search

h9-dev / chia-miner

The miner for Chia.
https://www.h9.com
225 stars 40 forks source link

[BUG] DiskProver exception : badbit or failbit after reading size 104 at position 0 - Raspberry PI Ubuntu #696

Closed mrcsXndr closed 10 months ago

mrcsXndr commented 3 years ago

I'm going crazy.

I have 6x Seagate 5TB that work fine, then I have 5x WD Elements. On my 12 TB drive everything is fine, but on the larger drives, 162 plots give the same result (On my Ubuntu 21.04 32bit Raspberry Pi) DiskProver exception : badbit or failbit after reading size 104 at position 0 badbit or failbit after reading size 104 at position 0ERRO[2021-08-11T11:49:42+02:00] add plot file error="badbit or failbit after reading size 104 at position 0" f7="{loggers.go,logging.CPrint,156}" f8="{plotterSpace.go,chia.(*PlotterSpace).Load,259}" f9="{asm_arm.s,runtime.goexit,841}"

THIS ERROR DOES NOT HAPPEN IF I USE THE WINDOWS CLI OR GUI!

7 drives load fine and these plots ALL just fail. They are valid in both Chia and HPool for Windows.

I have moved them from drive to drive to test if that was the issue, I have closed and opened GUI and CLI in different orders, and all the while, they work perfectly fine BOTH in Chia validator, they are all valid and good, and they also work in BOTH hpool GUI and CLI on Windows, but NOT on my RPi!

I'm at a loss.. My Elements are all NTFS and the 12 TB (which is also RAID 2x 6tb) works fine, but the 18tb or 16tb don't seem to work.

I get the exact same error on these plots but again... only on RPI; I have validated them up and down, the drive is chkdisked, files are tested.... I AM GOING CRAZY! I don't want to replot 162 plots.

OS: Ubuntu 21.04 + Windows 10 64bit

mrcsXndr commented 3 years ago

After moving half of the plots to a smaller WD Elements drive: THEY DO LOAD NOW, but it makes no fucking sense... I'm gonna try formatting the other drives to exFAT or something instead, see if that helps.. STILL NO FIX

MABI13 commented 3 years ago

Yes this is a random problem it seems. When it first happened to me i simply copied the plots to another drive. Now today when i added an old drive that i moved with plots that already been on Hpool the same thing happened to the whole drive all plots are invalid even thought i already used them on Hpool for 3 months.