[SETUP] configuration + Climate entity

[felisida]

Describe the problem I'm attaching the names of my components in By-me and the db names.pdf DB_Domotica Vimar 200507.db.zip

Check for some things first unfortunately I'm not a code expert

Setup

• Environment: macos
• Home-Assistant Version: [v0.110.5]

[h4de5]

just for an update - I tried to add proper support for the individual modes (on, off, auto, manual) in regards of our two different climate device types. I too added support for fancoil settings in the climate module.

[felisida]

I'm sorry but my system don't have fan-coil, mine is a floor heating with heat pump

[h4de5]

@felisida : I now tried to add external heating sources as well. Can you send me a screenshot of how this looks like on your home-assistant screen (just small screenshot for the docs).

[felisida]

this one?

[h4de5]

yes. I hoped the heat pump option would show up as an extra button. what comes up if you select the 3 dots on top?

[felisida]

I can't reach to sent you a screenshot

[felisida]

when i select the 3 dots the heat pump at the moment is out of my domotic system,

[h4de5]

ah ok. but at least the button is there :D as far as I can see, this ticket can also be considered done, leaving only alarm and audio integration for the next goals.

again - if you see anything wrong, just reopen the issue and we will get it done.

I tried some things with the media player yesterday but may need some more time on that, because I can't test it properly. therefore I think I will first fix some issues on the home-assistant part and maybe add HACS support first.

[felisida]

hi handy I think there is a little bug in the climate project, this morning I tried to start the heating system, and all' work properly but I think there is a little issue In the translate because the correct description is "Riscaldamento" e non "Raffreddamento"

[felisida]

too in this condition the command was send properly but the correct label is "Raffreddamento"

[h4de5]

@felisida the translation comes directly from the home-assistant project. I only change the states. I recently changed around some of the states, just to find out, that there seems to exist at least 3 different climate devices from vimar (see converstation in home-assistant forum). maybe the states are still not right. I uploaded a new debug version for cliemates - if you set one thermostat to heating, one to cooling and one off, you should be able to see the startup states for each thermostate in the home-assistant log file.

If you say, that your vimar thermostate indeed changes to the requested states - (switches to cooling if pressed on cooling etc.) only than it must really a translation error - but that is very unlikely as it would affect all italian hass installations.

[felisida]

it's strange! all work properly only the label is incorrect, but this doesn't affect the operation

[felisida]

I UPDATET THE last repository, but the pairing is still incorrect

[h4de5]

just checked the global language settings - as far as I can see, the translation seems fine: https://github.com/home-assistant/frontend/blob/da0658f3d99109170137251e34b03bf21a6af478/translations/frontend/it.json#L34

very strange :\ can you try to set the target temperatur above your current temperature to see if it says "Riscaldamento"?

[felisida]

the translation is correct, but the association in HA the behavior is reverse another fact, in cooling state if I make change in HA the label is always "inattivo" like as can't reach to read the state from web server, but only this one, on the contrary when I made change directly from web server I had with you see in the screenshot

[h4de5]

@felisida please allow some time between changing the states in HA and getting the actual state from the webserver. it is possible, that you switch to cooling, in one cycle, and need to wait two more cycles (around 8 seconds each) until HASS has updated its setting in the frontend. i will have a look again later today - maybe I find another issue. the problem again, I am afraid I can only take guesses whats wrong.

the states has been changed due to a bug report from the community - https://community.home-assistant.io/t/vimar-integration-wip/202073/27

[felisida]

hello i imagined time problems but i waited at least 1 minute and also did a page refresh to force but the status does not change

[h4de5]

@felisida I think I fixed the problem with the translation now.

[felisida]

Perfect work fine!!!

[h4de5]

@felisida can I close this one? or is there still something to fix here?

[felisida]

yes you can close I wrote in my last post . thanks