Closed jnimety closed 4 months ago
I did some measuring and test fitting and I think the highlighted surface needs to move down about 2.7mm to expose the full width of the pulley with a bit of additional clearance.
Looks like the STLs you just uploaded address this. Thanks @hartk1213!
Hi @hartk123! While assembling your V0.2 G2Z assembly I noticed that the changes in af036b865ca2576d0537e13751ac57954fb14115 moved the belt offset so it is no longer centered between the two z rails. I've attached a picture showing the change between the current and previous [a]_v0_g2_drive_mount_x1.stl (current on the left, previous on the right). Notice the height difference and position of the belt cutout on the newer part compared to the old.
If there's a CAD available I'm willing to attempt a fix, otherwise it's easy enough to print the older version.
Thanks for taking a look and publishing your designs for others to use.