in getattr
dll = self._dlltype(name)
......\AppData\Local\Programs\Python\Python37-32\lib\ctypes__init.py:356: in init__
self._handle = _dlopen(self._name, mode)
E OSError: [WinError 193] %1 is not a valid Win32 application
____ ERROR collecting tests/testgamma.py ____
tests\test_gamma.py:10: in
from cprior.cdist import GammaABTest
cprior\cdist__init.py:1: in
from .beta import BetaABTest
cprior\cdist\beta.py:17: in
from .._lib.cprior import beta_cprior
cprior_lib\cprior.py:23: in
cprior = npct.load_library("cprior.dll", libabspath)
......\AppData\Local\Programs\Python\Python37-32\lib\site-packages\numpy\ctypeslib.py:152: in load_library
return ctypes.cdll[libpath]
......\AppData\Local\Programs\Python\Python37-32\lib\ctypes__init.py:431: in getitem
return getattr(self, name)
......\AppData\Local\Programs\Python\Python37-32\lib\ctypes__init.py:426: in getattr
dll = self._dlltype(name)
......\AppData\Local\Programs\Python\Python37-32\lib\ctypes__init.py:356: in init__
self._handle = _dlopen(self._name, mode)
E OSError: [WinError 193] %1 is not a valid Win32 application
____ ERROR collecting tests/test_geometric.py _
tests\test_geometric.py:12: in
from cprior.models import BernoulliModel
cprior\models__init.py:1: in
from .bernoulli import BernoulliABTest
cprior\models\bernoulli.py:10: in
from ..cdist import BetaABTest
cprior\cdist__init.py:1: in
from .beta import BetaABTest
cprior\cdist\beta.py:17: in
from .._lib.cprior import beta_cprior
cprior_lib\cprior.py:23: in
cprior = npct.load_library("cprior.dll", libabspath)
......\AppData\Local\Programs\Python\Python37-32\lib\site-packages\numpy\ctypeslib.py:152: in load_library
return ctypes.cdll[libpath]
......\AppData\Local\Programs\Python\Python37-32\lib\ctypes\ init.py:431: in getitem
return getattr(self, name)
......\AppData\Local\Programs\Python\Python37-32\lib\ctypes\init.py:426: in getattr__
dll = self._dlltype(name)
......\AppData\Local\Programs\Python\Python37-32\lib\ctypes\ init.py:356: in init__
self._handle = _dlopen(self._name, mode)
E OSError: [WinError 193] %1 is not a valid Win32 application
ERROR collecting tests/test_lognormal.py _
tests\test_lognormal.py:12: in
from cprior.models import LogNormalABTest
cprior\models__init.py:1: in
from .bernoulli import BernoulliABTest
cprior\models\bernoulli.py:10: in
from ..cdist import BetaABTest
cprior\cdist\ init__.py:1: in
from .beta import BetaABTest
cprior\cdist\beta.py:17: in
from .._lib.cprior import beta_cprior
cprior_lib\cprior.py:23: in
cprior = npct.load_library("cprior.dll", libabspath)
......\AppData\Local\Programs\Python\Python37-32\lib\site-packages\numpy\ctypeslib.py:152: in load_library
return ctypes.cdll[libpath]
......\AppData\Local\Programs\Python\Python37-32\lib\ctypes\ init.py:431: in getitem
return getattr(self, name)
......\AppData\Local\Programs\Python\Python37-32\lib\ctypes\init.py:426: in getattr__
dll = self._dlltype(name)
......\AppData\Local\Programs\Python\Python37-32\lib\ctypes\init.py:356: in init__
self._handle = _dlopen(self._name, mode)
E OSError: [WinError 193] %1 is not a valid Win32 application
ERROR collecting tests/test_negative_binomial.py _
tests\test_negative_binomial.py:12: in
from cprior.models import BinomialModel
cprior\models__init.py:1: in
from .bernoulli import BernoulliABTest
cprior\models\bernoulli.py:10: in
from ..cdist import BetaABTest
cprior\cdist__init.py:1: in
from .beta import BetaABTest
cprior\cdist\beta.py:17: in
from .._lib.cprior import beta_cprior
cprior_lib\cprior.py:23: in
cprior = npct.load_library("cprior.dll", libabspath)
......\AppData\Local\Programs\Python\Python37-32\lib\site-packages\numpy\ctypeslib.py:152: in load_library
return ctypes.cdll[libpath]
......\AppData\Local\Programs\Python\Python37-32\lib\ctypes__init.py:431: in getitem
return getattr(self, name)
......\AppData\Local\Programs\Python\Python37-32\lib\ctypes__init.py:426: in getattr__
dll = self._dlltype(name)
......\AppData\Local\Programs\Python\Python37-32\lib\ctypes__init.py:356: in init__
self._handle = _dlopen(self._name, mode)
E OSError: [WinError 193] %1 is not a valid Win32 application
ERROR collecting tests/test_normal.py ____
tests\test_normal.py:12: in
from cprior.models import LogNormalModel
cprior\models__init.py:1: in
from .bernoulli import BernoulliABTest
cprior\models\bernoulli.py:10: in
from ..cdist import BetaABTest
cprior\cdist__init.py:1: in
from .beta import BetaABTest
cprior\cdist\beta.py:17: in
from .._lib.cprior import beta_cprior
cprior_lib\cprior.py:23: in
cprior = npct.load_library("cprior.dll", libabspath)
......\AppData\Local\Programs\Python\Python37-32\lib\site-packages\numpy\ctypeslib.py:152: in load_library
return ctypes.cdll[libpath]
......\AppData\Local\Programs\Python\Python37-32\lib\ctypes__init.py:431: in getitem
return getattr(self, name)
......\AppData\Local\Programs\Python\Python37-32\lib\ctypes__init.py:426: in getattr
dll = self._dlltype(name)
......\AppData\Local\Programs\Python\Python37-32\lib\ctypes__init.py:356: in init
self._handle = _dlopen(self._name, mode)
E OSError: [WinError 193] %1 is not a valid Win32 application
___ ERROR collecting tests/test_normal_inversegamma.py ____
tests\test_normal_inverse_gamma.py:12: in
from cprior.cdist import NormalInverseGammaABTest
cprior\cdist__init.py:1: in
from .beta import BetaABTest
cprior\cdist\beta.py:17: in
from .._lib.cprior import beta_cprior
cprior_lib\cprior.py:23: in
cprior = npct.load_library("cprior.dll", libabspath)
......\AppData\Local\Programs\Python\Python37-32\lib\site-packages\numpy\ctypeslib.py:152: in load_library
return ctypes.cdll[libpath]
......\AppData\Local\Programs\Python\Python37-32\lib\ctypes__init.py:431: in getitem
return getattr(self, name)
......\AppData\Local\Programs\Python\Python37-32\lib\ctypes__init.py:426: in getattr
dll = self._dlltype(name)
......\AppData\Local\Programs\Python\Python37-32\lib\ctypes__init.py:356: in init__
self._handle = _dlopen(self._name, mode)
E OSError: [WinError 193] %1 is not a valid Win32 application
__ ERROR collecting tests/test_pareto.py ____
tests\test_pareto.py:10: in
from cprior.cdist import ParetoABTest
cprior\cdist__init.py:1: in
from .beta import BetaABTest
cprior\cdist\beta.py:17: in
from .._lib.cprior import beta_cprior
cprior_lib\cprior.py:23: in
cprior = npct.load_library("cprior.dll", libabspath)
......\AppData\Local\Programs\Python\Python37-32\lib\site-packages\numpy\ctypeslib.py:152: in load_library
return ctypes.cdll[libpath]
......\AppData\Local\Programs\Python\Python37-32\lib\ctypes__init.py:431: in getitem
return getattr(self, name)
......\AppData\Local\Programs\Python\Python37-32\lib\ctypes__init.py:426: in getattr
dll = self._dlltype(name)
......\AppData\Local\Programs\Python\Python37-32\lib\ctypes__init.py:356: in init
self._handle = _dlopen(self.name, mode)
E OSError: [WinError 193] %1 is not a valid Win32 application
____ ERROR collecting tests/test_poisson.py __
tests\test_poisson.py:12: in
from cprior.models import ExponentialModel
cprior\models__init.py:1: in
from .bernoulli import BernoulliABTest
cprior\models\bernoulli.py:10: in
from ..cdist import BetaABTest
cprior\cdist__init.py:1: in
from .beta import BetaABTest
cprior\cdist\beta.py:17: in
from .._lib.cprior import beta_cprior
cprior_lib\cprior.py:23: in
cprior = npct.load_library("cprior.dll", libabspath)
......\AppData\Local\Programs\Python\Python37-32\lib\site-packages\numpy\ctypeslib.py:152: in load_library
return ctypes.cdll[libpath]
......\AppData\Local\Programs\Python\Python37-32\lib\ctypes__init.py:431: in getitem
return getattr(self, name)
......\AppData\Local\Programs\Python\Python37-32\lib\ctypes__init.py:426: in getattr
dll = self._dlltype(name)
......\AppData\Local\Programs\Python\Python37-32\lib\ctypes__init.py:356: in init
self._handle = _dlopen(self.name, mode)
E OSError: [WinError 193] %1 is not a valid Win32 application
____ ERROR collecting tests/test_uniform.py ____
tests\test_uniform.py:12: in
from cprior.models import UniformABTest
cprior\models__init.py:1: in
from .bernoulli import BernoulliABTest
cprior\models\bernoulli.py:10: in
from ..cdist import BetaABTest
cprior\cdist__init.py:1: in
from .beta import BetaABTest
cprior\cdist\beta.py:17: in
from .._lib.cprior import beta_cprior
cprior_lib\cprior.py:23: in
cprior = npct.load_library("cprior.dll", libabspath)
......\AppData\Local\Programs\Python\Python37-32\lib\site-packages\numpy\ctypeslib.py:152: in load_library
return ctypes.cdll[libpath]
......\AppData\Local\Programs\Python\Python37-32\lib\ctypes\ init.py:431: in getitem
return getattr(self, name)
......\AppData\Local\Programs\Python\Python37-32\lib\ctypes\init.py:426: in getattr__
dll = self._dlltype(name)
......\AppData\Local\Programs\Python\Python37-32\lib\ctypes\ init.py:356: in init__
self._handle = _dlopen(self._name, mode)
E OSError: [WinError 193] %1 is not a valid Win32 application
=============================================== short test summary info ===============================================
ERROR tests/test_bernoulli.py - OSError: [WinError 193] %1 is not a valid Win32 application
ERROR tests/test_beta.py - OSError: [WinError 193] %1 is not a valid Win32 application
ERROR tests/test_binomial.py - OSError: [WinError 193] %1 is not a valid Win32 application
ERROR tests/test_ci.py - OSError: [WinError 193] %1 is not a valid Win32 application
ERROR tests/test_experiment.py - OSError: [WinError 193] %1 is not a valid Win32 application
ERROR tests/test_exponential.py - OSError: [WinError 193] %1 is not a valid Win32 application
ERROR tests/test_gamma.py - OSError: [WinError 193] %1 is not a valid Win32 application
ERROR tests/test_geometric.py - OSError: [WinError 193] %1 is not a valid Win32 application
ERROR tests/test_lognormal.py - OSError: [WinError 193] %1 is not a valid Win32 application
ERROR tests/test_negative_binomial.py - OSError: [WinError 193] %1 is not a valid Win32 application
ERROR tests/test_normal.py - OSError: [WinError 193] %1 is not a valid Win32 application
ERROR tests/test_normal_inverse_gamma.py - OSError: [WinError 193] %1 is not a valid Win32 application
ERROR tests/test_pareto.py - OSError: [WinError 193] %1 is not a valid Win32 application
ERROR tests/test_poisson.py - OSError: [WinError 193] %1 is not a valid Win32 application
ERROR tests/test_uniform.py - OSError: [WinError 193] %1 is not a valid Win32 application
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Interrupted: 15 errors during collection !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
================================================= 15 errors in 4.42s ==================================================
C:\Users\New User\Downloads\Compressed\cprior-master>python setup.py test running test WARNING: Testing via this command is deprecated and will be removed in a future version. Users looking for a generic test entry point independent of test runner are encouraged to use tox. running egg_info writing cprior.egg-info\PKG-INFO writing dependency_links to cprior.egg-info\dependency_links.txt writing top-level names to cprior.egg-info\top_level.txt reading manifest file 'cprior.egg-info\SOURCES.txt' writing manifest file 'cprior.egg-info\SOURCES.txt' running build_ext ================================================= test session starts ================================================= platform win32 -- Python 3.7.3, pytest-6.0.1, py-1.9.0, pluggy-0.13.1 rootdir: C:\Users\New User\Downloads\Compressed\cprior-master collected 0 items / 15 errors
======================================================= ERRORS ======================================================== __ ERROR collecting tests/test_bernoulli.py _ tests\test_bernoulli.py:12: in
from cprior.models import BernoulliABTest
cprior\models__init.py:1: in
from .bernoulli import BernoulliABTest
cprior\models\bernoulli.py:10: in
from ..cdist import BetaABTest
cprior\cdist__init.py:1: in
from .beta import BetaABTest
cprior\cdist\beta.py:17: in
from .._lib.cprior import beta_cprior
cprior_lib\cprior.py:23: in
cprior = npct.load_library("cprior.dll", libabspath)
......\AppData\Local\Programs\Python\Python37-32\lib\site-packages\numpy\ctypeslib.py:152: in load_library
return ctypes.cdll[libpath]
......\AppData\Local\Programs\Python\Python37-32\lib\ctypes__init.py:431: in getitem
return getattr(self, name)
......\AppData\Local\Programs\Python\Python37-32\lib\ctypes__init.py:426: in getattr
dll = self._dlltype(name)
......\AppData\Local\Programs\Python\Python37-32\lib\ctypes__init.py:356: in init
self._handle = _dlopen(self._name, mode)
E OSError: [WinError 193] %1 is not a valid Win32 application
___ ERROR collecting tests/testbeta.py ____
tests\test_beta.py:10: in
from cprior._lib.cprior import beta_cprior
cprior_lib\cprior.py:23: in
cprior = npct.load_library("cprior.dll", libabspath)
......\AppData\Local\Programs\Python\Python37-32\lib\site-packages\numpy\ctypeslib.py:152: in load_library
return ctypes.cdll[libpath]
......\AppData\Local\Programs\Python\Python37-32\lib\ctypes__init.py:431: in getitem
return getattr(self, name)
......\AppData\Local\Programs\Python\Python37-32\lib\ctypes__init.py:426: in getattr__
dll = self._dlltype(name)
......\AppData\Local\Programs\Python\Python37-32\lib\ctypes__init.py:356: in init
self._handle = _dlopen(self.name, mode)
E OSError: [WinError 193] %1 is not a valid Win32 application
____ ERROR collecting tests/test_binomial.py ___
tests\test_binomial.py:12: in
from cprior.models import BinomialABTest
cprior\models\ init.py:1: in
from .bernoulli import BernoulliABTest
cprior\models\bernoulli.py:10: in
from ..cdist import BetaABTest
cprior\cdist\ init__.py:1: in
from .beta import BetaABTest
cprior\cdist\beta.py:17: in
from .._lib.cprior import beta_cprior
cprior_lib\cprior.py:23: in
cprior = npct.load_library("cprior.dll", libabspath)
......\AppData\Local\Programs\Python\Python37-32\lib\site-packages\numpy\ctypeslib.py:152: in load_library
return ctypes.cdll[libpath]
......\AppData\Local\Programs\Python\Python37-32\lib\ctypes\ init.py:431: in getitem
return getattr(self, name)
......\AppData\Local\Programs\Python\Python37-32\lib\ctypes\init.py:426: in getattr__
dll = self._dlltype(name)
......\AppData\Local\Programs\Python\Python37-32\lib\ctypes\init.py:356: in init__
self._handle = _dlopen(self._name, mode)
E OSError: [WinError 193] %1 is not a valid Win32 application
ERROR collecting tests/test_ci.py __
tests\test_ci.py:11: in
from cprior.cdist.ci import ci_interval
cprior\cdist__init.py:1: in
from .beta import BetaABTest
cprior\cdist\beta.py:17: in
from .._lib.cprior import beta_cprior
cprior_lib\cprior.py:23: in
cprior = npct.load_library("cprior.dll", libabspath)
......\AppData\Local\Programs\Python\Python37-32\lib\site-packages\numpy\ctypeslib.py:152: in load_library
return ctypes.cdll[libpath]
......\AppData\Local\Programs\Python\Python37-32\lib\ctypes__init.py:431: in getitem
return getattr(self, name)
......\AppData\Local\Programs\Python\Python37-32\lib\ctypes__init.py:426: in getattr
dll = self._dlltype(name)
......\AppData\Local\Programs\Python\Python37-32\lib\ctypes__init.py:356: in init__
self._handle = _dlopen(self._name, mode)
E OSError: [WinError 193] %1 is not a valid Win32 application
____ ERROR collecting tests/test_experiment.py __
tests\test_experiment.py:13: in
from cprior.experiment import Experiment
cprior\experiment__init.py:1: in
from .base import Experiment
cprior\experiment\base.py:16: in
from ..cdist.base import BayesMVTest
cprior\cdist__init.py:1: in
from .beta import BetaABTest
cprior\cdist\beta.py:17: in
from .._lib.cprior import beta_cprior
cprior_lib\cprior.py:23: in
cprior = npct.load_library("cprior.dll", libabspath)
......\AppData\Local\Programs\Python\Python37-32\lib\site-packages\numpy\ctypeslib.py:152: in load_library
return ctypes.cdll[libpath]
......\AppData\Local\Programs\Python\Python37-32\lib\ctypes__init.py:431: in getitem
return getattr(self, name)
......\AppData\Local\Programs\Python\Python37-32\lib\ctypes__init.py:426: in getattr
dll = self._dlltype(name)
......\AppData\Local\Programs\Python\Python37-32\lib\ctypes__init.py:356: in init
self._handle = _dlopen(self._name, mode)
E OSError: [WinError 193] %1 is not a valid Win32 application
___ ERROR collecting tests/test_exponential.py __
tests\test_exponential.py:12: in
from cprior.models import ExponentialABTest
cprior\models__init.py:1: in
from .bernoulli import BernoulliABTest
cprior\models\bernoulli.py:10: in
from ..cdist import BetaABTest
cprior\cdist__init.py:1: in
from .beta import BetaABTest
cprior\cdist\beta.py:17: in
from .._lib.cprior import beta_cprior
cprior_lib\cprior.py:23: in
cprior = npct.load_library("cprior.dll", libabspath)
......\AppData\Local\Programs\Python\Python37-32\lib\site-packages\numpy\ctypeslib.py:152: in load_library
return ctypes.cdll[libpath]
......\AppData\Local\Programs\Python\Python37-32\lib\ctypes__init.py:431: in getitem
return getattr(self, name)
......\AppData\Local\Programs\Python\Python37-32\lib\ctypes__init.py:426: in getattr
dll = self._dlltype(name)
......\AppData\Local\Programs\Python\Python37-32\lib\ctypes__init.py:356: in init__
self._handle = _dlopen(self._name, mode)
E OSError: [WinError 193] %1 is not a valid Win32 application
____ ERROR collecting tests/testgamma.py ____
tests\test_gamma.py:10: in
from cprior.cdist import GammaABTest
cprior\cdist__init.py:1: in
from .beta import BetaABTest
cprior\cdist\beta.py:17: in
from .._lib.cprior import beta_cprior
cprior_lib\cprior.py:23: in
cprior = npct.load_library("cprior.dll", libabspath)
......\AppData\Local\Programs\Python\Python37-32\lib\site-packages\numpy\ctypeslib.py:152: in load_library
return ctypes.cdll[libpath]
......\AppData\Local\Programs\Python\Python37-32\lib\ctypes__init.py:431: in getitem
return getattr(self, name)
......\AppData\Local\Programs\Python\Python37-32\lib\ctypes__init.py:426: in getattr
dll = self._dlltype(name)
......\AppData\Local\Programs\Python\Python37-32\lib\ctypes__init.py:356: in init__
self._handle = _dlopen(self._name, mode)
E OSError: [WinError 193] %1 is not a valid Win32 application
____ ERROR collecting tests/test_geometric.py _
tests\test_geometric.py:12: in
from cprior.models import BernoulliModel
cprior\models__init.py:1: in
from .bernoulli import BernoulliABTest
cprior\models\bernoulli.py:10: in
from ..cdist import BetaABTest
cprior\cdist__init.py:1: in
from .beta import BetaABTest
cprior\cdist\beta.py:17: in
from .._lib.cprior import beta_cprior
cprior_lib\cprior.py:23: in
cprior = npct.load_library("cprior.dll", libabspath)
......\AppData\Local\Programs\Python\Python37-32\lib\site-packages\numpy\ctypeslib.py:152: in load_library
return ctypes.cdll[libpath]
......\AppData\Local\Programs\Python\Python37-32\lib\ctypes\ init.py:431: in getitem
return getattr(self, name)
......\AppData\Local\Programs\Python\Python37-32\lib\ctypes\init.py:426: in getattr__
dll = self._dlltype(name)
......\AppData\Local\Programs\Python\Python37-32\lib\ctypes\ init.py:356: in init__
self._handle = _dlopen(self._name, mode)
E OSError: [WinError 193] %1 is not a valid Win32 application
ERROR collecting tests/test_lognormal.py _
tests\test_lognormal.py:12: in
from cprior.models import LogNormalABTest
cprior\models__init.py:1: in
from .bernoulli import BernoulliABTest
cprior\models\bernoulli.py:10: in
from ..cdist import BetaABTest
cprior\cdist\ init__.py:1: in
from .beta import BetaABTest
cprior\cdist\beta.py:17: in
from .._lib.cprior import beta_cprior
cprior_lib\cprior.py:23: in
cprior = npct.load_library("cprior.dll", libabspath)
......\AppData\Local\Programs\Python\Python37-32\lib\site-packages\numpy\ctypeslib.py:152: in load_library
return ctypes.cdll[libpath]
......\AppData\Local\Programs\Python\Python37-32\lib\ctypes\ init.py:431: in getitem
return getattr(self, name)
......\AppData\Local\Programs\Python\Python37-32\lib\ctypes\init.py:426: in getattr__
dll = self._dlltype(name)
......\AppData\Local\Programs\Python\Python37-32\lib\ctypes\init.py:356: in init__
self._handle = _dlopen(self._name, mode)
E OSError: [WinError 193] %1 is not a valid Win32 application
ERROR collecting tests/test_negative_binomial.py _
tests\test_negative_binomial.py:12: in
from cprior.models import BinomialModel
cprior\models__init.py:1: in
from .bernoulli import BernoulliABTest
cprior\models\bernoulli.py:10: in
from ..cdist import BetaABTest
cprior\cdist__init.py:1: in
from .beta import BetaABTest
cprior\cdist\beta.py:17: in
from .._lib.cprior import beta_cprior
cprior_lib\cprior.py:23: in
cprior = npct.load_library("cprior.dll", libabspath)
......\AppData\Local\Programs\Python\Python37-32\lib\site-packages\numpy\ctypeslib.py:152: in load_library
return ctypes.cdll[libpath]
......\AppData\Local\Programs\Python\Python37-32\lib\ctypes__init.py:431: in getitem
return getattr(self, name)
......\AppData\Local\Programs\Python\Python37-32\lib\ctypes__init.py:426: in getattr__
dll = self._dlltype(name)
......\AppData\Local\Programs\Python\Python37-32\lib\ctypes__init.py:356: in init__
self._handle = _dlopen(self._name, mode)
E OSError: [WinError 193] %1 is not a valid Win32 application
ERROR collecting tests/test_normal.py ____
tests\test_normal.py:12: in
from cprior.models import LogNormalModel
cprior\models__init.py:1: in
from .bernoulli import BernoulliABTest
cprior\models\bernoulli.py:10: in
from ..cdist import BetaABTest
cprior\cdist__init.py:1: in
from .beta import BetaABTest
cprior\cdist\beta.py:17: in
from .._lib.cprior import beta_cprior
cprior_lib\cprior.py:23: in
cprior = npct.load_library("cprior.dll", libabspath)
......\AppData\Local\Programs\Python\Python37-32\lib\site-packages\numpy\ctypeslib.py:152: in load_library
return ctypes.cdll[libpath]
......\AppData\Local\Programs\Python\Python37-32\lib\ctypes__init.py:431: in getitem
return getattr(self, name)
......\AppData\Local\Programs\Python\Python37-32\lib\ctypes__init.py:426: in getattr
dll = self._dlltype(name)
......\AppData\Local\Programs\Python\Python37-32\lib\ctypes__init.py:356: in init
self._handle = _dlopen(self._name, mode)
E OSError: [WinError 193] %1 is not a valid Win32 application
___ ERROR collecting tests/test_normal_inversegamma.py ____
tests\test_normal_inverse_gamma.py:12: in
from cprior.cdist import NormalInverseGammaABTest
cprior\cdist__init.py:1: in
from .beta import BetaABTest
cprior\cdist\beta.py:17: in
from .._lib.cprior import beta_cprior
cprior_lib\cprior.py:23: in
cprior = npct.load_library("cprior.dll", libabspath)
......\AppData\Local\Programs\Python\Python37-32\lib\site-packages\numpy\ctypeslib.py:152: in load_library
return ctypes.cdll[libpath]
......\AppData\Local\Programs\Python\Python37-32\lib\ctypes__init.py:431: in getitem
return getattr(self, name)
......\AppData\Local\Programs\Python\Python37-32\lib\ctypes__init.py:426: in getattr
dll = self._dlltype(name)
......\AppData\Local\Programs\Python\Python37-32\lib\ctypes__init.py:356: in init__
self._handle = _dlopen(self._name, mode)
E OSError: [WinError 193] %1 is not a valid Win32 application
__ ERROR collecting tests/test_pareto.py ____
tests\test_pareto.py:10: in
from cprior.cdist import ParetoABTest
cprior\cdist__init.py:1: in
from .beta import BetaABTest
cprior\cdist\beta.py:17: in
from .._lib.cprior import beta_cprior
cprior_lib\cprior.py:23: in
cprior = npct.load_library("cprior.dll", libabspath)
......\AppData\Local\Programs\Python\Python37-32\lib\site-packages\numpy\ctypeslib.py:152: in load_library
return ctypes.cdll[libpath]
......\AppData\Local\Programs\Python\Python37-32\lib\ctypes__init.py:431: in getitem
return getattr(self, name)
......\AppData\Local\Programs\Python\Python37-32\lib\ctypes__init.py:426: in getattr
dll = self._dlltype(name)
......\AppData\Local\Programs\Python\Python37-32\lib\ctypes__init.py:356: in init
self._handle = _dlopen(self.name, mode)
E OSError: [WinError 193] %1 is not a valid Win32 application
____ ERROR collecting tests/test_poisson.py __
tests\test_poisson.py:12: in
from cprior.models import ExponentialModel
cprior\models__init.py:1: in
from .bernoulli import BernoulliABTest
cprior\models\bernoulli.py:10: in
from ..cdist import BetaABTest
cprior\cdist__init.py:1: in
from .beta import BetaABTest
cprior\cdist\beta.py:17: in
from .._lib.cprior import beta_cprior
cprior_lib\cprior.py:23: in
cprior = npct.load_library("cprior.dll", libabspath)
......\AppData\Local\Programs\Python\Python37-32\lib\site-packages\numpy\ctypeslib.py:152: in load_library
return ctypes.cdll[libpath]
......\AppData\Local\Programs\Python\Python37-32\lib\ctypes__init.py:431: in getitem
return getattr(self, name)
......\AppData\Local\Programs\Python\Python37-32\lib\ctypes__init.py:426: in getattr
dll = self._dlltype(name)
......\AppData\Local\Programs\Python\Python37-32\lib\ctypes__init.py:356: in init
self._handle = _dlopen(self.name, mode)
E OSError: [WinError 193] %1 is not a valid Win32 application
____ ERROR collecting tests/test_uniform.py ____
tests\test_uniform.py:12: in
from cprior.models import UniformABTest
cprior\models__init.py:1: in
from .bernoulli import BernoulliABTest
cprior\models\bernoulli.py:10: in
from ..cdist import BetaABTest
cprior\cdist__init.py:1: in
from .beta import BetaABTest
cprior\cdist\beta.py:17: in
from .._lib.cprior import beta_cprior
cprior_lib\cprior.py:23: in
cprior = npct.load_library("cprior.dll", libabspath)
......\AppData\Local\Programs\Python\Python37-32\lib\site-packages\numpy\ctypeslib.py:152: in load_library
return ctypes.cdll[libpath]
......\AppData\Local\Programs\Python\Python37-32\lib\ctypes\ init.py:431: in getitem
return getattr(self, name)
......\AppData\Local\Programs\Python\Python37-32\lib\ctypes\init.py:426: in getattr__
dll = self._dlltype(name)
......\AppData\Local\Programs\Python\Python37-32\lib\ctypes\ init.py:356: in init__
self._handle = _dlopen(self._name, mode)
E OSError: [WinError 193] %1 is not a valid Win32 application
=============================================== short test summary info ===============================================
ERROR tests/test_bernoulli.py - OSError: [WinError 193] %1 is not a valid Win32 application
ERROR tests/test_beta.py - OSError: [WinError 193] %1 is not a valid Win32 application
ERROR tests/test_binomial.py - OSError: [WinError 193] %1 is not a valid Win32 application
ERROR tests/test_ci.py - OSError: [WinError 193] %1 is not a valid Win32 application
ERROR tests/test_experiment.py - OSError: [WinError 193] %1 is not a valid Win32 application
ERROR tests/test_exponential.py - OSError: [WinError 193] %1 is not a valid Win32 application
ERROR tests/test_gamma.py - OSError: [WinError 193] %1 is not a valid Win32 application
ERROR tests/test_geometric.py - OSError: [WinError 193] %1 is not a valid Win32 application
ERROR tests/test_lognormal.py - OSError: [WinError 193] %1 is not a valid Win32 application
ERROR tests/test_negative_binomial.py - OSError: [WinError 193] %1 is not a valid Win32 application
ERROR tests/test_normal.py - OSError: [WinError 193] %1 is not a valid Win32 application
ERROR tests/test_normal_inverse_gamma.py - OSError: [WinError 193] %1 is not a valid Win32 application
ERROR tests/test_pareto.py - OSError: [WinError 193] %1 is not a valid Win32 application
ERROR tests/test_poisson.py - OSError: [WinError 193] %1 is not a valid Win32 application
ERROR tests/test_uniform.py - OSError: [WinError 193] %1 is not a valid Win32 application
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Interrupted: 15 errors during collection !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
================================================= 15 errors in 4.38s ==================================================
C:\Users\New User\Downloads\Compressed\cprior-master>python setup.py test running test WARNING: Testing via this command is deprecated and will be removed in a future version. Users looking for a generic test entry point independent of test runner are encouraged to use tox. running egg_info writing cprior.egg-info\PKG-INFO writing dependency_links to cprior.egg-info\dependency_links.txt writing top-level names to cprior.egg-info\top_level.txt reading manifest file 'cprior.egg-info\SOURCES.txt' writing manifest file 'cprior.egg-info\SOURCES.txt' running build_ext ================================================= test session starts ================================================= platform win32 -- Python 3.7.3, pytest-6.0.1, py-1.9.0, pluggy-0.13.1 rootdir: C:\Users\New User\Downloads\Compressed\cprior-master collected 0 items / 15 errors
======================================================= ERRORS ======================================================== __ ERROR collecting tests/test_bernoulli.py _ tests\test_bernoulli.py:12: in
from cprior.models import BernoulliABTest
cprior\models__init.py:1: in
from .bernoulli import BernoulliABTest
cprior\models\bernoulli.py:10: in
from ..cdist import BetaABTest
cprior\cdist__init.py:1: in
from .beta import BetaABTest
cprior\cdist\beta.py:17: in
from .._lib.cprior import beta_cprior
cprior_lib\cprior.py:23: in
cprior = npct.load_library("cprior.dll", libabspath)
......\AppData\Local\Programs\Python\Python37-32\lib\site-packages\numpy\ctypeslib.py:152: in load_library
return ctypes.cdll[libpath]
......\AppData\Local\Programs\Python\Python37-32\lib\ctypes__init.py:431: in getitem
return getattr(self, name)
......\AppData\Local\Programs\Python\Python37-32\lib\ctypes__init.py:426: in getattr
dll = self._dlltype(name)
......\AppData\Local\Programs\Python\Python37-32\lib\ctypes__init.py:356: in init
self._handle = _dlopen(self._name, mode)
E OSError: [WinError 193] %1 is not a valid Win32 application
___ ERROR collecting tests/testbeta.py ____
tests\test_beta.py:10: in
from cprior._lib.cprior import beta_cprior
cprior_lib\cprior.py:23: in
cprior = npct.load_library("cprior.dll", libabspath)
......\AppData\Local\Programs\Python\Python37-32\lib\site-packages\numpy\ctypeslib.py:152: in load_library
return ctypes.cdll[libpath]
......\AppData\Local\Programs\Python\Python37-32\lib\ctypes__init.py:431: in getitem
return getattr(self, name)
......\AppData\Local\Programs\Python\Python37-32\lib\ctypes__init.py:426: in getattr__
dll = self._dlltype(name)
......\AppData\Local\Programs\Python\Python37-32\lib\ctypes__init.py:356: in init
self._handle = _dlopen(self.name, mode)
E OSError: [WinError 193] %1 is not a valid Win32 application
____ ERROR collecting tests/test_binomial.py ___
tests\test_binomial.py:12: in
from cprior.models import BinomialABTest
cprior\models\ init.py:1: in
from .bernoulli import BernoulliABTest
cprior\models\bernoulli.py:10: in
from ..cdist import BetaABTest
cprior\cdist\ init__.py:1: in
from .beta import BetaABTest
cprior\cdist\beta.py:17: in
from .._lib.cprior import beta_cprior
cprior_lib\cprior.py:23: in
cprior = npct.load_library("cprior.dll", libabspath)
......\AppData\Local\Programs\Python\Python37-32\lib\site-packages\numpy\ctypeslib.py:152: in load_library
return ctypes.cdll[libpath]
......\AppData\Local\Programs\Python\Python37-32\lib\ctypes\ init.py:431: in getitem
return getattr(self, name)
......\AppData\Local\Programs\Python\Python37-32\lib\ctypes\init.py:426: in getattr__
dll = self._dlltype(name)
......\AppData\Local\Programs\Python\Python37-32\lib\ctypes\init.py:356: in init__
self._handle = _dlopen(self._name, mode)
E OSError: [WinError 193] %1 is not a valid Win32 application
ERROR collecting tests/test_ci.py __
tests\test_ci.py:11: in
from cprior.cdist.ci import ci_interval
cprior\cdist__init.py:1: in
from .beta import BetaABTest
cprior\cdist\beta.py:17: in
from .._lib.cprior import beta_cprior
cprior_lib\cprior.py:23: in
cprior = npct.load_library("cprior.dll", libabspath)
......\AppData\Local\Programs\Python\Python37-32\lib\site-packages\numpy\ctypeslib.py:152: in load_library
return ctypes.cdll[libpath]
......\AppData\Local\Programs\Python\Python37-32\lib\ctypes__init.py:431: in getitem
return getattr(self, name)
......\AppData\Local\Programs\Python\Python37-32\lib\ctypes__init.py:426: in getattr
dll = self._dlltype(name)
......\AppData\Local\Programs\Python\Python37-32\lib\ctypes__init.py:356: in init__
self._handle = _dlopen(self._name, mode)
E OSError: [WinError 193] %1 is not a valid Win32 application
____ ERROR collecting tests/test_experiment.py __
tests\test_experiment.py:13: in
from cprior.experiment import Experiment
cprior\experiment__init.py:1: in
from .base import Experiment
cprior\experiment\base.py:16: in
from ..cdist.base import BayesMVTest
cprior\cdist__init.py:1: in
from .beta import BetaABTest
cprior\cdist\beta.py:17: in
from .._lib.cprior import beta_cprior
cprior_lib\cprior.py:23: in
cprior = npct.load_library("cprior.dll", libabspath)
......\AppData\Local\Programs\Python\Python37-32\lib\site-packages\numpy\ctypeslib.py:152: in load_library
return ctypes.cdll[libpath]
......\AppData\Local\Programs\Python\Python37-32\lib\ctypes__init.py:431: in getitem
return getattr(self, name)
......\AppData\Local\Programs\Python\Python37-32\lib\ctypes__init.py:426: in getattr
dll = self._dlltype(name)
......\AppData\Local\Programs\Python\Python37-32\lib\ctypes__init.py:356: in init
self._handle = _dlopen(self._name, mode)
E OSError: [WinError 193] %1 is not a valid Win32 application
___ ERROR collecting tests/test_exponential.py __
tests\test_exponential.py:12: in
from cprior.models import ExponentialABTest
cprior\models__init.py:1: in
from .bernoulli import BernoulliABTest
cprior\models\bernoulli.py:10: in
from ..cdist import BetaABTest
cprior\cdist__init.py:1: in
from .beta import BetaABTest
cprior\cdist\beta.py:17: in
from .._lib.cprior import beta_cprior
cprior_lib\cprior.py:23: in
cprior = npct.load_library("cprior.dll", libabspath)
......\AppData\Local\Programs\Python\Python37-32\lib\site-packages\numpy\ctypeslib.py:152: in load_library
return ctypes.cdll[libpath]
......\AppData\Local\Programs\Python\Python37-32\lib\ctypes__init.py:431: in getitem
return getattr(self, name)
......\AppData\Local\Programs\Python\Python37-32\lib\ctypes__init.py:426: in getattr
dll = self._dlltype(name)
......\AppData\Local\Programs\Python\Python37-32\lib\ctypes__init.py:356: in init__
self._handle = _dlopen(self._name, mode)
E OSError: [WinError 193] %1 is not a valid Win32 application
____ ERROR collecting tests/testgamma.py ____
tests\test_gamma.py:10: in
from cprior.cdist import GammaABTest
cprior\cdist__init.py:1: in
from .beta import BetaABTest
cprior\cdist\beta.py:17: in
from .._lib.cprior import beta_cprior
cprior_lib\cprior.py:23: in
cprior = npct.load_library("cprior.dll", libabspath)
......\AppData\Local\Programs\Python\Python37-32\lib\site-packages\numpy\ctypeslib.py:152: in load_library
return ctypes.cdll[libpath]
......\AppData\Local\Programs\Python\Python37-32\lib\ctypes__init.py:431: in getitem
return getattr(self, name)
......\AppData\Local\Programs\Python\Python37-32\lib\ctypes__init.py:426: in getattr
dll = self._dlltype(name)
......\AppData\Local\Programs\Python\Python37-32\lib\ctypes__init.py:356: in init__
self._handle = _dlopen(self._name, mode)
E OSError: [WinError 193] %1 is not a valid Win32 application
____ ERROR collecting tests/test_geometric.py _
tests\test_geometric.py:12: in
from cprior.models import BernoulliModel
cprior\models__init.py:1: in
from .bernoulli import BernoulliABTest
cprior\models\bernoulli.py:10: in
from ..cdist import BetaABTest
cprior\cdist__init.py:1: in
from .beta import BetaABTest
cprior\cdist\beta.py:17: in
from .._lib.cprior import beta_cprior
cprior_lib\cprior.py:23: in
cprior = npct.load_library("cprior.dll", libabspath)
......\AppData\Local\Programs\Python\Python37-32\lib\site-packages\numpy\ctypeslib.py:152: in load_library
return ctypes.cdll[libpath]
......\AppData\Local\Programs\Python\Python37-32\lib\ctypes\ init.py:431: in getitem
return getattr(self, name)
......\AppData\Local\Programs\Python\Python37-32\lib\ctypes\init.py:426: in getattr__
dll = self._dlltype(name)
......\AppData\Local\Programs\Python\Python37-32\lib\ctypes\ init.py:356: in init__
self._handle = _dlopen(self._name, mode)
E OSError: [WinError 193] %1 is not a valid Win32 application
ERROR collecting tests/test_lognormal.py _
tests\test_lognormal.py:12: in
from cprior.models import LogNormalABTest
cprior\models__init.py:1: in
from .bernoulli import BernoulliABTest
cprior\models\bernoulli.py:10: in
from ..cdist import BetaABTest
cprior\cdist\ init__.py:1: in
from .beta import BetaABTest
cprior\cdist\beta.py:17: in
from .._lib.cprior import beta_cprior
cprior_lib\cprior.py:23: in
cprior = npct.load_library("cprior.dll", libabspath)
......\AppData\Local\Programs\Python\Python37-32\lib\site-packages\numpy\ctypeslib.py:152: in load_library
return ctypes.cdll[libpath]
......\AppData\Local\Programs\Python\Python37-32\lib\ctypes\ init.py:431: in getitem
return getattr(self, name)
......\AppData\Local\Programs\Python\Python37-32\lib\ctypes\init.py:426: in getattr__
dll = self._dlltype(name)
......\AppData\Local\Programs\Python\Python37-32\lib\ctypes\init.py:356: in init__
self._handle = _dlopen(self._name, mode)
E OSError: [WinError 193] %1 is not a valid Win32 application
ERROR collecting tests/test_negative_binomial.py _
tests\test_negative_binomial.py:12: in
from cprior.models import BinomialModel
cprior\models__init.py:1: in
from .bernoulli import BernoulliABTest
cprior\models\bernoulli.py:10: in
from ..cdist import BetaABTest
cprior\cdist__init.py:1: in
from .beta import BetaABTest
cprior\cdist\beta.py:17: in
from .._lib.cprior import beta_cprior
cprior_lib\cprior.py:23: in
cprior = npct.load_library("cprior.dll", libabspath)
......\AppData\Local\Programs\Python\Python37-32\lib\site-packages\numpy\ctypeslib.py:152: in load_library
return ctypes.cdll[libpath]
......\AppData\Local\Programs\Python\Python37-32\lib\ctypes__init.py:431: in getitem
return getattr(self, name)
......\AppData\Local\Programs\Python\Python37-32\lib\ctypes__init.py:426: in getattr__
dll = self._dlltype(name)
......\AppData\Local\Programs\Python\Python37-32\lib\ctypes__init.py:356: in init__
self._handle = _dlopen(self._name, mode)
E OSError: [WinError 193] %1 is not a valid Win32 application
ERROR collecting tests/test_normal.py ____
tests\test_normal.py:12: in
from cprior.models import LogNormalModel
cprior\models__init.py:1: in
from .bernoulli import BernoulliABTest
cprior\models\bernoulli.py:10: in
from ..cdist import BetaABTest
cprior\cdist__init.py:1: in
from .beta import BetaABTest
cprior\cdist\beta.py:17: in
from .._lib.cprior import beta_cprior
cprior_lib\cprior.py:23: in
cprior = npct.load_library("cprior.dll", libabspath)
......\AppData\Local\Programs\Python\Python37-32\lib\site-packages\numpy\ctypeslib.py:152: in load_library
return ctypes.cdll[libpath]
......\AppData\Local\Programs\Python\Python37-32\lib\ctypes__init.py:431: in getitem
return getattr(self, name)
......\AppData\Local\Programs\Python\Python37-32\lib\ctypes__init.py:426: in getattr
dll = self._dlltype(name)
......\AppData\Local\Programs\Python\Python37-32\lib\ctypes__init.py:356: in init
self._handle = _dlopen(self._name, mode)
E OSError: [WinError 193] %1 is not a valid Win32 application
___ ERROR collecting tests/test_normal_inversegamma.py ____
tests\test_normal_inverse_gamma.py:12: in
from cprior.cdist import NormalInverseGammaABTest
cprior\cdist__init.py:1: in
from .beta import BetaABTest
cprior\cdist\beta.py:17: in
from .._lib.cprior import beta_cprior
cprior_lib\cprior.py:23: in
cprior = npct.load_library("cprior.dll", libabspath)
......\AppData\Local\Programs\Python\Python37-32\lib\site-packages\numpy\ctypeslib.py:152: in load_library
return ctypes.cdll[libpath]
......\AppData\Local\Programs\Python\Python37-32\lib\ctypes__init.py:431: in getitem
return getattr(self, name)
......\AppData\Local\Programs\Python\Python37-32\lib\ctypes__init.py:426: in getattr
dll = self._dlltype(name)
......\AppData\Local\Programs\Python\Python37-32\lib\ctypes__init.py:356: in init__
self._handle = _dlopen(self._name, mode)
E OSError: [WinError 193] %1 is not a valid Win32 application
__ ERROR collecting tests/test_pareto.py ____
tests\test_pareto.py:10: in
from cprior.cdist import ParetoABTest
cprior\cdist__init.py:1: in
from .beta import BetaABTest
cprior\cdist\beta.py:17: in
from .._lib.cprior import beta_cprior
cprior_lib\cprior.py:23: in
cprior = npct.load_library("cprior.dll", libabspath)
......\AppData\Local\Programs\Python\Python37-32\lib\site-packages\numpy\ctypeslib.py:152: in load_library
return ctypes.cdll[libpath]
......\AppData\Local\Programs\Python\Python37-32\lib\ctypes__init.py:431: in getitem
return getattr(self, name)
......\AppData\Local\Programs\Python\Python37-32\lib\ctypes__init.py:426: in getattr
dll = self._dlltype(name)
......\AppData\Local\Programs\Python\Python37-32\lib\ctypes__init.py:356: in init
self._handle = _dlopen(self.name, mode)
E OSError: [WinError 193] %1 is not a valid Win32 application
____ ERROR collecting tests/test_poisson.py __
tests\test_poisson.py:12: in
from cprior.models import ExponentialModel
cprior\models__init.py:1: in
from .bernoulli import BernoulliABTest
cprior\models\bernoulli.py:10: in
from ..cdist import BetaABTest
cprior\cdist__init.py:1: in
from .beta import BetaABTest
cprior\cdist\beta.py:17: in
from .._lib.cprior import beta_cprior
cprior_lib\cprior.py:23: in
cprior = npct.load_library("cprior.dll", libabspath)
......\AppData\Local\Programs\Python\Python37-32\lib\site-packages\numpy\ctypeslib.py:152: in load_library
return ctypes.cdll[libpath]
......\AppData\Local\Programs\Python\Python37-32\lib\ctypes__init.py:431: in getitem
return getattr(self, name)
......\AppData\Local\Programs\Python\Python37-32\lib\ctypes__init.py:426: in getattr
dll = self._dlltype(name)
......\AppData\Local\Programs\Python\Python37-32\lib\ctypes__init.py:356: in init
self._handle = _dlopen(self.name, mode)
E OSError: [WinError 193] %1 is not a valid Win32 application
____ ERROR collecting tests/test_uniform.py ____
tests\test_uniform.py:12: in
from cprior.models import UniformABTest
cprior\models__init.py:1: in
from .bernoulli import BernoulliABTest
cprior\models\bernoulli.py:10: in
from ..cdist import BetaABTest
cprior\cdist__init.py:1: in
from .beta import BetaABTest
cprior\cdist\beta.py:17: in
from .._lib.cprior import beta_cprior
cprior_lib\cprior.py:23: in
cprior = npct.load_library("cprior.dll", libabspath)
......\AppData\Local\Programs\Python\Python37-32\lib\site-packages\numpy\ctypeslib.py:152: in load_library
return ctypes.cdll[libpath]
......\AppData\Local\Programs\Python\Python37-32\lib\ctypes\ init.py:431: in getitem
return getattr(self, name)
......\AppData\Local\Programs\Python\Python37-32\lib\ctypes\init.py:426: in getattr__
dll = self._dlltype(name)
......\AppData\Local\Programs\Python\Python37-32\lib\ctypes\ init.py:356: in init__
self._handle = _dlopen(self._name, mode)
E OSError: [WinError 193] %1 is not a valid Win32 application
=============================================== short test summary info ===============================================
ERROR tests/test_bernoulli.py - OSError: [WinError 193] %1 is not a valid Win32 application
ERROR tests/test_beta.py - OSError: [WinError 193] %1 is not a valid Win32 application
ERROR tests/test_binomial.py - OSError: [WinError 193] %1 is not a valid Win32 application
ERROR tests/test_ci.py - OSError: [WinError 193] %1 is not a valid Win32 application
ERROR tests/test_experiment.py - OSError: [WinError 193] %1 is not a valid Win32 application
ERROR tests/test_exponential.py - OSError: [WinError 193] %1 is not a valid Win32 application
ERROR tests/test_gamma.py - OSError: [WinError 193] %1 is not a valid Win32 application
ERROR tests/test_geometric.py - OSError: [WinError 193] %1 is not a valid Win32 application
ERROR tests/test_lognormal.py - OSError: [WinError 193] %1 is not a valid Win32 application
ERROR tests/test_negative_binomial.py - OSError: [WinError 193] %1 is not a valid Win32 application
ERROR tests/test_normal.py - OSError: [WinError 193] %1 is not a valid Win32 application
ERROR tests/test_normal_inverse_gamma.py - OSError: [WinError 193] %1 is not a valid Win32 application
ERROR tests/test_pareto.py - OSError: [WinError 193] %1 is not a valid Win32 application
ERROR tests/test_poisson.py - OSError: [WinError 193] %1 is not a valid Win32 application
ERROR tests/test_uniform.py - OSError: [WinError 193] %1 is not a valid Win32 application
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Interrupted: 15 errors during collection !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
================================================= 15 errors in 4.66s ==================================================