Zawieszający się ESP32

[ookris]

Hej, przeszedłem właśnie na ESP32 i po małych problemach z podłączeniem kabelków mam kolejny. Najnowsze oprogramowanie po wykonaniu pierwszych pomiarów PM po prostu się zawiesza. Restart nic nie daje gdyż ponownie po wykonaniu pierwszych pomiarów PM wszystko staje.

Log z Ardiunio:

09:01:17.824 -> ets Jun 8 2016 00:22:57 09:01:17.824 -> 09:01:17.824 -> rst:0x1 (POWERON_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT) 09:01:17.824 -> configsip: 0, SPIWP:0xee 09:01:17.824 -> clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00 09:01:17.858 -> mode:DIO, clock div:1 09:01:17.858 -> load:0x3fff0018,len:4 09:01:17.858 -> load:0x3fff001c,len:1216 09:01:17.858 -> ho 0 tail 12 room 4 09:01:17.858 -> load:0x40078000,len:9720 09:01:17.858 -> ho 0 tail 12 room 4 09:01:17.858 -> load:0x40080400,len:6352 09:01:17.858 -> entry 0x400806b8 09:01:18.249 -> Mounting FS... 09:01:18.249 -> Loaded DEVICENAME_AUTO: 1 09:01:18.283 -> Loaded DEVICENAME: smogomierz1 09:01:18.283 -> Loaded LANGUAGE: polish 09:01:18.283 -> Loaded SELECTED_LANGUAGE: 2 09:01:18.283 -> Loaded THP_MODEL: BME280 09:01:18.283 -> Loaded DUST_MODEL: PMS7003 09:01:18.283 -> Loaded DISPLAY_PM1: 1 09:01:18.283 -> Loaded FREQUENTMEASUREMENT: 0 09:01:18.283 -> Loaded DUST_TIME: 5 09:01:18.283 -> Loaded NUMBEROFMEASUREMENTS: 10 09:01:18.283 -> Loaded LUFTDATEN_ON: 0 09:01:18.283 -> Loaded SMOGLIST_ON: 0 09:01:18.283 -> Loaded AIRMONITOR_ON: 0 09:01:18.283 -> Loaded AIRMONITOR_GRAPH_ON: 0 09:01:18.283 -> Loaded LATITUDE: 51.261981 09:01:18.316 -> Loaded LONGITUDE: 15.580108 09:01:18.316 -> Loaded MYALTITUDE: 182 09:01:18.316 -> Loaded THINGSPEAK_ON: 0 09:01:18.316 -> Loaded THINGSPEAK_GRAPH_ON: 0 09:01:18.316 -> Loaded THINGSPEAK_API_KEY: API-KEY 09:01:18.316 -> Loaded THINGSPEAK_CHANNEL_ID: 0 09:01:18.316 -> Loaded THINGSPEAK_READ_API_KEY: READ_API_KEY 09:01:18.316 -> Loaded INFLUXDB_ON: 1 09:01:18.316 -> Loaded INFLUXDB_VERSION: 1 09:01:18.316 -> Loaded INFLUXDB_HOST: db.bolecair.info 09:01:18.316 -> Loaded INFLUXDB_PORT: 8086 09:01:18.316 -> Loaded INFLUXDB_DATABASE: xxxxxxxxx 09:01:18.316 -> Loaded INFLUXDB_USER: xxxxxxxx 09:01:18.351 -> Loaded INFLUXDB_PASSWORD: xxxxxxxxx 09:01:18.351 -> Loaded INFLUXDB_ORG: 09:01:18.351 -> Loaded INFLUXDB_BUCKET: 09:01:18.351 -> Loaded INFLUXDB_TOKEN: 09:01:18.351 -> Loaded MQTT_ON: 0 09:01:18.351 -> Loaded MQTT_HOST: MQTT_ADRESS 09:01:18.351 -> Loaded MQTT_PORT: 1883 09:01:18.351 -> Loaded MQTT_USER: username 09:01:18.351 -> Loaded MQTT_PASSWORD: password 09:01:18.351 -> Loaded MQTT_IP_IN_TOPIC: 0 09:01:18.351 -> Loaded MQTT_DEVICENAME_IN_TOPIC: 0 09:01:18.351 -> Loaded MQTT_TOPIC_TEMP: MQTT_TOPIC_TEMP 09:01:18.384 -> Loaded MQTT_TOPIC_HUMI: MQTT_TOPIC_HUMI 09:01:18.384 -> Loaded MQTT_TOPIC_PRESS: MQTT_TOPIC_PRESS 09:01:18.384 -> Loaded MQTT_TOPIC_PM1: MQTT_TOPIC_PM1 09:01:18.384 -> Loaded MQTT_TOPIC_PM25: MQTT_TOPIC_PM25 09:01:18.384 -> Loaded MQTT_TOPIC_PM10: MQTT_TOPIC_PM10 09:01:18.384 -> Loaded MQTT_TOPIC_AIRQUALITY: MQTT_TOPIC_AIRQUALITY 09:01:18.384 -> Loaded AQI_ECO_ON: 0 09:01:18.384 -> Loaded AQI_ECO_HOST: ???.aqi.eco 09:01:18.384 -> Loaded AQI_ECO_PATH: /u/??? 09:01:18.384 -> Loaded SENDING_FREQUENCY: 5 09:01:18.384 -> Loaded SENDING_DB_FREQUENCY: 5 09:01:18.422 -> Loaded DEEPSLEEP_ON: 0 09:01:18.422 -> Loaded DEBUG: 1 09:01:18.422 -> Loaded AUTOUPDATE_ON: 0 09:01:18.422 -> Loaded CONFIG_AUTH: 0 09:01:18.422 -> Loaded CONFIG_USERNAME: admin 09:01:18.422 -> Loaded CONFIG_PASSWORD: password 09:01:18.422 -> Loaded MODEL: white 09:01:18.422 -> Loaded PMSENSORVERSION: PMS 09:01:18.422 -> Loaded SOFTWAREVERSION: 2.7.5 build 17:28:36 Feb 6 2020 09:01:18.422 -> 09:01:18.422 -> 09:01:18.422 -> Config loaded 09:01:18.422 -> Polish Translation! 09:01:18.422 -> 09:01:19.336 -> Device name: Smogly-EC4F5FC 09:01:19.336 -> WM: [1] AutoConnect 09:01:19.408 -> WM: [2] esp_wifi_set_country: US 09:01:19.408 -> WM: [2] ESP32 event handler enabled 09:01:19.408 -> WM: [2] Connecting as wifi client... 09:01:19.408 -> WM: [1] STA static IP: 09:01:19.408 -> WM: [2] setSTAConfig static ip not set 09:01:19.408 -> WM: [3] WIFI station disconnect 09:01:19.408 -> WM: [1] Connecting to SAVED AP: Linksys2.4_1900ACS 09:01:19.408 -> WM: [3] Using Password: xxxxxxxxxxxxxx 09:01:19.408 -> WM: [3] WiFi station enable 09:01:19.443 -> WM: [1] connectTimeout not set, ESP waitForConnectResult... 09:01:20.436 -> WM: [2] Connection result: WL_CONNECTED 09:01:20.436 -> WM: [3] lastconxresult: WL_CONNECTED 09:01:20.436 -> WM: [1] AutoConnect: SUCCESS 09:01:20.436 -> *WM: [1] STA IP Address: 10.0.0.63 09:01:20.436 -> connected...yeey :) 09:01:20.688 -> Waiting for NTP time sync: . 09:01:21.177 -> Current time: Sat Feb 8 08:01:21 2020 09:01:22.118 -> 09:01:22.118 -> SERVER SOFTWARE VERSION: 2.7.5 09:01:22.118 -> CURRENT SOFTWARE VERSION: 2.7.5 09:01:22.118 -> 09:01:22.118 -> You have the current version of the firmware! 09:01:22.118 -> 09:01:22.118 -> HTTPServer ready! http://Smogly-EC4F5FC.local/ 09:06:23.004 -> 09:06:23.004 -> Turning ON PM sensor... 09:06:28.430 -> 09:06:28.430 -> PM measurement number: 0 09:06:28.430 -> Value of PM1: 22 09:06:28.430 -> Value of PM2.5: 35 09:06:28.430 -> Value of PM10: 38 09:06:30.436 -> 09:06:30.436 -> PM measurement number: 1 09:06:30.436 -> Value of PM1: 27 09:06:30.436 -> Value of PM2.5: 43 09:06:30.436 -> Value of PM10: 58 09:06:32.250 -> 09:06:32.250 -> PM measurement number: 2 09:06:32.250 -> Value of PM1: 28 09:06:32.250 -> Value of PM2.5: 44 09:06:32.250 -> Value of PM10: 59 09:06:34.227 -> 09:06:34.227 -> PM measurement number: 3 09:06:34.227 -> Value of PM1: 29 09:06:34.227 -> Value of PM2.5: 46 09:06:34.227 -> Value of PM10: 59 09:06:36.244 -> 09:06:36.244 -> PM measurement number: 4 09:06:36.244 -> Value of PM1: 30 09:06:36.244 -> Value of PM2.5: 47 09:06:36.244 -> Value of PM10: 62 09:06:38.237 -> 09:06:38.237 -> PM measurement number: 5 09:06:38.237 -> Value of PM1: 31 09:06:38.237 -> Value of PM2.5: 48 09:06:38.237 -> Value of PM10: 62 09:06:40.248 -> 09:06:40.248 -> PM measurement number: 6 09:06:40.248 -> Value of PM1: 31 09:06:40.248 -> Value of PM2.5: 48 09:06:40.248 -> Value of PM10: 62 09:06:42.232 -> 09:06:42.232 -> PM measurement number: 7 09:06:42.232 -> Value of PM1: 37 09:06:42.232 -> Value of PM2.5: 59 09:06:42.232 -> Value of PM10: 77 09:06:44.228 -> 09:06:44.228 -> PM measurement number: 8 09:06:44.228 -> Value of PM1: 36 09:06:44.228 -> Value of PM2.5: 59 09:06:44.228 -> Value of PM10: 80 09:06:46.252 -> 09:06:46.252 -> PM measurement number: 9 09:06:46.252 -> Value of PM1: 36 09:06:46.252 -> Value of PM2.5: 60 09:06:46.252 -> Value of PM10: 80 09:06:46.252 -> 09:06:46.252 -> Average PM1: 30 09:06:46.252 -> Average PM2.5: 48 09:06:46.252 -> Average PM10: 63 09:06:46.252 -> Turning OFF PM sensor... 09:06:46.252 -> Measurements from BME280! 09:06:46.252 -> 09:06:46.252 -> 09:06:46.252 -> Measurements from PMSx003! 09:06:46.252 ->

[bfaliszek]

W tych logach jest wszystko OK. Przecież pomiary PM nie są wykonywane ciągle. Po uśpieniu PMS, powinno minąć trochę czasu do ponownego jego włączenia i nowej serii pomiarów. Nie ma w logach nic więcej? Dodatkowe pytanie, użyłeś gotowego .bin czy samemu skompilowałeś kod?

[ookris]

Tak wiem, problem z tym, że po pojawieniu się Measurements from PMSx003! nic się nie dzieje nie ważne jak długo bym czekał. Nie ważne czy mam ustawione pomiary co 5 minut czy co minutę. Za każdym razem smogomierz zawieszał się w tym samym momencie.

Testowałem na dwóch płytach i za każdym razem to samo. Moje ESP: ESP-32 WROOM WiFi+Bluetooth ESP32 NodeMCU Arduino

[bfaliszek]

Nie wiem czy problem jeszcze występuje, ale w ostatnich comitach w branchu DEV skupiłem się głownie na ESP32 i teraz działa prawidłowo z PMS7003.