search

havi0019 / brushless-gimbal

Automatically exported from code.google.com/p/brushless-gimbal
0 stars 0 forks source link

programming issue #2

Open GoogleCodeExporter opened 8 years ago

GoogleCodeExporter commented 8 years ago 
Hi,

 Just assembled one and can't manage to upload the code. 
Using USBasp v2.
What version bootloader should I use? Arduino seems uploading it OK, but then I 
go for firmware seems that USB doesn't do Reset then needed or so.
Any ideas?
Can you please provide step by step flashing guide? 
What fuses should be set?
Thanks!

Original issue reported on code.google.com by virgi...@gmail.com on 15 Apr 2013 at 6:16

GoogleCodeExporter commented 8 years ago 
I have the same or similiar issue.  I can't get the GUI software to work on v48 
and Arduino wont upload any of the firmware or a bootloader.  HELP!

Original comment by jonnyg...@gmail.com on 6 May 2013 at 8:55

GoogleCodeExporter commented 8 years ago 
Its' possible you may have v46 flashed to your controller card. I found that 
the new USB driver from FTDI is not compatible with some v46 flashed cards on 
some Windows XP systems. Delete the FTDI Driver version 2.08.28 on your 
computer. Load previous version 2.08.24 from 
http://www.ftdichip.com/Drivers/VCP.htm website on to your computer. They have 
an executable file if you need. Now open Arduino, with the v48.ino and flash 
the new firmware to you card. You are now ready to program with the latest v48 
GUI.

Original comment by a...@aktv.tv on 8 May 2013 at 6:27

GoogleCodeExporter commented 8 years ago 
I have same issue , I have changed FTDI driver to previous version 2.08.24 , 
can't solve the issue. HELP!! Thanks....

Original comment by spencer....@gmail.com on 13 May 2013 at 2:04

GoogleCodeExporter commented 8 years ago 
I haven't solved it yet, but will report the problem asap!

Virgis

Original comment by virgi...@gmail.com on 13 May 2013 at 6:40

GoogleCodeExporter commented 8 years ago 
I assembled 3 pcs of the board ,all of the board are same issue . please help !!

Original comment by spencer....@gmail.com on 14 May 2013 at 4:25

Attachments:

GoogleCodeExporter commented 8 years ago 
Any body can help me !! I still can't download firmware from USB.

Original comment by spencer....@gmail.com on 17 May 2013 at 9:55

GoogleCodeExporter commented 8 years ago 
I'm using FTDI Driver 2.08.24.0. FTDI Driver 2.08.28.0 does not work for 
Arduino or GUI on my XP laptop.  Had v48 loaded and and able to change PID 
parameters, etc. and saved to board. Downloaded and loaded v49 to board. Now 
when I try and change any parameters PID, max PWM, RC-Min, RC- Max for both 
Pitch and Roll and click save values from gui into board parameters are not 
saved to board, however I do sometimes get the ERROR: error flushing 
"filef77a58": permission denied when triying to save GUI setting to board.

Original comment by a...@comcast.net on 29 May 2013 at 11:07

GoogleCodeExporter commented 8 years ago 
PLEAS HELP ME!!!
i just paid 189 for this from infity hobby and i cant find or open the gui my 
gimbal is over driving bad i would pay $$ to any body who could help me or this 
is going back in the mail to Infity Hobby! my e mail is  awphoto67@yahoo.com my 
cell is 323-717-5775 thanks im on youtub under awcinema

Original comment by awphot...@yahoo.com on 6 Jun 2013 at 11:42

GoogleCodeExporter commented 8 years ago 
[deleted comment]
GoogleCodeExporter commented 8 years ago 
To anyone who has issues with connecting to the board, the FTDI driver version 
that you should use is 2.8.14.0. You can find it in the windows update archive: 
http://catalog.update.microsoft.com/v7/site/ScopedViewRedirect.aspx?updateid=e50
522c1-52bf-4096-b78e-a402eb13294e

good luck

Original comment by vieerv...@gmail.com on 24 Jun 2013 at 6:25

GoogleCodeExporter commented 8 years ago 
I have just successfully changed the Arduino code and flashed the card...I have 
also managed to download the GUI and made that work with the card...founf -46 
to be Fully functional whereas some components of v -49 failed to 
work....Gimbal is working fine...with some exceptions that the motors do not 
hold DURING flight./....works fine on ground...have tied shock mounting the 
gnbal ut it just constantly drives the tilt .... Question...DOES the BOARD have 
part of the IMU on it and DOES the bard have to be Horizontal and in Line with 
the gimbal...

Original comment by tonygord...@gmail.com on 24 Jul 2013 at 6:42

GoogleCodeExporter commented 8 years ago 
I just manage to download firmware
choose from arduino "Arduino mini w/ ATmega 328" no 5V version
programmer "AVRRISP mkII"

Original comment by kstm...@gmail.com on 1 Aug 2013 at 1:24

GoogleCodeExporter commented 8 years ago 
I have programmed but if I remove the board from my computer.
board does not work and the green light flashes quickly

Original comment by fauk...@gmail.com on 19 Nov 2013 at 1:19