Wi-Fi Settings not Saved

gysmo38 / mitsubishi2MQTT

Mitsubishi to MQTT with ESP8266 module

GNU Lesser General Public License v2.1

371 stars 133 forks source link

Wi-Fi Settings not Saved #168

Closed BreBar07 closed 1 year ago

BreBar07 commented 2 years ago

Hello All,

I am using Wemo D1 Mini Pro, after flashing I get following error;

mitsubishi2MQTT-master: no headers files (.h) found in ... Assume this is ok?

After flashing I get to initial config screen, enter SSID / PSK and reboot. Then after reboot it just defaults back to Initial config state.

Any thoughts? Help?

BreBar07 commented 2 years ago

I manually changed sketch to include SSID / PSK and initially that worked. However after power down config for Wi-Fi / MQTT was lost.

JAAS76 commented 2 years ago

I had this too on two Wemos d1s, I lowered the d1 mini upload speed and it worked for me.

Dreamswielder commented 2 years ago

Any other way to solve this, or to check what is happening? I loop on the wifi settings and, or never conects, or never saves... I have tried all upload speeds...

BreBar07 commented 2 years ago

After I manually changed the sketch and flashed the chips it has worked perfectly.

Flashed Initial SSID and PSK, and I have recently rebuilt my network and updated to new SSID and PSK and they are working flawlessly.

Dreamswielder commented 2 years ago

What did you change in the sketch? Im using Arduino to upload... just in case you are using other program...

gysmo38 commented 1 year ago

Tested with last version, no issue. Please try again.