SparkyNZ
commented
2 hours ago I found another hub and gave that a try - same deal.
I remembered I had a USB-Bluetooth wireless adapter for the keyboard/mouse I use with my TV - tried that too - nothing.
FYI the led remains blue on the Nano - doesn't change to green. It's as if the Kickstart has frozen. If there's any other info I can provide you with to help, please let me know.
I tried a few other keyboards I have but they're all Dell USB keyboards. I have a small keyboard but no F12 key unless I use Fn with F2 - that doesn't seem to work either. This time the LED is green.
I just reloaded atartist.fs and that's still working perfectly - even with the small keyboard. I was quite surprised to find that it even worked when I plugged in the mouse and keyboard while it was powered on.. so something definitely up with the Nanomig design it would seem.
FYI I tried the 0,3 Release too (just in case). Same thing with 0,3.
I've been using the same setup for MiSTery and the Vic 20 Nano. I can press F12 to get into the OSD for both of those but with Nanomig I only get the Kickstart 1.3 boot image (the big chunky hand holding a blue floppy).
I'm using the M0S Dock with an old 4-port USB hub.
I tried removing my USB hub, plugged the keyboard directly into the M0S Dock's USB port (via USB C to A adapter). I was able to get into the OSD and boot to Workbench.
Thinking maybe it was a power issue, I tried again with the hub and found that the Kickstart image didn't appear but I was able to get a corrupted OSD screen to appear. Instead of powering the Nano from my PC's USB port, I connected to a 2Amp USB brick but I still have the same issues.
Unfortunately I only have the 1 hub I can try at the moment but I do have another on the way that will connect directly to the M0S dock's USB-C port and I'll give that a try when it arrives in a week or two.