search

guino / Merkury1080P

Merkury1080P (CW017) Rooting and Customization
83 stars 17 forks source link

ppsapp patch request #27

Open kevinwillemarck opened 2 years ago

kevinwillemarck commented 2 years ago

Hello

I don't know if its possible to get a v5.0 firmware patched. Asking for any help that could point me in the right direction or can offer a patched version.

{ "devname":"Smart Home Camera", "model":"Bullet 4S", "serialno":"100202591", "softwareversion":"5.0.5", "hardwareversion":"B4S_V10_S1_GC1", "firmwareversion":"ppstrong-c71-tuya2_lsc-5.0.5.20210301", "identity":"M16003AA3B02007118", "authkey":"uFkvjT134tFxXP10yodJNb1yzPSS9XlP", "deviceid":"pp011dce3f6f7f617add", "pid":"aaa", "WiFi MAC":"b4:fb:e3:e0:7b:1a", "ETH MAC":"b4:fb:e3:e0:7b:1a" }

guino commented 2 years ago

@KevinWillemarck sorry we have no patch for 5.0.5 as of writing this. At least some of these devices don't seem to even run linux.

kevinwillemarck commented 2 years ago

@guino That's a bummer. But if I remember correct I read somewhere that with firmware v5.x onvif and rtsp could be enabled or is enabled. Is this correct or did I understand it wrongly? Or is this something that can only be accomplished with rooting the firmware?

guino commented 2 years ago

@KevinWillemarck if you have a hardware programmer, heat gun and enough skill to handle them you may be able to change the settings in the firmware like posted on this issue: https://github.com/guino/BazzDoorbell/issues/62#issuecomment-1091869295 but we have no solution to rooting it without hardware work and there’s no way to access the settings other than rooting or hardware programmer.