Open racleave opened 4 years ago
I will set up the raspberry pi here and see how to get @hammockman logged into it. Any preferred OS? I'll go with Raspbian if not.
raspbian fine
On Thu, 26 Mar 2020 at 11:57, racleave notifications@github.com wrote:
I will set up the raspberry pi here and see how to get @hammockman https://github.com/hammockman logged into it. Any preferred OS? I'll go with Raspbian if not.
— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub https://github.com/hammockman/breather/issues/7#issuecomment-604130222, or unsubscribe https://github.com/notifications/unsubscribe-auth/ABPGRJEXXKATNSJBCM6IPBLRJKD4VANCNFSM4LTZ3F6Q .
This is an issue to deal with design of the controller software, and which hardware it has to interface to. Specific bugs should have their own issues.
We are using a Raspberry Pi 3B+ with a separate LCD screen.
The software has to read various sensors and control 2-6 valves. It also has to have at least two major modes:
There are many variations on these modes, but keeping things simple at this stage is a must.
Here are some is a plot of typical pressures and times (lots more on the web):