Closed demorphica closed 5 years ago
1) Is it all wireless client or only single unit? If Single Client check client for driver updates, forget wsaved wireless network and start over.
2) Did you overclock your hardware if so it might be too much, dial down on the overclock
3) (Most likely) Could be your Wireless Config file out of date or wrong settings? If so delete the wireless config file and start over SSH in and do
rm /etc/config/wireless
reboot
4) (Last Resort) Could it be ART partition issue? If so try to flash another art partition but remember to backup beforehand.
Thank you very much for responding
This issue was happening for all clients
I tried to remove my /etc/config/wireless
but that did not help
I was able to clear old files as follows & it worked
umount /overlay && firstboot && reboot
both radios are stable now & i'm getting the benefits of your image
Thanks a lot for the pointers
Hi, thank you very much for doing this work I am using this on Archer C7v2 & was using your older image that got deprecated. I faced issues with wireless stability on the older image, both 5Ghz and 2Ghz networks would become disabled after some time After upgrading to the new image i still see the same problem, i think it got worse since 5GHz stays disabled and 2GHz drops connections after just a few seconds
Kernel log
System Log