search

gyptazy / vagrant-arm64-boxes

Collection of Vagrant Boxes for ARM64 (Apple Silicon support)
https://gyptazy.ch/blog/collection-of-vagrant-boxes-images-for-apple-silicon-based-on-arm64/
5 stars 0 forks source link

[rocky9.3-arm64] fails at Warning: Authentication failure. Retrying... #6

Closed wojciechpolak closed 10 months ago

wojciechpolak commented 10 months ago

I'm trying the latest gyptazy/rocky9.3-arm64 v1.0.0:

System:

MBP:vagrant$ vagrant init gyptazy/rocky9.3-arm64 --box-version 1.0.0
A `Vagrantfile` has been placed in this directory. You are now
ready to `vagrant up` your first virtual environment! Please read
the comments in the Vagrantfile as well as documentation on
`vagrantup.com` for more information on using Vagrant.

Then I made a simple modification in Vagrantfile by adding:

  config.vm.provider "vmware_desktop" do |v|
    v.gui = false
    v.vmx["memsize"] = "1024"
    v.vmx["numvcpus"] = "2"
  end

And I invoked vagrant up:

MBP:vagrant$ vagrant up
Bringing machine 'default' up with 'vmware_desktop' provider...
==> default: Box 'gyptazy/rocky9.3-arm64' could not be found. Attempting to find and install...
    default: Box Provider: vmware_desktop, vmware_fusion, vmware_workstation
    default: Box Version: 1.0.0
==> default: Loading metadata for box 'gyptazy/rocky9.3-arm64'
    default: URL: https://vagrantcloud.com/api/v2/vagrant/gyptazy/rocky9.3-arm64
==> default: Adding box 'gyptazy/rocky9.3-arm64' (v1.0.0) for provider: vmware_fusion (arm64)
    default: Downloading: https://vagrantcloud.com/gyptazy/boxes/rocky9.3-arm64/versions/1.0.0/providers/vmware_fusion/arm64/vagrant.box
    default: Calculating and comparing box checksum...
==> default: Successfully added box 'gyptazy/rocky9.3-arm64' (v1.0.0) for 'vmware_fusion (arm64)'!
==> default: Cloning VMware VM: 'gyptazy/rocky9.3-arm64'. This can take some time...
==> default: Checking if box 'gyptazy/rocky9.3-arm64' version '1.0.0' is up to date...
==> default: Verifying vmnet devices are healthy...
==> default: Preparing network adapters...
WARNING: The VMX file for this box contains a setting that is automatically overwritten by Vagrant
WARNING: when started. Vagrant will stop overwriting this setting in an upcoming release which may
WARNING: prevent proper networking setup. Below is the detected VMX setting:
WARNING: 
WARNING:   ethernet0.pcislotnumber = "160"
WARNING: 
WARNING: If networking fails to properly configure, it may require this VMX setting. It can be manually
WARNING: applied via the Vagrantfile:
WARNING: 
WARNING:   Vagrant.configure(2) do |config|
WARNING:     config.vm.provider :vmware_desktop do |vmware|
WARNING:       vmware.vmx["ethernet0.pcislotnumber"] = "160"
WARNING:     end
WARNING:   end
WARNING: 
WARNING: For more information: https://www.vagrantup.com/docs/vmware/boxes.html#vmx-allowlisting
==> default: Starting the VMware VM...
==> default: Waiting for the VM to receive an address...
==> default: Forwarding ports...
    default: -- 22 => 2222
==> default: Waiting for machine to boot. This may take a few minutes...
    default: SSH address: 127.0.0.1:2222
    default: SSH username: vagrant
    default: SSH auth method: private key
    default: Warning: Authentication failure. Retrying...
    default: Warning: Authentication failure. Retrying...
    default: Warning: Authentication failure. Retrying...
    default: Warning: Authentication failure. Retrying...
    default: Warning: Authentication failure. Retrying...
    default: Warning: Authentication failure. Retrying...
    default: Warning: Authentication failure. Retrying...
    default: Warning: Authentication failure. Retrying...
    default: Warning: Authentication failure. Retrying...
    default: Warning: Authentication failure. Retrying...
^C==> default: Waiting for cleanup before exiting...
Vagrant exited after cleanup due to external interrupt.

^C means 'Control-C' to interrupt it. Another attempt:

MBP:vagrant$ vagrant up
Bringing machine 'default' up with 'vmware_desktop' provider...
==> default: Checking if box 'gyptazy/rocky9.3-arm64' version '1.0.0' is up to date...
==> default: Machine is already running.
MBP:vagrant$ 
MBP:vagrant$ vagrant ssh
vagrant@127.0.0.1: Permission denied (publickey,gssapi-keyex,gssapi-with-mic,password).
MBP:vagrant$ 
MBP:vagrant$ vagrant status
Current machine states:

default                   running (vmware_desktop)

The VM is running. To stop this VM, you can run `vagrant halt` to
shut it down, or you can run `vagrant suspend` to simply suspend
the virtual machine. In either case, to restart it again, run
`vagrant up`.
gyptazy commented 10 months ago

Hey @wojciechpolak,

thanks for reporting and sorry for that - I should have tested it before releasing. Unfortunately, there was a bug in my post-install script including an infinity loop for the vagrant users configuration...

1.0.2 has been released and should now be fully working:

$> vagrant init gyptazy/rocky9.3-arm64 ; vagrant up ; vagrant ssh
A `Vagrantfile` has been placed in this directory. You are now
ready to `vagrant up` your first virtual environment! Please read
the comments in the Vagrantfile as well as documentation on
`vagrantup.com` for more information on using Vagrant.
Bringing machine 'default' up with 'vmware_desktop' provider...
==> default: Box 'gyptazy/rocky9.3-arm64' could not be found. Attempting to find and install...
    default: Box Provider: vmware_desktop, vmware_fusion, vmware_workstation
    default: Box Version: >= 0
==> default: Loading metadata for box 'gyptazy/rocky9.3-arm64'
    default: URL: https://vagrantcloud.com/gyptazy/rocky9.3-arm64
==> default: Adding box 'gyptazy/rocky9.3-arm64' (v1.0.2) for provider: vmware_fusion
    default: Downloading: https://vagrantcloud.com/gyptazy/boxes/rocky9.3-arm64/versions/1.0.2/providers/vmware_fusion/arm64/vagrant.box
    default: Calculating and comparing box checksum...
==> default: Successfully added box 'gyptazy/rocky9.3-arm64' (v1.0.2) for 'vmware_fusion'!
==> default: Cloning VMware VM: 'gyptazy/rocky9.3-arm64'. This can take some time...
==> default: Checking if box 'gyptazy/rocky9.3-arm64' version '1.0.2' is up to date...
==> default: Verifying vmnet devices are healthy...
==> default: Preparing network adapters...
WARNING: The VMX file for this box contains a setting that is automatically overwritten by Vagrant
WARNING: when started. Vagrant will stop overwriting this setting in an upcoming release which may
WARNING: prevent proper networking setup. Below is the detected VMX setting:
WARNING: 
WARNING:   ethernet0.pcislotnumber = "160"
WARNING: 
WARNING: If networking fails to properly configure, it may require this VMX setting. It can be manually
WARNING: applied via the Vagrantfile:
WARNING: 
WARNING:   Vagrant.configure(2) do |config|
WARNING:     config.vm.provider :vmware_desktop do |vmware|
WARNING:       vmware.vmx["ethernet0.pcislotnumber"] = "160"
WARNING:     end
WARNING:   end
WARNING: 
WARNING: For more information: https://www.vagrantup.com/docs/vmware/boxes.html#vmx-allowlisting
==> default: Starting the VMware VM...
==> default: Waiting for the VM to receive an address...
==> default: Forwarding ports...
    default: -- 22 => 2222
==> default: Waiting for machine to boot. This may take a few minutes...
    default: SSH address: 127.0.0.1:2222
    default: SSH username: vagrant
    default: SSH auth method: private key
    default: 
    default: Vagrant insecure key detected. Vagrant will automatically replace
    default: this with a newly generated keypair for better security.
    default: 
    default: Inserting generated public key within guest...
    default: Removing insecure key from the guest if it's present...
    default: Key inserted! Disconnecting and reconnecting using new SSH key...
==> default: Machine booted and ready!
==> default: Configuring network adapters within the VM...
==> default: Waiting for HGFS to become available...
==> default: Enabling and configuring shared folders...
    default: -- /Users/gyptazy/vms: /vagrant
                    _                  
   __ _ _   _ _ __ | |_ __ _ _____   _ 
  / _` | | | | '_ \| __/ _` |_  / | | |
 | (_| | |_| | |_) | || (_| |/ /| |_| |
  \__, |\__, | .__/ \__\__,_/___|\__, |
  |___/ |___/|_|                 |___/ 

    Creator:    gyptazy
    X/Twitter:  gyptazy
    Fediverse:  gyptazy [A/T] gyptazy.ch
    Email:      gyptazy [A/T] gyptazy.ch (GPG: 0x69BF7050)

    Bug Tracker:    https://github.com/gyptazy/vagrant-arm64-boxes
    Web/Info:   https://gyptazy.ch/blog/collection-of-vagrant-boxes-images-for-apple-silicon-based-on-arm64/

Last login: Sun Jan 28 12:55:57 2024
[vagrant@rocky01-gyp01 ~]$ sudo uptime
 12:45:11 up 8 min,  1 user,  load average: 0.06, 0.08, 0.04

Please give it a try and let me know if everything finally works.

Thanks, gyptazy

wojciechpolak commented 10 months ago

Now it's working fine (v1.0.2). Thanks a lot, I appreciate your effort!

gyptazy commented 10 months ago

Now it's working fine (v1.0.2). Thanks a lot, I appreciate your effort!

Thanks for confirming! Have a nice weekend :)