search

harbaum / MiSTeryNano

Atari STE MiSTery core for the Tang Nano 20k FPGA
132 stars 17 forks source link

error when flashing the M0S dock station based on BL616/618, what to do #36

Closed tfanatic44 closed 7 months ago

tfanatic44 commented 7 months ago

Unfortunately, when flashing BL616 on the M0S dock station, I receive an error. Am I doing something wrong? Can someone explain to me what's wrong?

[21:53:42.926] - serial type is general [21:53:42.965] - Open COM3 Success [21:53:43.979] - Close COM3 Success [21:53:43.998] - EFUSE_CFG [21:53:43.999] - BOOTHEADER_GROUP0_CFG [21:53:44.034] - Create bootheader using C:\Users\Tomasz\Downloads\Atari St Misterynano\BouffaloLabDevCube-v1.8.9\chips\bl616\img_create_mcu/efuse_bootheader_cfg.ini [21:53:44.036] - Updating data according to <C:\Users\Tomasz\Downloads\Atari St Misterynano\BouffaloLabDevCube-v1.8.9\chips\bl616\img_create_mcu/efuse_bootheader_cfg.ini[BOOTHEADER_GROUP0_CFG]> [21:53:44.043] - Created file len:256 [21:53:44.050] - Create efuse using C:\Users\Tomasz\Downloads\Atari St Misterynano\BouffaloLabDevCube-v1.8.9\chips\bl616\img_create_mcu/efuse_bootheader_cfg.ini [21:53:44.053] - Updating data according to <C:\Users\Tomasz\Downloads\Atari St Misterynano\BouffaloLabDevCube-v1.8.9\chips\bl616\img_create_mcu/efuse_bootheader_cfg.ini[EFUSE_CFG]> [21:53:44.060] - Created file len:512 [21:53:44.069] - Image create path: C:\Users\Tomasz\Downloads\Atari St Misterynano\BouffaloLabDevCube-v1.8.9\chips\bl616\img_create_mcu [21:53:44.070] - Config file: C:\Users\Tomasz\Downloads\Atari St Misterynano\BouffaloLabDevCube-v1.8.9\chips\bl616\img_create_mcu/img_create_cfg.ini [21:53:44.089] - img already have bootheader [21:53:44.092] - Image hash is b'94745365c4b866c44fce871c76e508928ad7c491758124c666ed60abf97c4051' [21:53:44.093] - Header crc: b'7be7f464' [21:53:44.094] - Write flash img [21:53:44.098] - Encrypt efuse data [21:53:44.108] - ========= eflash loader config ========= Traceback (most recent call last): File "core\bflb_mcu_tool.py", line 2538, in program_img_thread File "core\bflb_mcu_tool.py", line 2487, in program_bl616_img File "libs\bflb_img_create.py", line 85, in compress_dir File "libs\bflb_img_create.py", line 56, in check_pt_file IndexError: list index out of range

harbaum commented 7 months ago

I can't tell you as its the bouffalo tool that fails. Maybe the files you are trying to flash weren't downloaded properly and the tool failes to interpret them?

tfanatic44 commented 7 months ago

Is there any other program for Windows 10 to flash it correctly?

harbaum commented 7 months ago

I don't know. But I don't think so.

tfanatic44 commented 7 months ago

Hello, I managed to flash , the error which involved downloading a file with errors from the project's website via a PC, so I downloaded this file to a mobile phone with Android and sent it to the PC using a USB cable. I immediately managed to flash the integrated circuit on the M0S board, thank you you don't need help anymore

tfanatic44 commented 7 months ago

Hello, I solved this problem by downloading the M0S firmware file from the GitHub website from an Android phone and then transmitting the file via a USB cable to the PC. , but a friend from Buffalo gave me another solution Hi The path of the tool should not have spaces

C:\Users\Tomasz\Downloads\Atari St Misterynano\BouffaloLabDevCube-v1.8.9

change to  C:\Users\Tomasz\Downloads\AtariStMisterynano\BouffaloLabDevCube-v1.8.9



jxtan

jxtan@bouffalolab.com

harbaum commented 7 months ago

Upated the INSTALLATION_WINDOWS.md accordingly. Thanks for reporting.