2DS black screen

[Sorrento6]

After loading armloader and restoring NANDmin.bin with A9lh, it restarts into a dimly lit black screen. I can still boot into Luma and Hourglass, but nothing works on regular boot. Any suggestions?

[Sorrento6]

if it means anything, after downgrading to 2.1, the top screen was distorted...

[NoobleMcScrunchkin]

did you replace the arm9loaderhax.bin with a luma 3ds arm9loaderhax.bin?

Also on a 2DS it is fine if the screen was distorted. The 2ds normally can't go to a firmware that low. arm9loaderhax.bin.zip

[Sorrento6]

is that the link for the luma armloader?

[NoobleMcScrunchkin]

yes, I grabbed the file from the github page

[Sorrento6]

Okay. I'll give it a shot. Thank you!

[NoobleMcScrunchkin]

If you can launch payloads then your installation is fine you probably just need to change that file

[NoobleMcScrunchkin]

if that doesnt work then you might need to use another nand backup

[Sorrento6]

I removed the existing file from the root and replaced it with this one. No dice.

[NoobleMcScrunchkin]

if you have another backup you could try using that. Otherwise i have no idea

[Sorrento6]

Okay. Thanks..

[Sorrento6]

I've reloaded the NANDmin.bin multiple times and went through the troubleshooting page. The 2DS is still able to boot to Luma and Hourglass, but not Sysnand. Still open to other options. Someone, please help!

[NoobleMcScrunchkin]

Can you get into recovery?

[pbanj]

You need to do the 9.2 ctr transfer https://plailect.github.io/Guide/9.2.0-ctrtransfer

[Sorrento6]

My 2ds was a 6.1 originally. Should I still do the 9.2 car?

[Sorrento6]

Ctr

[pbanj]

Yes, luma has issues booting the 6 firmwares

[Sorrento6]

Well, my friend, you called it!! Thanks a ton.

[pbanj]

No prob