manufactory -> set uni mac addr:xx:xx:xx:xx:xx replacing the mac
during the tests, I switched the stick to bridge. now there is no access to telnet.
I understand that access can be returned via UART?
the command before the loss of telnet.
Hal# set rstp
bridge set rstp bridge
port set rstp port
Hal# set rstp bridge
enable enable
disable disable
priority set rstp bridge priority
maxage set rstp bridge maxage
hello-time set rstp bridge hello time
forward set rstp bridge forward delay
hold-time set rstp bridge hold time
Hal# set rstp bridge enable
manufactory -> set uni mac addr:xx:xx:xx:xx:xx replacing the mac
during the tests, I switched the stick to bridge. now there is no access to telnet. I understand that access can be returned via UART? the command before the loss of telnet. Hal# set rstp bridge set rstp bridge port set rstp port Hal# set rstp bridge enable enable disable disable priority set rstp bridge priority maxage set rstp bridge maxage hello-time set rstp bridge hello time forward set rstp bridge forward delay hold-time set rstp bridge hold time Hal# set rstp bridge enable