search

guino / LSCOutdoor1080P

Root customization of the LSC Outdoor 1080P camera and LSC Rotating 1080P cameras
30 stars 7 forks source link

Night LED activation #23

Open OrianaDavinci opened 2 months ago

OrianaDavinci commented 2 months ago

Hi, I managed with option 3 to put the firmware and use the camera in RTSP + PTZ.

activating LEDs for night vision does not work. is this normal?

The camera is in offline mode + blocked on my firewall.

Quick question, is the onvif protocol supported?

guino commented 1 month ago

Onvif is not included in these devices, but you could 'add' the onvif layer with an outside process (i.e. on a separate computer) -- I have seen a few projects for this but never really tried any of them.

The night vision LEDs work fine on my device. That said, different hardware/firmware versions could make the version from option 3 not be 100% compatible with it. Try the night vision with the default firmware (without SD card) to see if it works normally -- if not, you could just have faulty hardware. If it works with default firmware but not with 2.10.36 then it could be a compatibility issue with the version from Option 3.