This release deliberately contains backwards-incompatible changes. To avoid automatically picking up releases like this, you should either be pinning the exact version of esbuild in your package.json file (recommended) or be using a version range syntax that only accepts patch upgrades such as ^0.22.0 or ~0.22.0. See npm's documentation about semver for more information.
Revert the recent change to avoid bundling dependencies for node (#3819)
This release reverts the recent change in version 0.22.0 that made --packages=external the default behavior with --platform=node. The default is now back to --packages=bundle.
I've just been made aware that Amazon doesn't pin their dependencies in their "AWS CDK" product, which means that whenever esbuild publishes a new release, many people (potentially everyone?) using their SDK around the world instantly starts using it without Amazon checking that it works first. This change in version 0.22.0 happened to break their SDK. I'm amazed that things haven't broken before this point. This revert attempts to avoid these problems for Amazon's customers. Hopefully Amazon will pin their dependencies in the future.
In addition, this is probably a sign that esbuild is used widely enough that it now needs to switch to a more complicated release model. I may have esbuild use a beta channel model for further development.
When transformed, certain whitespace inside JSX elements is ignored completely if it collapses to an empty string. However, the whitespace should only be ignored if the JSX is being transformed, not if it's being preserved. This release fixes a bug where esbuild was previously incorrectly ignoring collapsed whitespace with --jsx=preserve. Here is an example:
// Original code
<Foo>
<Bar />
</Foo>
// Old output (with --jsx=preserve)
<Foo><Bar /></Foo>;
// New output (with --jsx=preserve)
<Foo>
<Bar />
</Foo>;
v0.22.0
This release deliberately contains backwards-incompatible changes. To avoid automatically picking up releases like this, you should either be pinning the exact version of esbuild in your package.json file (recommended) or be using a version range syntax that only accepts patch upgrades such as ^0.21.0 or ~0.21.0. See npm's documentation about semver for more information.
This breaking change is an experiment. People are commonly confused when using esbuild to bundle code for node (i.e. for --platform=node) because some packages may not be intended for bundlers, and may use node-specific features that don't work with a bundler. Even though esbuild's "getting started" instructions say to use --packages=external to work around this problem, many people don't read the documentation and don't do this, and are then confused when it doesn't work. So arguably this is a bad default behavior for esbuild to have if people keep tripping over this.
With this release, esbuild will now omit packages from the bundle by default when the platform is node (i.e. the previous behavior of --packages=external is now the default in this case). Note that your dependencies must now be present on the file system when your bundle is run. If you don't want this behavior, you can do --packages=bundle to allow packages to be included in the bundle (i.e. the previous default behavior). Note that --packages=bundle doesn't mean all packages are bundled, just that packages are allowed to be bundled. You can still exclude individual packages from the bundle using --external: even when --packages=bundle is present.
The --packages= setting considers all import paths that "look like" package imports in the original source code to be package imports. Specifically import paths that don't start with a path segment of / or . or .. are considered to be package imports. The only two exceptions to this rule are subpath imports (which start with a # character) and TypeScript path remappings via paths and/or baseUrl in tsconfig.json (which are applied first).
This release deliberately contains backwards-incompatible changes. To avoid automatically picking up releases like this, you should either be pinning the exact version of esbuild in your package.json file (recommended) or be using a version range syntax that only accepts patch upgrades such as ^0.22.0 or ~0.22.0. See npm's documentation about semver for more information.
Revert the recent change to avoid bundling dependencies for node (#3819)
This release reverts the recent change in version 0.22.0 that made --packages=external the default behavior with --platform=node. The default is now back to --packages=bundle.
I've just been made aware that Amazon doesn't pin their dependencies in their "AWS CDK" product, which means that whenever esbuild publishes a new release, many people (potentially everyone?) using their SDK around the world instantly starts using it without Amazon checking that it works first. This change in version 0.22.0 happened to break their SDK. I'm amazed that things haven't broken before this point. This revert attempts to avoid these problems for Amazon's customers. Hopefully Amazon will pin their dependencies in the future.
In addition, this is probably a sign that esbuild is used widely enough that it now needs to switch to a more complicated release model. I may have esbuild use a beta channel model for further development.
When transformed, certain whitespace inside JSX elements is ignored completely if it collapses to an empty string. However, the whitespace should only be ignored if the JSX is being transformed, not if it's being preserved. This release fixes a bug where esbuild was previously incorrectly ignoring collapsed whitespace with --jsx=preserve. Here is an example:
// Original code
<Foo>
<Bar />
</Foo>
// Old output (with --jsx=preserve)
<Foo><Bar /></Foo>;
// New output (with --jsx=preserve)
<Foo>
<Bar />
</Foo>;
0.22.0
This release deliberately contains backwards-incompatible changes. To avoid automatically picking up releases like this, you should either be pinning the exact version of esbuild in your package.json file (recommended) or be using a version range syntax that only accepts patch upgrades such as ^0.21.0 or ~0.21.0. See npm's documentation about semver for more information.
This breaking change is an experiment. People are commonly confused when using esbuild to bundle code for node (i.e. for --platform=node) because some packages may not be intended for bundlers, and may use node-specific features that don't work with a bundler. Even though esbuild's "getting started" instructions say to use --packages=external to work around this problem, many people don't read the documentation and don't do this, and are then confused when it doesn't work. So arguably this is a bad default behavior for esbuild to have if people keep tripping over this.
With this release, esbuild will now omit packages from the bundle by default when the platform is node (i.e. the previous behavior of --packages=external is now the default in this case). Note that your dependencies must now be present on the file system when your bundle is run. If you don't want this behavior, you can do --packages=bundle to allow packages to be included in the bundle (i.e. the previous default behavior). Note that --packages=bundle doesn't mean all packages are bundled, just that packages are allowed to be bundled. You can still exclude individual packages from the bundle using --external: even when --packages=bundle is present.
The --packages= setting considers all import paths that "look like" package imports in the original source code to be package imports. Specifically import paths that don't start with a path segment of / or . or .. are considered to be package imports. The only two exceptions to this rule are subpath imports (which start with a # character) and TypeScript path remappings via paths and/or baseUrl in tsconfig.json (which are applied first).
Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting @dependabot rebase.
Dependabot commands and options
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually
- `@dependabot show ignore conditions` will show all of the ignore conditions of the specified dependency
- `@dependabot ignore major version` will close this group update PR and stop Dependabot creating any more for the specific dependency's major version (unless you unignore this specific dependency's major version or upgrade to it yourself)
- `@dependabot ignore minor version` will close this group update PR and stop Dependabot creating any more for the specific dependency's minor version (unless you unignore this specific dependency's minor version or upgrade to it yourself)
- `@dependabot ignore ` will close this group update PR and stop Dependabot creating any more for the specific dependency (unless you unignore this specific dependency or upgrade to it yourself)
- `@dependabot unignore ` will remove all of the ignore conditions of the specified dependency
- `@dependabot unignore ` will remove the ignore condition of the specified dependency and ignore conditions
Bumps the dependencies group with 6 updates in the / directory:
20.14.8
20.14.10
7.13.1
7.15.0
7.13.1
7.15.0
0.21.5
0.23.0
6.2.0
6.4.0
5.5.2
5.5.3
Updates
@types/node
from 20.14.8 to 20.14.10Commits
Updates
@typescript-eslint/eslint-plugin
from 7.13.1 to 7.15.0Release notes
Sourced from
@typescript-eslint/eslint-plugin
's releases.... (truncated)
Changelog
Sourced from
@typescript-eslint/eslint-plugin
's changelog.... (truncated)
Commits
2865d31
chore(release): publish 7.15.02671de5
feat(eslint-plugin): back-port new rules around empty object types from v8 (#...05142c5
fix(eslint-plugin): [no-unsafe-call] differentiate a types-error any from a t...a466e07
fix: disableEXPERIMENTAL_useProjectService
indisabled-type-checked
shar...3694d8f
fix(eslint-plugin): [no-unsafe-return] differentiate a types-error any from a...9dba021
feat(eslint-plugin): [array-type] detectReadonly\<string[]>
case (#8752)b4fe94f
chore(release): publish 7.14.1f29150f
fix(eslint-plugin): [prefer-nullish-coalescing] ensure ternary fix does not r...9b7731d
fix(eslint-plugin): [prefer-nullish-coalescing] treat enums and literals as t...dfc4469
chore(release): publish 7.14.0Updates
@typescript-eslint/parser
from 7.13.1 to 7.15.0Release notes
Sourced from
@typescript-eslint/parser
's releases.... (truncated)
Changelog
Sourced from
@typescript-eslint/parser
's changelog.Commits
2865d31
chore(release): publish 7.15.0b4fe94f
chore(release): publish 7.14.1dfc4469
chore(release): publish 7.14.0Updates
esbuild
from 0.21.5 to 0.23.0Release notes
Sourced from esbuild's releases.
... (truncated)
Changelog
Sourced from esbuild's changelog.
... (truncated)
Commits
9d50680
publish 0.23.0 to npmac7fd04
Revert "fix #1874: node defaults to--packages=external
" (#3820)626ac2c
fix #3818: preserve collapsed jsx whitespace7c2eb2e
hashbang syntax is part of es202380c6e6e
publish 0.22.0 to npm196dcad
fix #1874: node defaults to--packages=external
3f57db8
release notes for #353991663db
Provide API to create a custom esbuild CLI with plugins (#3539)e01c0e0
also mention #3665 in release notes65711b3
release notes for #3674Updates
eslint-plugin-promise
from 6.2.0 to 6.4.0Release notes
Sourced from eslint-plugin-promise's releases.
Commits
ecbce9f
feat: add support for flat config (#479)4dfc8a7
feat: add support for eslint v9 (#478)afbda82
chore(deps-dev): bump braces from 3.0.2 to 3.0.3 (#477)Updates
typescript
from 5.5.2 to 5.5.3Release notes
Sourced from typescript's releases.
Commits
f0e9921
Bump version to 5.5.3 and LKG738bd60
Cherry-pick #58966 to release-5.5 (#59002)Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting
@dependabot rebase
.Dependabot commands and options
You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot show