search

guino / BazzDoorbell

128 stars 22 forks source link

Changing WiFi #43

Closed Nigel1992 closed 3 years ago

Nigel1992 commented 3 years ago

If I reset the camera to change WiFi, do I need to reflash? If yes, is there a way to change WiFi settings inside some file on the device ?

guino commented 3 years ago

You can probably change/set the wifi ID+password in ppsFactoryTool.txt and just leave it at that.

If you reset the device you do NOT need to re-apply the hack, you should be able to do this: -Boot without SD card -Reset device to factory settings -Configure device (so it uses the WIFI+settings you want) -Boot with SD card (it should boot with the hack here)

If you have a ppsFactoryTool.txt in the SD card you will need to adjust the WIFI ID + Password in it too or it will connect to whatever was left in the file before you reset the device.

Nigel1992 commented 3 years ago

Its working after following the steps: If you reset the device you do NOT need to re-apply the hack, you should be able to do this: -Boot without SD card -Reset device to factory settings -Configure device (so it uses the WIFI+settings you want) -Boot with SD card (it should boot with the hack here)

BUT certain things required fixing as they got reset.

  1. RTSP /home/cfg/tuya_config.json https://github.com/guino/BazzDoorbell/issues/2#issuecomment-745618597

  2. SSH https://github.com/guino/BazzDoorbell/issues/39#issuecomment-880823558

Easiest method is change/set the wifi ID+password in ppsFactoryTool.txt :)